One of the selling points for oil-wax finishes is the ease of repair, from a stain or a scratch. Will the ceramic coating interfere with that? Does the ceramic coating have to be stripped somehow before re-applying the oil for a repair?

@liquidrockaquatics3900

Жыл бұрын

I don’t know I have found great results with a coat of polyurethane, buffing it with car wax, and then spraying ceramic coating on it. Thus far, I’ve never had anything get damaged. Edit: I have only used it on table tops. That way, I have never done it to chairs or anything like that.

@Hlilii

9 ай бұрын

If it is similar to automotive ceramic coatings the ceramic coating will act as a protective layer over the wood so if a stain or scratch has occurred the ceramic coating has probably already been removed.

@monkyebrain

7 ай бұрын

Bingo. Why I stick with shellac.

Thanks for tutorials, good to see Charlie working ❤

@BlackForestWoodCo

Жыл бұрын

Thank you as always Maddie 😊😊

Great video!!! Enjoyed watching a demonstration of your new product. As always, you and your team are consummate professionals. Appreciate your explanation of why your products are superior. Glad to see Charlie back in action. Dylan, glad to see you out of the finger splint. Outstanding job!!!!

@BlackForestWoodCo

Жыл бұрын

Thank you very much John! We’re very proud of what we have developed. You’ll love next weeks video, it will feature our first ever burl and resin door!

@alcolyles8914

Жыл бұрын

@@BlackForestWoodCo Once again great video. My question is how much coverage available per 10 ml bottle?

Charlie is keeping a close eye on you, just to make sure you are doing the application correctly. Nice product and good information - Thanks. Stay safe to all BFWC crew.

@BlackForestWoodCo

Жыл бұрын

I’m really not sure what we’d do without Charlie! Thanks Robert!

Very well done Dylan. Blessings!

@BlackForestWoodCo

Жыл бұрын

Thanks Timothy! 🙏

Just a warning. I used the ceramic base and top coat on a few pieces and it worked great. Last week I just used it on a 10’ conference table I am making for a bank and the top coat looked awful. I applied it the same as always, exactly according the instructions and it was uneven and streaky and made the whole table look bad. You could see each pass in the light and it went from a totally even uniform coat to an unprofessional mess. I called Black Forest and asked if there was anything I could do to fix it. I was told “you’re the second person today who’s called with that problem, sometimes that just happens, there’s nothing you can do except sand it down and refinish it” (which is exactly what I ended up having to do). Just a warning, you should be prepared to have to refinish your work if this messes up and don’t expect much help if you call.

@BlackForestWoodCo

Жыл бұрын

Hey Christopher! I apologize for the unsatisfactory response from our staff. They always do their best but sometimes we fall short on expectations. I’d be more than happy to speak to you about this personally and try and troubleshoot some of your issues. The top coat can be finicky but with a few tips we should be able to get it looking good. Please send me an email directly and we’ll set up a time to talk. dylan@blackforestwood.com

@ryanfitz95

Жыл бұрын

Had the same problem. For paying so much it’s quite frustrating to have the product not work oiy

@katiedotson704

9 ай бұрын

I was preparing to ask if this Ceramic coating would work on gun stocks. But if there is a phantom "WTH Syndrome" going on, I will look further. I am not the most experienced with paint and finishes and can manufacture a disaster on my own. But with thought ans reflection I can usually figure out where I blew it. Hopefully, Black Forest will get this figured out.

@BlairCarlyle

9 ай бұрын

@@katiedotson704 since then I’ve used Blacktail Studio’s N3 nano finish and it goes on a lot more evenly than the Black Forest!

@mountdoomee

6 ай бұрын

I'm curious, how much of an area did you do at one time? Maybe you did too large on an area at once so it cured on you?

How long do you wait to apply the ceramic coating over your final coat of Osmo Polyx or Rubio monocoat? Just wondering how long you have found for those oil/wax products to be cured enough to accept the ceramic. Thank you.

I purchased and did a test with the old formula, base and top, over two coats of Rubio Monocoat. Was very disappointed that after a ‘glass of ice water test’ I got the same water rings on samples with or without the ceramic coatings. Did two base and one top. Followed directions and waited a week after application before testing. Really like your channel and you guys do awesome work though. You create some very nice pieces!

@BlackForestWoodCo

Жыл бұрын

It’s always hard to offer troubleshooting without seeing the piece but those should not be the kind of results you’re getting. If you want to send me an email I’d be happy to discuss in more detail! dylan@blackforestwood.com

@db2403

Жыл бұрын

@@BlackForestWoodCo email sent with pictures. Thanks for taking a look.

@db2403

Жыл бұрын

I never received a reply to the email I sent. How about doing a video with an actual test so expectations of results would be known? Would be nice to see a test with and without the ceramic coating and versus the two part poly that the spray shop applies. Do a ‘glass of ice water’ test at 15 minute increments up to an hour. The results from my testing were not impressive. Thanks.

@MegaFregel

Жыл бұрын

@@db2403 Theyre just selling snake oil to you.

@Slice-Darryl

Жыл бұрын

@@db2403 did anything happen since then?

Very informative, thank you.

@BlackForestWoodCo

Жыл бұрын

Thanks Fred!!

Great video! Quick question, does the Top Coat have to go over any of the base coats or are they sufficient on their own?

What are you spraying on the buffing towel? And how long after base coat application do you start buffing? I’m sorry to say but… why are these things not addressed in the video? Or is there another video that explains the process better? I say this with respect. Thank yiu

That looks great whatever level you go mabey I should give it a try

@BlackForestWoodCo

Жыл бұрын

Thanks man! We’re very happy with the products

Dillan, do the ceramic coatings have any UV resistance, such as that required for outdoor applications??

Recently used your previous formula on a walnut/black epoxy table and looks great. What would be a safe product to use for cleaning.

a proper scratch test with different weights applied would be interesting

Wow, Charlie put in a full shift and then some in this one lol. Great video, very informative.

@BlackForestWoodCo

Жыл бұрын

Haha he sure did! Thanks John!

You are getting so good with these posts. Natural and informative. Your friends and family must be proud of what you are all doing together.

@BlackForestWoodCo

Жыл бұрын

Thank you Scott! I couldn’t do it without our amazing team, we have the best staff!

Recently watched the resin door, which was awesome, and just new to using resins and wanted to do some exterior work, but many state resin does not hold up well outdoors. although you mention urethane resin was used for the doors, do you add extra protection to that for UV exposure?

I can see this being a very good finish for turnings!! What is the shelf life for the water base products? Great info!!!

When you wipe the graphine finish off with the second microfiber cloth you spray that cloth. Are you simply spraying the cloth with water? Thanks.

I still have some of your solvent based ceramic coating. Can they be used in combination w/ the new water based coating? Also, how does it react to a heat....a hot cup, for instance?

Looking good, Lil Charlie.!.!.!

@BlackForestWoodCo

Жыл бұрын

He says thank you!!

Hi Dylan, i am going to try your ceramic coating. what ceramic coating would be suitable for putting over the top of a walnut / epoxy river table with odies oil on. I would be grateful if you can advice me. I am new to epoxy river tables but i have made my first and it turned out really good. Can you give me a little advice on sanding, i used my sander at 7500 rmp and move the sander slowly over the epoxy, is this to fast a speed on the epoxy, Cheers Dylan,

Hi @BlackForestWoodCo, can recomend what protection/product is good for new table with laquer finish?

hello I have a concern about my finish on my river table. I used a ceramic that was desined for cars. Note i made a misstake and would like to correct it. I used Rudio mono than put on the wrong ceramic finish How do i go about fixing ? do I resand from 180 to 320 then put on your maintanence oil that i have now and reapply ceramic diamond base coat and top coat that i now have?? Thank you in advance Ben

Hoping you'll get a U.S based distributor. Shipping costs are crazy expensive for a couple hundred ml of product. I'll be lined up waiting for the doors (or website) to open if you ever expand to US distributor. 🙂

@BlackForestWoodCo

Жыл бұрын

Hopefully one day! We do offer free shipping on any purchases over $300 CAD!

@jimhatch5873

Жыл бұрын

@@BlackForestWoodCo I did see that - I'll be back when the Diamond comes in. 👍

Hi, can you use the water base finish product over an existing Rubio topcoat ? Thanks

What coat should I buy to go over epoxy resin, and how soon can I apply it?

would this coating be easy to apply to a non flat surface, such as a bowl or vase?

Is it as simple as reapplying another top coat layer every year, two, five with your previous and new ceramic products? Or do you need to resand the surface first and re do the process?

@BlackForestWoodCo

Жыл бұрын

No re sanding is necessary unless there is damage that has went though the finish (like we had on our table). Otherwise you can just go directly to the ceramic!

I love that table with the little bubble when I’m in there shopping 😢

Very nice. How does a water based formula coat over an oil finish 🤔. Just curious. Love all your projects. Keep the videos coming.

@mattarmistead

Жыл бұрын

my understanding is the water is the carrier of the protectant (the graphene) and when the water evaporates as it dries and cures, it leaves behind the protectant on the surface.

I would recommend using a better codec for your videos. If you pay close attention when you swipe the cloth over the tape markings, you can see artifacts when your hand with the cloth leaves the green line of the tape.

@hualon

4 ай бұрын

This is the kind of excellence I would appreciate in more KZread comments. A great point.😊

Would this be a good product for a timber bicycle frame finished in an epoxy clear coat (or something better?)?

Great video. A lot of information was given. I hope to try some of these products. I saw this on a previous video by someone else. Has your company made an epoxy table with a mastodon tusk. or any other large fossils?

@BlackForestWoodCo

Жыл бұрын

Haha no not yet! I cannot wait to see what Cam at Blacktail does with his though!

@jumpingjacks5558

Жыл бұрын

@@BlackForestWoodCo I know. It should be an awesome table. It would look awesome to put smaller dinosaur skeleton in epoxy. Like a Jurassic Park Theme.

Would the epoxy look clear if you applied this after sanding or do you need to put that oil on first?

Great video as always! Have you got distribution channels in Australia? I am looking at buying some products for myself, but could also help you with if that's something you would be interested into implementing.

I love the idea of graphene for this coating! I'm curious about using a wood oil and then your ceramic coating for a kitchen table -- with kids and all kinds of mess. Is the new water-based graphene product "food safe"? (I say that know that "food safe" means different things)

Just exquisite, could I use this on regular furniture? Lovely!!!

@BlackForestWoodCo

Жыл бұрын

Absolutely you can!

@metropcs7560

Жыл бұрын

So beautiful, truly a gift of skill.

Would these be compatible with other finishes like lacquer?

Can you use these ceramic coatings over hardwax oils like Osmo PolyX?

Dear Black Forest, Thanks for making these products. I’ve used your previous formula and worked great. I look forward to using this new water based formula. You guys do great work over there. Oh and give Charlie some treats. He looks pissed. Always been put on camera with no pay. Sincerely, Dick Head

very nice i like that 👍

Would black ceramic coating work on a moble bookcase urethane finish ? I plan on putting a wood grain formica on the shelves. The ceramic gold protective finish would be for the intwrior and exterior walls. The top self will have an epoxy beach and ocean design . Thank you for your help and the knowledge you share with us.

Are all your products safe for indirect food contact. For example a butcher block kitchen counter?

7:56 - damn straight mate. Woot woot Charlie…..🐶

@BlackForestWoodCo

Жыл бұрын

Gotta love Charlie 🐶

Can you use the new ceramic coating over the top of the old one once the old needs a re-coat?

@BlackForestWoodCo

Жыл бұрын

Yes you can! They are fully compatible with each other

What do you use to stop the application pad from destroying the hook and loop disk

@BlackForestWoodCo

Жыл бұрын

We don’t usually put the application pads on a sander, just the microfibres to buff off excess. We will use an interface pad when we do that

Hi guys I used your ceramic product a couple of weeks ago and was wondering if I can reapply the base coat and top coat over a table I already applied ceramic coating to? Thanks Rich @ Ohio River Tables

@flagman40

Жыл бұрын

@blackforestwoodco581 what’s the gift?

Is the water solvent coating food safe once cured? Great work as usual. ♥

Hi. What is the thickness of the finish (oil+ceramic and top coating)?

I saw you spray your cloth.. the process of ceramic is apply, and then buff- but do you spray your buff cloth first?

can this be applied heavily, many coats, sanded then polished?

Thanks! Last time I checked, you guys did not offer international shipping. Is this still the case? Will this change?

@BlackForestWoodCo

Жыл бұрын

It is about to change in a month! We are setting up a warehouse in the EU and India. This will help us serve a much larger market!

@yoelai

Жыл бұрын

@@BlackForestWoodCo Thank you! Say hi to Charlie for me plz 😋

I am fascinated by this finish, what is your product sales page that you use? Are you in the United States or where? thank you so much

@BlackForestWoodCo

Жыл бұрын

Hi, we're located in Calgary Canada. You can just get it off our website, I'll link it: blackforestwood.com/collections/black-forest-ceramics-1

Has anyone compared this to N3 Nano from Blacktail? I think some people get them confused because of the name. I'd love to know if they are similar products.

Will those of us with a “pre-order” on the original ceramic and graphene kit get rolled into the products?

@BlackForestWoodCo

Жыл бұрын

It’s totally up to you! If we don’t hear from you we will send what you ordered originally but if you want the new products just send an email to dylan@blackforestwood.com and I’ll get you switched over.

Thanks so much for this video! Just wanted to ask though - can you use BFs Ceramics with Oddies Oil? Everyone seems to do videos with those after applying Rubio or Osmo but what about Oddies? Really appreciate your advice - trying to figure out if you can make a food safe finish more durable

@BlackForestWoodCo

4 ай бұрын

You can but we don't recommend Odie's Oil in general, we used to finish everything with Odies and it all completely dries up and no longer protects the surface within a year of applying it. We even had to go back and re-sand and refinish furniture for our clients.

@andrewadar

4 ай бұрын

@@BlackForestWoodCo thanks all. Was looking for what to finish items that need to be food safe PLUS durability. Sounds like it's mutually exclusive then? Charcuterie boards, even counter tops etc. finishing and durability. Is there a combo that can do that?

If the ceramic topcoat scratches would re-applying the topcoat fill in those scratches?

@BlackForestWoodCo

5 ай бұрын

Depends how deep the scratches are, if they're pretty shallow then yes it will fill them in. If they're deep scratches you'll have to resand and redo the process

Hi are there any distributors in Europe? Thanks.

Wouldn't this being water based cause it to react poorly with oil based finishes as opposed to water based finishes?

@BlackForestWoodCo

Жыл бұрын

Not if the finishes are cured! Which is already a requirement of the ceramic finishes. The biggest benefit is there is no longer any solvents that will damage the oil finish!

@crazydoctor46

Жыл бұрын

Do you ship your product to Portugal ?

ok, to see if I understood your application correctly. I start with a 120, 240, 320 grit sanding to remove imperfections, we clean the dust and put the oil with the pad, I let it pass 20 or 15 minutes and I pass the clean pad again to leave it ready, and let it rest overnight. tomorrow I apply a4000 grain sandpaper and now I start with the application of Gold, later platinum and finally Diamond coat (can I do these layers one after the other? I mean I dont need to leave time between the gold layer, the platinum layer and diamont layer? and after this I let 2 hours pass and another Gold layer is applied?) when did you apply the top layer?, Thanks so much; greetings

@BlackForestWoodCo

Жыл бұрын

Hi Eva! Everything is mostly correct. Just a couple changes! Make sure you wait at least 7 days after oil allocation before starting with the ceramic coating. I used the 4000 grit sand paper in between coats of oil. Time between first coat of oil to second coat of oil is one day. Time between second coat of oil to first coat of ceramic is at least 7 days.

@BlackForestWoodCo

Жыл бұрын

When it comes to Gold, Platinum, and Diamond. You only need one of the three. They are varrying grades if the same product. Gold = 1 year protection Platinum = 2 year Diamond = 5 year You can use any of these options depending on budget and each of them is designed to be combined with the top coat. The time between coats for ceramics is as little as 1 hour!

I do not really understand the product. Do you coat the surface after oiling?

, can you add a second top coat once the first has cured after 24 hours, Thank you

What do we use for maintenance/cleaning of table top. Customer is asking?

@BlackForestWoodCo

5 ай бұрын

Sorry, just seeing this now, we have a soap for gentle cleaning blackforestwood.com/collections/black-forest-finishes/products/black-forest-black-soap-250ml

Dylan......Ive got a couple hundred dollars of the old formula, do I need to replace it with this new stuff?

@BlackForestWoodCo

Жыл бұрын

I would use it! We also still have plenty of it that we’re using in our manufacturing. Even though the previous formula is solvent based it has much less than typical coating to be best suited (as possible) for oil finishes. To get any negative effect from the solvents in our old coating you’d probably have to do 15-20 coats on a single table. It’s typically the automotive coatings that have much more solvents as then are not meant for porous surfaces or oil based finishes.

@waynep7176

Жыл бұрын

@@BlackForestWoodCo ok thanks. Ill use it up.

Can I apply it on an oil based polyurethane finished dinner table?

@BlackForestWoodCo

Жыл бұрын

Yes you can!

you have opened my eyes to different options for some highly visual timber (Australian red cedar) in my bus, do you have an email so I can talk more in depth about what I'm trying to achieve

Hi Charlie, now get back to work🐾🤗🐾

@BlackForestWoodCo

Жыл бұрын

Haha hi Josie 🐶

Does it mean that your ceramic is weak? I have seen a ceramic solution that provides such good protection that a coin cannot scratch the surface of the wood.

I've heard of ceramic coating for hardwood floors. Is this the same thing?

@BlackForestWoodCo

Ай бұрын

This one is specifically formulated for use on tables and / or resin. But same idea yes!

@edw927

Ай бұрын

​@@BlackForestWoodCo where would I find the type and the amount to go over hardwood floors.

Hey Dylan, Quick question for you, completely unrelated to the ceramic! Is that new ink on your arm?

@BlackForestWoodCo

Жыл бұрын

Yes it is!! Good eye

@derekbambrough1376

Жыл бұрын

@@BlackForestWoodCo thought it looked new! How many have you got now?

@BlackForestWoodCo

Жыл бұрын

@@derekbambrough1376 5 haha

@scottwilson891

Жыл бұрын

I was looking for this question . I knew that wasn't there before. I wanna see them all Dylan. Lol

would this work on top of osmo oil?

@BlackForestWoodCo

Жыл бұрын

Yes it does!

What about the finger from early in the video? I echo someone else about the ink. Also, not related to this video, would like to see a quick explosion or description of the drill mixing attachment you use for mixing epoxy. Do not think you have done that.

@rndllmlt4606

Жыл бұрын

That should have been explanation. I think auto correct got me.

@BlackForestWoodCo

Жыл бұрын

I broke my finger a month ago while hiking and just got the cast off! The ink is new!! It’s so funny you bring that up, we were just talking about doing a full video on our resin mixing and prep!

So the main difference of the 3 is in the longevity of the coatings? Why not use the longest lasting all the time?..... is it just a price point issue or am I missing something?

@BlackForestWoodCo

Жыл бұрын

Yeah it's just the price, the Gold and Platinum are cheaper in the short-term

So I am a first time user of your products. I am finishing a live edge Suar table. I have ordered your products as they came out. I would like a fairly glossy but durable finish. So I now have both your ceramic coatings on hand. Base and top coat and I understand the hardness factors for them. Then I got some of your graphene coating as a top coat. So now you have the new Gold-Platinum-Diamond lines. What sequence of coats do I need to use? Do I need a bottle of the diamond coat as a finish coat and what layers do i put under it? Also how many coats of each if you recommend more than 1 coat?

I’m getting confused. Graphene, even in very small % (0.5-1% formulation) is black. Your graphene based is milky white… either you have extremely low % of graphene or non at all. Is there something I’m missing here?

Are these coatings only good for liquid based damage control or can they handle abrasion type scenarios as well ... like plates/pots/cutlery etc being slid across the surface? If they can reduce abrasive type damage then a demo of before and after coating would be fantastic.

@BlackForestWoodCo

Жыл бұрын

They absolutely help with abrasions too! We did a video a while back on IG showing how the scratches literally stop as soon as you go from non coated to a coated surface. We’ll show it here soon on youtube too!

@barry.w.christie

Жыл бұрын

@@BlackForestWoodCo Thanks for taking the time to reply ... will keep a look out for that video :)

"have a customer slide a charcuterie board".....that seems oddly specific. lol

@BlackForestWoodCo

Жыл бұрын

Hahah may or may not have happened already

When and where can I buy it from Sweden?

@BlackForestWoodCo

Жыл бұрын

It will be available in our new international website in about 3 weeks!

@BlackForestWoodCo

Жыл бұрын

It will be available in our new international website in about 3 weeks!

So you sell a bottle of this with each table and explain to customer how to apply

@BlackForestWoodCo

Жыл бұрын

Yes we do!

Food safe?

@BlackForestWoodCo

Жыл бұрын

It’s 100% non-toxic but hasn’t officially been send for food safe certification. Our product meets all the requirements for “food safe” but it is very expensive to get the certification so we have not done it yet. Hopefully soon!

I don't know if it was a verbal mistake or a physical mistake (said it wrong vs did it wrong), but it seems you put one coat each of diamond and platinum on your last two panels, FYI.

I watched this hoping to be able to possibly afford the diamond or find justification for even platinum but at $600 there’s just no way that can be affordable.

What is the point of the gold and platinum, if diamond is a five year why put yourself in a position to recoat every year or 2. I will just buy the diamond unless I am missing something, please let me know if I am Thanks and great vid

@BlackForestWoodCo

Жыл бұрын

Just the price difference, the other two are cheaper options in the short-term

Hi, i have purchased your ceramic coating, i have just put oil on a river table that i have finished, can you advice me please - how long will i need to wait once i have applied the oil before i can apply your ceramic coating, in my case it is odies oil, normally the table can be used after 24 hours, is it ok to use the ceramic coating then.

@caithnessrivertables1614

Жыл бұрын

Bought your product but you cant reply to a comment

@BlackForestWoodCo

Жыл бұрын

Hi there, We get hundreds of comments a day and do our best to get to as many as we can, sorry we missed yours. It’s best to let the previous finish fully cure before applying ceramic. In the case of Odie’s oil, this would be about 2 weeks!

I Want work on your site

Wow. $600 for a 100ml bottle. That’s about 1/4 a can of soda. I gotta think you guys are using the graphene prices from a few years ago. A couple of years ago, Rice University developed a way to make turbostratic graphene for something like $100 per ton compared to the $100k per ton before that.

@BlackForestWoodCo

Жыл бұрын

Current costs are about $100 per gram of graphene. What you’re speaking of is a scientific theory that unfortunately hasn’t been proven in actually manufacturing yet. Hopefully we get there!

@buffalojones341

Жыл бұрын

@@BlackForestWoodCo you might want to check Universal Matter. kzread.info/dash/bejne/oIyuqbVxhaaoo9o.html he gets into pricing a little after 2 min. Not theory. They have been at it and are doubling production a couple times a year, iirc.

@nataliewilliams7209

Жыл бұрын

T

@nataliewilliams7209

Жыл бұрын

Kinda

@FrozenDmon

Жыл бұрын

When the pieces of furniture you are selling are 10k and up it doesn't matter that much.

I like the burls in that table! Beauty

Can't believe I got the first comment lmao

@BlackForestWoodCo

Жыл бұрын

Congrats!

Dylan is ripped

@scottwilson891

Жыл бұрын

Right???

And your mark up is....?

Hey, maybe take a few minutes and answer some of the questions below.

Dang....could have gotten 10% off. 😅

Charlie's a butt-head. He owes me $5.

@BlackForestWoodCo

Жыл бұрын

He's also cheap, so I don't know if he'll pay you back. He owes me $20 :(

Graphene is very toxic

You guy are not chemist. Is this just a rebranded version of some other company?

@BlackForestWoodCo

10 ай бұрын

That's definitely true haha we're not, we hired chemists to create a resin for us to meet our standards

Avoid this shit like the plague unless you like destroying your nice finish and throwing hundreds of dollars in the trash. This is not a “water based ceramic” it has solvents which are not consistent between bottles. If you understand the chemistry of “ceramics” at all you will know sio2 is not a solvent or carrier. The application of this is nothing like any other ceramic coating. It’s more like the cheap spray bottle ceramic snake oil you get that doesn’t even last 6 months. If you like streaks, haze and blotchy finish this is the product for you.

@BlackForestWoodCo

Жыл бұрын

It is absolutely water based, no solvents at all. If it was solvent based our shipments would have to be classified as hazardous goods, which anyone who has ordered our product knows they are not. Our old formula was solvent based. Not sure if you misinterpreted something from the video but we are well aware SiO2 is not a solvent, it is the protectant. Also not sure what ceramics you have used but there application is consistent with other products, even in the automotive space. We have no history of you ever making an order so I’m doubtful you’ve even tried the product, however if you have and you’re getting uneven results, we’d be more than happy to teach you how to use ceramic coatings!

Not answering the questions below is a very poor show of customer support. I have just minutes ago finished putting the top coat on my walnut dining table and couldnt be less pleased. Its streaky, blotchy and looks like crap. You have to worknat light speed to work with this product before it dries. The comment during the video that states you dont have to worry about lapping is simply not true. This product is a nice idea but is poor performer i wont be using it again.

you realize this channel hasn't taken off because 98 percent of it is your father forcing you or someone to be plugging products instead of actually showing processes and cool shit you guys are making. Also doesn't help he's been raging in general about youtube subscriber counts in several videos.

@BlackForestWoodCo

Жыл бұрын

No one is forcing me to plug this haha. I’m passionate about these products and want to share them with our audience

@fredproctor6973

Жыл бұрын

I think the channel is great, they've come a long way and made their products better every chance they could. There's nothing wrong with that.