Great camera angles! Thanks for sharing.

Nice one

Excelente una muy buena clase de esta maravillosa herramienta, Saludos desde Sonora México *LIKE !!!*

5:28 with comment at 5:45, that's what the washer is for. You tossed the new one aside at 1:08 and did not reinstall it at 7:31

@OneTrickTech

2 жыл бұрын

does not fit onto the rack

I got one of these to do my inner tie rods and mine are round no flat spots lol so I couldn't use it

@OneTrickTech

2 жыл бұрын

yea for those you probably need the universal tie rod removal or a pipe wrench

I can't get the f n thing to stay on...I got the tight fight...hammered it on, still slips off.

@OneTrickTech

Жыл бұрын

do you have the inner tie rods with the round end?

@AFatherToTheFatherless

Жыл бұрын

Get the other tool that is U shaped. This one sucks

Mine will not break loose with the tool it’s grabbing it and all any tips ??

@OneTrickTech

Жыл бұрын

need to heat it up with a propane torch. They are installed with some lock tite so use heat to and it will help you loosen it.

@wyattstrength2418

Жыл бұрын

Will a possible actleyene torch work? Don’t have a propane bottle

And the boot goes over it and no grease?

@OneTrickTech

9 ай бұрын

no need for grease just put loctite on the thread for the inner tie rod

I got what looks the exact same tool but it kept slipping on the nut . Not getting a good grip . I got tool rental from OReillys. I got the closest wrench adapter to the nut and read the instructions. I locked it in place with the locking mechanism. Still no luck. Tomorrow I’ll try again. I used it at junkyard and couldn’t get it off . Finally just bought it at AZ . Tomorrow try to get the one off my 15 Ford Fusion SE 2.5 L and put in the new one . Anything you can advise?

@OneTrickTech

9 ай бұрын

trying to heat up the joint with a small torch, they have locktite on them which makes them very tight. Heat it up for a solid 2min and then try again with the tool

@frankmontez6853

9 ай бұрын

@@OneTrickTech that weakens the loctite ?

@OneTrickTech

9 ай бұрын

yes@@frankmontez6853

@chaycecayenne37

4 ай бұрын

I had this same problem. Did you ever get it to work?

@frankmontez6853

4 ай бұрын

@@chaycecayenne37 no

I just used one of this on my envoy. Got a loaner tool from o'Reilly's. Costed $104 after tax. Should get a full refund when its returned. Have to admit it's a pain to use but it does work. Next time I'll just buy a different version from Amazon.

@jayb.8460

2 жыл бұрын

You should have just bought it you never know when family or friends might need help.

@LHGII

Жыл бұрын

Buy the tool...now you got a side skill to charge your family...lol

When installing the inner tie rod should you clean the threads, dry, and put Loctite Blue on the threads of the new tie rod?

@OneTrickTech

Жыл бұрын

yes always

This tool is a nightmare to get on.

That wasn't the correct size, it was too big, but i guess it still worked for you.

Do yourself a favour next time... turn the wheel to extend the rack towards you.

@johnnywood8082

Жыл бұрын

Yes!!

Glad my 03 F150 didn't need this...seems like a pain in the a$$

😅 Dude wastes two minutes of our lives showing us how to lock the tool and then figures out he has to take it apart before putting it on the tie rod. That was painful to watch.

@loomspace

5 ай бұрын

I was thinking 'here give me the damn thing I'll show you how it works' 😆

Don't use this tool this tool sucks! Get the one that looks like a U shape!

I hate this tool lol