How To Use Powder Filler After Foaming Gaps On Walls And Woodwork
Жүктеу.....
Пікірлер: 67
@miketaicee85704 жыл бұрын
Just been out to buy my BIN primer for all those jobs I need to do around the house. I even got some expanding foam. I may be a DIYer but all I have to do if I get stuck is stick one of your videos on. Cheers Buddy !!
@PaintingandDecorating
4 жыл бұрын
Thank you.
@SteS4 жыл бұрын
Foam is a beaut for behind skirting. Loving the series lads. Still love my 20 min easi-fill for small jobs like this. Also I found that by using a good LED work light shining across the wall you can spot defects more easily.
@PaintingandDecorating
4 жыл бұрын
Thanks, yes we show that in some other videos.
@dieNadel014 жыл бұрын
So comprehensive, so useful! Many thanks for this series.
@PaintingandDecorating
4 жыл бұрын
Thanks your welcome.
@popandu11703 жыл бұрын
exceptional video mate - showing all of the important intricate details of what one would find on a project like this - thanks very much for putting the energy in to make these videos - they are so helpful! : )
@johnhigginbotham82914 жыл бұрын
Great video! Thanks for uploading.
@PaintingandDecorating
4 жыл бұрын
Thank you.
@richardpearson42483 жыл бұрын
Great video nice job 🇬🇧👍🏻
@darrenyates48204 жыл бұрын
Another great video top job mate 👍
@PaintingandDecorating
4 жыл бұрын
Thanks.
@jamesbrannigan47474 жыл бұрын
Great prep proper old school 👍👍
@PaintingandDecorating
4 жыл бұрын
Thanks.
@abdeenmomeen60383 жыл бұрын
Grate video thanks your work very clean
@PaintingandDecorating
3 жыл бұрын
Thank you.
@rhyslloyd31294 жыл бұрын
Cut down the sides of a 10L tub to make a mixing tray much quicker
@DecorDev4 жыл бұрын
I think you are doing a great job with your video's Thank you!!! Trying to do the same on my Channel but it does take a lot of dedication, well done!!!
@PaintingandDecorating
4 жыл бұрын
Thank you, and yes takes some dedication as you know. Have subscribed to your channel.
@DecorDev
4 жыл бұрын
@@PaintingandDecorating Thank you, much appreciated
@bittertruth65753 жыл бұрын
Masterclass!
@PaintingandDecorating
3 жыл бұрын
Thanks.
@spinx12004 жыл бұрын
Top man . Top job 👍🏻👍🏻👍🏻😉
@PaintingandDecorating
4 жыл бұрын
Thanks
@briclark61534 жыл бұрын
Top job 🤙
@PaintingandDecorating
4 жыл бұрын
Thank you
@awt06nmu4 жыл бұрын
Love all your videos and trying to fix cracks between my walls (some plasterboard some brick/plastered) and ceilings which were skimmed 2 years ago to hide artex. Nearly every room has cracks :( some times you use watered pva some times DIM primer, when and why do you use primer?
@PaintingandDecorating
4 жыл бұрын
Thanks. usually B.I.N. will be used for small jobs and bare wood.
@goonzjav2 жыл бұрын
Whats the reason you dont just fill the entire gaps/holes with filler rather than using foam first?
@reesernhr8364 жыл бұрын
Another great guide 👍🏻
@PaintingandDecorating
4 жыл бұрын
Thanks
@goonzjav2 жыл бұрын
I found polyfilla cracks when i was filling my edges up i was using powder and also the ready mixed stuff in a tube
@DG-nn8zt Жыл бұрын
Quick question if you were doing a whole room where it was wallpapered say similar bare wall to this one, would it be quicker to reskim or patch like you’ve done here?
@mrdeafa25
7 ай бұрын
I have the same question and I guess the absence of an answer tells the story. Its a testament to the mans abilities that he gets a decent finish on this wall but it surely is quicker and cheaper to skim the wall.
@ratchriat17164 жыл бұрын
around the skirting board and the door frame why you choose that method with a filler rather than decorating caulk enjoyed the video.
@PaintingandDecorating
4 жыл бұрын
Thanks, the foam helps no need for caulk.
@Khaled914 жыл бұрын
In your other video with the 2 million views, you didn't bother with the undercoat plaster after putting expanding foam in the crack. You went straight to the Polyfilla. Why did you put undercoat plaster this time round? Cause I've got deep cracks all over my flat...I've cut them until all the loose material has come off (an inch and half deep). Shall I copy what you do in this video or your other video?
@PaintingandDecorating
4 жыл бұрын
Both are fine, it's a cheaper filler to use undercoat plaster.
@Khaled91
4 жыл бұрын
@@PaintingandDecorating but you still used the Polyfilla on top of the undercoat plaster?
@PaintingandDecorating
4 жыл бұрын
@@Khaled91 yes it sands better. thanks
@michaelstojsavljevic84534 жыл бұрын
Ever use easi fill at all mate? Great work as always I’m doing some decorating at home now I’ve gone quiet
@PaintingandDecorating
4 жыл бұрын
Yes it's okay. Thanks
@michaelstojsavljevic8453
4 жыл бұрын
Painting and Decorating I swear by it dries quick and sands well
@acropolisnow9466
4 жыл бұрын
@@michaelstojsavljevic8453 Keep saying it but Toupret TX110 solves every situation!
@popandu1170
3 жыл бұрын
@@acropolisnow9466 What is it's advantage over something like easifill?
@SlothyWoffy4 жыл бұрын
Great video.
@PaintingandDecorating
4 жыл бұрын
Thank you.
@richardowen2159 Жыл бұрын
If plaster has come away from the wall can it be pushed back...or is it smack it off and replaster?
@PaintingandDecorating
Жыл бұрын
In some cases you can glue it back by making small holes and filling. Just all depends what's going on. Thanks
@johnlambert57324 жыл бұрын
Got to ask, why only take the woodchip off the one wall ?
@PaintingandDecorating
4 жыл бұрын
It's at home and it's a rented house so just enough for a demo. Although I may end up stripping the rest, especially the chimney breast. Do some videos on corners and bullnose lining paper. Thanks
@johnlambert5732
4 жыл бұрын
@@PaintingandDecorating Thanks. Love your videos great watching a true professional at work.
@gileswelham26193 жыл бұрын
That wall needed re skimmimg. I cant believe you got a decent surface to emulsion doing that prep
@PaintingandDecorating
3 жыл бұрын
Watch the other videos and see.
@user-le7op9ir5fАй бұрын
silly question, why did you use foam instead of caulk?
@PaintingandDecorating
Ай бұрын
I stopped using caulk because it takes days to dry fully and can shrink back and crack. Thanks
@jaynehinchliffe8022 жыл бұрын
What's the difference between using wet mix instead of expanding foam and some dry light weight filler??? Cheers
@PaintingandDecorating
2 жыл бұрын
expanding foam removes all movement.
@jaynehinchliffe802
2 жыл бұрын
@@PaintingandDecorating yea i use expanding foam.. but what's the difference between the wet mix and a light weight filler to finish? Cheers
@jaynehinchliffe802
2 жыл бұрын
@@PaintingandDecorating you are the biggest jinx lol on a job for a friend of a friend he sent pics so I didn't bother to go and quote in person... Been here 3 hours prepping no paint out yet 😩😩 suicidal Sunday or what. Everything was fine until I watched these videos haha
@rachw22433 жыл бұрын
I am filling the top of a skirting board. I can only apply expanding foam in short lengths of the skirting where the gap to the wall is big enough to put expanding foam the rest is just a small crack the whole way along. Can i use polyfilla the whole way along the skirting to cover the less wide gaps or should I use decorators caulk?
@PaintingandDecorating
3 жыл бұрын
Once you have used the foam you can fill the rest with pollyfila.. thanks
@rachw2243
3 жыл бұрын
@@PaintingandDecorating thank you so much
@mal36894 жыл бұрын
Slam the door, filler falls out 😂
@PaintingandDecorating
4 жыл бұрын
the foam helps it to stay put.
@Abid.Z774 жыл бұрын
You should have mixed abit of pva into the Undercoat plaster
Пікірлер: 67
Just been out to buy my BIN primer for all those jobs I need to do around the house. I even got some expanding foam. I may be a DIYer but all I have to do if I get stuck is stick one of your videos on. Cheers Buddy !!
@PaintingandDecorating
4 жыл бұрын
Thank you.
Foam is a beaut for behind skirting. Loving the series lads. Still love my 20 min easi-fill for small jobs like this. Also I found that by using a good LED work light shining across the wall you can spot defects more easily.
@PaintingandDecorating
4 жыл бұрын
Thanks, yes we show that in some other videos.
So comprehensive, so useful! Many thanks for this series.
@PaintingandDecorating
4 жыл бұрын
Thanks your welcome.
exceptional video mate - showing all of the important intricate details of what one would find on a project like this - thanks very much for putting the energy in to make these videos - they are so helpful! : )
Great video! Thanks for uploading.
@PaintingandDecorating
4 жыл бұрын
Thank you.
Great video nice job 🇬🇧👍🏻
Another great video top job mate 👍
@PaintingandDecorating
4 жыл бұрын
Thanks.
Great prep proper old school 👍👍
@PaintingandDecorating
4 жыл бұрын
Thanks.
Grate video thanks your work very clean
@PaintingandDecorating
3 жыл бұрын
Thank you.
Cut down the sides of a 10L tub to make a mixing tray much quicker
I think you are doing a great job with your video's Thank you!!! Trying to do the same on my Channel but it does take a lot of dedication, well done!!!
@PaintingandDecorating
4 жыл бұрын
Thank you, and yes takes some dedication as you know. Have subscribed to your channel.
@DecorDev
4 жыл бұрын
@@PaintingandDecorating Thank you, much appreciated
Masterclass!
@PaintingandDecorating
3 жыл бұрын
Thanks.
Top man . Top job 👍🏻👍🏻👍🏻😉
@PaintingandDecorating
4 жыл бұрын
Thanks
Top job 🤙
@PaintingandDecorating
4 жыл бұрын
Thank you
Love all your videos and trying to fix cracks between my walls (some plasterboard some brick/plastered) and ceilings which were skimmed 2 years ago to hide artex. Nearly every room has cracks :( some times you use watered pva some times DIM primer, when and why do you use primer?
@PaintingandDecorating
4 жыл бұрын
Thanks. usually B.I.N. will be used for small jobs and bare wood.
Whats the reason you dont just fill the entire gaps/holes with filler rather than using foam first?
Another great guide 👍🏻
@PaintingandDecorating
4 жыл бұрын
Thanks
I found polyfilla cracks when i was filling my edges up i was using powder and also the ready mixed stuff in a tube
Quick question if you were doing a whole room where it was wallpapered say similar bare wall to this one, would it be quicker to reskim or patch like you’ve done here?
@mrdeafa25
7 ай бұрын
I have the same question and I guess the absence of an answer tells the story. Its a testament to the mans abilities that he gets a decent finish on this wall but it surely is quicker and cheaper to skim the wall.
around the skirting board and the door frame why you choose that method with a filler rather than decorating caulk enjoyed the video.
@PaintingandDecorating
4 жыл бұрын
Thanks, the foam helps no need for caulk.
In your other video with the 2 million views, you didn't bother with the undercoat plaster after putting expanding foam in the crack. You went straight to the Polyfilla. Why did you put undercoat plaster this time round? Cause I've got deep cracks all over my flat...I've cut them until all the loose material has come off (an inch and half deep). Shall I copy what you do in this video or your other video?
@PaintingandDecorating
4 жыл бұрын
Both are fine, it's a cheaper filler to use undercoat plaster.
@Khaled91
4 жыл бұрын
@@PaintingandDecorating but you still used the Polyfilla on top of the undercoat plaster?
@PaintingandDecorating
4 жыл бұрын
@@Khaled91 yes it sands better. thanks
Ever use easi fill at all mate? Great work as always I’m doing some decorating at home now I’ve gone quiet
@PaintingandDecorating
4 жыл бұрын
Yes it's okay. Thanks
@michaelstojsavljevic8453
4 жыл бұрын
Painting and Decorating I swear by it dries quick and sands well
@acropolisnow9466
4 жыл бұрын
@@michaelstojsavljevic8453 Keep saying it but Toupret TX110 solves every situation!
@popandu1170
3 жыл бұрын
@@acropolisnow9466 What is it's advantage over something like easifill?
Great video.
@PaintingandDecorating
4 жыл бұрын
Thank you.
If plaster has come away from the wall can it be pushed back...or is it smack it off and replaster?
@PaintingandDecorating
Жыл бұрын
In some cases you can glue it back by making small holes and filling. Just all depends what's going on. Thanks
Got to ask, why only take the woodchip off the one wall ?
@PaintingandDecorating
4 жыл бұрын
It's at home and it's a rented house so just enough for a demo. Although I may end up stripping the rest, especially the chimney breast. Do some videos on corners and bullnose lining paper. Thanks
@johnlambert5732
4 жыл бұрын
@@PaintingandDecorating Thanks. Love your videos great watching a true professional at work.
That wall needed re skimmimg. I cant believe you got a decent surface to emulsion doing that prep
@PaintingandDecorating
3 жыл бұрын
Watch the other videos and see.
silly question, why did you use foam instead of caulk?
@PaintingandDecorating
Ай бұрын
I stopped using caulk because it takes days to dry fully and can shrink back and crack. Thanks
What's the difference between using wet mix instead of expanding foam and some dry light weight filler??? Cheers
@PaintingandDecorating
2 жыл бұрын
expanding foam removes all movement.
@jaynehinchliffe802
2 жыл бұрын
@@PaintingandDecorating yea i use expanding foam.. but what's the difference between the wet mix and a light weight filler to finish? Cheers
@jaynehinchliffe802
2 жыл бұрын
@@PaintingandDecorating you are the biggest jinx lol on a job for a friend of a friend he sent pics so I didn't bother to go and quote in person... Been here 3 hours prepping no paint out yet 😩😩 suicidal Sunday or what. Everything was fine until I watched these videos haha
I am filling the top of a skirting board. I can only apply expanding foam in short lengths of the skirting where the gap to the wall is big enough to put expanding foam the rest is just a small crack the whole way along. Can i use polyfilla the whole way along the skirting to cover the less wide gaps or should I use decorators caulk?
@PaintingandDecorating
3 жыл бұрын
Once you have used the foam you can fill the rest with pollyfila.. thanks
@rachw2243
3 жыл бұрын
@@PaintingandDecorating thank you so much
Slam the door, filler falls out 😂
@PaintingandDecorating
4 жыл бұрын
the foam helps it to stay put.
You should have mixed abit of pva into the Undercoat plaster
I take it you don't like sight work