Enjoy your videos gunman... I use this gun daily on all my paint jobs. I paint the metro buses in Seattle. I like it way better than my tekna pro lite. It is one the easiest to use and clean. Keep up the good work brother.

Thanks for the great videos. Very helpful to this novice. Gotta get out to the shop and paint some stuff.

Thanks for the video Gun Man!

I ALWAYS ENJOY YOUR VIDEO,S ; I,M BUILDING UP MY KNOWLEDGE BASE; THANKS MATE!!!

Nice and slick! I want to try the LPH 400 with the orange base coat cap and see how that performs

nice fan and finish from that gun

I love tha guns iwata is the best ...

I have my lph400 set up like so.29psi trigger pulled.fan is 2 turns in from fully openfluid control is 2.5 turns from fully closed. That works great for a medium solids clear, but for a good high solids it sucks. Any tips on changing things around to help with a thicker high solids.

Does LPH400 have any overspray advantage over the Bellaria when used ( at 25 - 29 psi )way above the recommended 16 psi?

what pressure should i set the regulator at the compressor, 90psi?

hi bud,thats a lovely finish,good luck

@TheGunmanChannel

9 жыл бұрын

Thanks :-)

Never mind I just heard you saying 29 psi after watching this whole video, thanks again

@TheGunmanChannel

9 жыл бұрын

Thanks for watching man :-)

where can i buy this gun do i get it with 1.3 tip or 1.4 is it hvlp gun

Hey there. Hope you see this. If I already own a Tekna prolite. With 10/20. 1.3 and 1.4. And would like a second gun. What would you recommend I get. W400. , lph400 Ora Sata 5000rp.

very big fan

Nice

Love your vids Gunman! Im hooked. You went over all the gun settings and set them to match the factory orange peel. My question is if you wanted it really slick what would you have changed in settings? Thanks for all your time that you dedicate to your videos.

@TheGunmanChannel

9 жыл бұрын

Dwayne ST.CLAIR theres so many variables to try to explain, I will work on a video on peel control, things from gun distance closer to viscosity nice and thin, and pressure higher.

@MrProxl

9 жыл бұрын

That would be awesome. I know just a few small changes could make a big difference. I look forward to the video and the affects of certain changes on a panel as Im sure a ton of painters are as well. If you have time in the video explain quickly if you can the changes in your pressure settings on a hot day vs a cold day. We love you videos here in the US! Thanks again.

29 psi? I thought these guns are supposed to run on low pressure like 19 PSI tops?

Really nice, good video as always! What size is the tip on these gun 1.3 or 1.4?

@TheGunmanChannel

9 жыл бұрын

Thanks man, its a 1.3mm

really nice finish with that gun mate , how do you compare it with the ws400?

@TheGunmanChannel

9 жыл бұрын

I like the LHP400 better than the ws400 but both are good guns, The fan is much nicer on the lph400 and I just find clear goes on nicer.

Hey I just got me an LPH 400 with the orange air cap, how many psi do you use when you spray clear?, Thanks, love your videos

@TheGunmanChannel

9 жыл бұрын

Some people say they go as low as 18 psi but I wouldn't run it any lower than 25psi I found it goes on very orange peely with pressure too low.

I saw a guitar maker mentioned this for when they finish their guitars... interesting

Hi Gunman! Nice video (as always) :) One question. I`ve bought this gun from my boss. The tip on it is a WB1 with a 1.2 nozzle. Will it be ok for base or clearocat? :) Keep those videos coming (Y)

@TheKing-nu4fk

Жыл бұрын

Nah that tips good for spraying in truck bed liners. 😂

@sirhaugen1025

Жыл бұрын

@@TheKing-nu4fk 5years later😂 bur thanks😂

nice mate how can I adjust with very little orange peel

Why so high of pressure?

Awesome vids. Would you consider your passes light or medium wet?

@TheGunmanChannel

9 жыл бұрын

depends what finish I'm going for

@rogercaneda5110

9 жыл бұрын

Like in your demo of this video. Just learning as I go here and some of the clear spec sheets I read so 2 medium wet coats.

@TheGunmanChannel

9 жыл бұрын

I'd say 1 med wet first and 1 wet for the second

Have you ever had this gun shoot heavy on the ends of the fan pattern? I did a silver paint job a while back, and the fan was so uneven it left me with stripes. I tried choking it in to save the job, but failed and ended up redoing the whole thing with a different gun. Settings were: 25psi at the gun regulator, 3 turns out material, full open fan. silver cap.

@mruvalcaba2005

7 жыл бұрын

Hey cody you might want to try this ... turn the nozzle so the pattern sprays horizontal, put a big piece of masking paper on the wall as a test panel, turn the pressure to about 23lbs on the regulator , then spray in one spot at the proper distance as if your painting for real, then watch the way it runs down , keep adjusting the pressure up or down till the runs are eventually dripping down he paper . After that you should have an even spray . Oh have the fan all the way open . Hope it helps

@JoBar12006

6 жыл бұрын

Cody F Wide open fan. Load your gun, spray looking at the fan, adjust air pressure as air pressure can affect the way your fan sprays. Too high on most guns can cause tiger striping (outsides of the fan to shoot more material leaving stripes). Too low, you get a heavier muddle spray and will probably mottle (heavy grouping of the metallics in the muddle, light on the outside) the metallics in a metallic paint code.

Hi, first to tell you, you have really great videos... I learned a lot from them. I have one question, which gun would you recommend for base paint and clear. I have one low budget gun with 1.7 for primer, but I want a good gun(one gun) for base color and clear.. which one would you recommend and which nozzle for paint which for clear?? Thank you very much. Grettings from Croatia

@TheGunmanChannel

9 жыл бұрын

Look no further than the DeVilbiss Gti Pro lite 1.3mm and the TE20 aircap, top quality gun and not too expensive and will last a lifetime. Otherwise go for the Anest Iwata Bellaria Review & Demo, good luck.

@sinisasoric5800

9 жыл бұрын

thank you!

@sinisasoric5800

9 жыл бұрын

The Gunman One more question. Is TE 10 (1.3) better for base/clear or TE20? Is there much a difference? In your video i saw that you use T20 for clear... And you said you also have TE 10. Did you try it? Your opinion?? Thank you!

@TheGunmanChannel

9 жыл бұрын

The te10 features in this vid but I prefer the te 20

Hey Gunny, Whats your opinion on the Supernova as for as finishes go. I know you said it was harder to setup than the lph400 which i own but i want a different clear gun. I have the sagola 4600 extreme and its awesome but i kind of wanted a different gun and different brand for clear vs. having to sagolas.

@TheGunmanChannel

6 жыл бұрын

I haven't used a supernova for a long time but I do remember it was a great gun, if you haven't already got a GTI Pro lite it could be a good option.

@lowebody

6 жыл бұрын

Thanks Gunny. I did look at the GTI Pro from spray guns direct and definately an affordable option.

@TheGunmanChannel

6 жыл бұрын

If you do get one I'd recommend getting the TE20 air cap. I've got a few comparison videos you may get something out of before buying.

@lowebody

6 жыл бұрын

greatly appreciated.

nice how would I adjust with no orange peel

@BretBunton

5 жыл бұрын

1000 grit, 2000, 3000 then buff lol

hey gunman, I own a devilbiss gti pro and my boss at work owns a iwata w400(the English version of this gun) , he won't let me use my devilbiss at work and makes me use the iwata instead because he says it uses less paint than my devilbiss, what are your thoughts on this? I find the devilbiss easier to use myself to be honest.

29psi/2 bars with the trigger full press or before that...

@TheGunmanChannel

9 жыл бұрын

Mando S Fluid set 2-3 turns out

I totally agree on your observation; in contrast to the supernova, the LPH 400 has a much easier setting and argonomicaly fits much more comfortable in ones hand, is lighter and sprays, comparably equal!!! I prefer using: W400, LPH than the newer super nova!!! Just my thoughts.

@TheGunmanChannel

9 жыл бұрын

Yeah Supernova looks better but LPH400 is a better gun.

yeah I sprayed base coat and clear on a GTI fender, the paint was really granny and the clear coat came out with some orange peel, would you recommend to use the same pressure with base coat? thanks man.

@TheGunmanChannel

9 жыл бұрын

I find that you can use less paint with less pressure so using base I'd run it from 20-25 (closer to 25) because its a different product to clear and not the finished product it wont go on as peely as the clear so I like to up the pressure on clear as to not compromise the quality of the finished product.

hi Gunman.. i know this video is little bit old but i want to know if the LPH400 is a better gun than the W400 bellaria and if the difference in price really worth to have the LPH400 over the w400 bellaria? both are to be used heavily ... thank you

@solventbased3153

3 жыл бұрын

Lph 400 is better

What's up man I'm from the US and I just got this gun but they say to spray it at 16 psi and it sprays really good I've tried spraying it at 25-28 psi and it ends up really dry I use it for base and clear

@andrewfredrick7017

5 жыл бұрын

i bough the lph 400lv here in the U.S. I am waiting to use when I get to base and clear. I think the difference is in the supplied air cap. Mine , as yours says 16psi at full trigger pull. I'm using 3/8" hose with 3/8" connectors and a regulator at the wall, no flow valve on the gun. How did you make out spraying at 16psi?

hi why did you come in 2 turns on fan ? and thanks for video

@TheGunmanChannel

9 жыл бұрын

I just found the fan sprays more even when in 2 turns, I don't do that on all guns but found the LPH400 works better like this. A few other guys that I know use this gun like to set it up this way too. Do you have this gun? if so how do you set it up?

@xjs2

9 жыл бұрын

hi yes i have this gun i set fan all way out and then in half a turn in and set psi to 24psi and 2.5 to 3 turns out on fluid for clear it still works well even at 20psi for clear i dont use it for base i have w400wbx for base thanks

What you mean by 2 bar ? Can anyone explain?

@brooks.5849

5 жыл бұрын

Approx. 29 psi :)

Is that solvent based?

@TheGunmanChannel

9 жыл бұрын

Yes.

Is your fan wide open?

On what kind of fuel does your booth run?

@TheGunmanChannel

9 жыл бұрын

Gas from the gas main

Tried to apply clear but I got a bunch of orange peel

I hate to say it but, that gun out sprays your devilbiss pro lite. Minimal overspray. Your bossman needs to buy you one with all the money you will save in Clear.

@TheGunmanChannel

9 жыл бұрын

Michael Josemans I'm my own boss :-)

@mescalp

9 жыл бұрын

The Gunman Did you get your own shop?

@TheGunmanChannel

9 жыл бұрын

Yep, I've been here since December last year.

Just sub to your channel great content. I'm a 64 year old how enjoy restoring vw spilt-window buses as a hobby. My day job i'm a mfg. Eng. for lennox industries home HVAC company. We do own a company in your area Kribby part of Heatcraft. Ok I have a IWATA LPH-400 plan on using it just for a clear coat gun. I would like another good gun for base coat and sin gle stage paint. your thoughts. I have a NAPA air compresser 80 gallon tank and I have filter dryer system. Just wet the floor down in my garage cross my figers I do not get a lot og bugsd in the paint. As a general rule I paint car parts hood or door, or fenders. with that I can get good results . Again it is a hobby do not flip or sell the cars --they get names and become a member of the family that just happens to sleep in the garage.. thanks for sharing your skill set and helping me enjoy my hobby even more.

sorry I meant the w400

@TheGunmanChannel

9 жыл бұрын

Both great guns but I like the W400 Classic Plus Bellaria better

1.4

Orange peel is ugly