To learn how to install this manual tire changer, watch here: kzread.info/dash/bejne/ZGuAyo9sprG0n7A.html

Out of all the videos you are the only one that showed how to exactly use the goofy end of the bar I'm pretty sharp but I couldn't figure it out excellent job

@DeanoOutDoors

Жыл бұрын

Thanks! That "goofy end" works great if used correctly.

I've seen countless explanations of how to use this machine (even though I have one and know how to use it, I am still entertained by seeing others do it), but yours was the clearest, most informative and you actually used the machine correctly (many do not). Excellent video!

@DeanoOutDoors

4 ай бұрын

Thank you, I appreciate your comment.

Just bought the same manual tyre machine here in Perth western Australia.🇦🇺 This was a perfect demonstration on how to use the SCA manual tyre changer

@DeanoOutDoors

15 күн бұрын

Awesome! It’s a great handy tool. I’ve recently added an adaptor to this changer that makes life even easier when changing tires. I have a vid on it if you’re interested. Thanks!

One of the better demos Next level is adding plastic to protect aluminium rims

I did a few modifications: welded the base together, bent the bead-breaker arms, so welded an extra bar to one side, and had to grind an buff the bar end for removing the tire, as the sharp edge was damaging the tire. I think I also did some grinding and buffing on the goofy end. I also just ordered a cone for doing aluminum rims, as that hold-down is brutal on rims.

@DeanoOutDoors

7 ай бұрын

Great mods! I’ve been doing a couple as well to add a little more strength and ease of use.

Great video! Very clear instructions. We used to have a manual changer at my Pop’s old gas station. You use the pry bar to install the tire the same way you use it to remove the tire, the knobby end of the bar will guide the tire onto the rim, when you rotate the bar around the center post. It easier and gentler than prying the tire on. Good job!

@DeanoOutDoors

7 ай бұрын

Thank you, I appreciate your comment.

Ramset make a recessed screw thread anchor. Install that in your concrete floor. Bolt the tyre changer in place when using, remove and store when not in use.

I inherited one, I love it! Tip: Use a wire wheel to remove the red paint from the end of the bar and the hold down star, makes for a smooth and red marked free job!

@DeanoOutDoors

7 ай бұрын

Awesome! Thanks for the tip.

Freaking nice job, buddy. You made it look easy with one bar while other videos you got guys struggling with 2 or 3 bars. I'm sure it also depends on the size of the tire and rim but still, you made it look really simple.

@DeanoOutDoors

Жыл бұрын

Thanks! I found it even easier to Mount new tires versus old ones. The older the tire the stiffer it gets. I am now using BeadBuster Tire mounting lubricant for removing and installing tires. This made the job a lot easier.

best way to not scratch or damage the rim edge is simply to turn the rim upside down with the face pointing downwards. Just cut a hole in a rubber mat and place it on the top surface of the harbor freight tire changer. When working on the backside it doesn't matter if you get some minor scratches

@DeanoOutDoors

Жыл бұрын

Great advice, thanks for sharing.

@Saberkitten007

11 ай бұрын

As a tire changer/Manager at a tire shop, not all rims can mount tires on the back side due to "that crevice also known as the drop center" That was described in this video is a valley where the bead sits for mounting and dismounting. Steel wheels and alloy can only mount/dismount from the top/face. Custom/deep dish wheels mostly mount/dismount from the back side due to the drop center closer to the back of the rim. A good indicator of this is where the valve stem is location and looking at the back of the rim to see either a small indent or flat. Will tell you that the rim will be either front mount/dismount or reverse mount/dismount.

Excelent video! You are great at showing how to properly doing it! Thank you very much

I also got the same H.F. changer .. Price was $ 29.99 + tax + $ 16.65 for cement anchors and tool, another $39.72 for a hammer drill .. Total $ 88.56 ( so far ) .. I have added a length of electrical conduct over the top post to act as a bearing to turn as you move around the tire ....

Thanks. It's been forever since I had used this bead breaker, and I couldn't remember how to use it! Worked great.👍

@DeanoOutDoors

Жыл бұрын

Your welcome! Great to hear.

Thank you @deanooutdoors have one of these but only use it to break beads when refurbishing wheels. Am going to try this!!

@DeanoOutDoors

7 ай бұрын

Great to hear! It’s awesome for breaking the beads as well.

Wow first time doing that you’re a natural!!

Taking the tire off with one ain't that bad but putting a low profile back on the rim is ridiculous with one of these. After hitting my hand multiple times from bar slipping I got the tire off. I could only get new tire halfway back on rim and said forget it. Even if ya got that thing bolted securely it still wobbles in the worst way. My hats off to ya guys that have the experience to use one efficiently.

@DeanoOutDoors

7 ай бұрын

Low profile tires are difficult to mount in general. Try using this next time and it will make a world of difference. Tire Mounting Lube: amzn.to/3XgUoCE

Thank you for showing this. I am building a garage for 1/25th scale model cars and I was looking for a simple tire changer for antique autos and I think that modeling this from styrene plastic tubes would be quite easy.

@DeanoOutDoors

7 ай бұрын

Your welcome! How cool, I can’t wait to see your video on how it turned out.

@MonsterHobbiesModelCarGarage

7 ай бұрын

@@DeanoOutDoors Might be a little while. I'm detoxing from Halloween!

Nice video wish I'd saw it before doing my first set, which were 17". A suggestion when removing tires keep the red bar at a steeper angle, it causes the tip to lift the tire, lower angle close to the rim makes it chisel into the bead, which can RIP the bead. Great mounting I had to start exactly like you did but had to use the pry endand a screwdriver to stretch it to the pop on. I had help too as I'm not very large but they were 265/70R 17.

@DeanoOutDoors

Жыл бұрын

Thank you. Good info to know. I now use a good amount of tire lube when using this tire changer. It makes a huge difference, so much easier. For the price, this tire changer is awesome.

Great video,thanks for sharing.

Thank,,, it is a good demonstration of using tools..

Very informative, thank You From Australia

@DeanoOutDoors

2 ай бұрын

Your welcome!!

Well done, looks like allot of fun

@DeanoOutDoors

11 ай бұрын

Thanks, this tool makes changing tires so much easier. It’s even better now that I bought some good tire mounting lube.

Thanks for the video.

Good Job well described useful thanks

Thanks!

Thanks Deano!!!!!

@DeanoOutDoors

Ай бұрын

Your welcome!!

Bravo thank u

I didn't know they had Harbour Freight in Canada EEH !

You made that look easy Sir.....would you know if this will work with motorcycle tyres?

@DeanoOutDoors

6 ай бұрын

It’s not too bad. Did you happen to see my newest video using an attachment? It makes removing tires so simple. As far as motorcycle tires, i think you’d need an adapter. This model is not designed for them.

Nice job and thanks for posting. I been watching a ton of these videos as I wait for the weather to warm up so I can install and use the one I just purchased. I already anticipate bending the bead breaker tube and the bar. It seems like a decent tire changer that has the basics you can then modify to make it more HD like many on KZread have done.

@DeanoOutDoors

Жыл бұрын

Thank you. Yeah, it is a great tool. It’s surprisingly tough as is but it sure wouldn’t hurt to beef it up a little. Get yourself some good tire mount lubricant, it’ll make the job so much easier.

@Alpha-ms9nj

Жыл бұрын

@@DeanoOutDoors - Yep for sure. I changed many tires shops I worked at back in the day and always lubed up the the beads. I'm swapping tires onto 4 new rims on my Jeep and can't wait to put it to use first time.

Nice Job sir

@DeanoOutDoors

11 ай бұрын

Thank you!

Do you have agents in East Africa

So now I'm going to try it on my six-ply Goodyear off-road tires and see how it works I'm going to take a big heat blower and warm them up first I got one on my hand but it was a terrible battle

@DeanoOutDoors

Жыл бұрын

I have since bought BeadBuster Tire mounting lubricant, this will help you out tremendously in removing and installing your tires.

What size is the bolt that you mount to the floor, there are 2 parts, 1 is the bolt and the things you drill to the floor and inserted what do you call that, thanks

@DeanoOutDoors

Жыл бұрын

That is 3/8" x 1-5/8" Steel Drop-In Anchor

@mohdnooradnin

Жыл бұрын

@@DeanoOutDoors Thank you. You safe me from guessing.😀

Is this bolted to the floor? Thanks

@DeanoOutDoors

Ай бұрын

Yes, I used 3/8” drop in anchors. Link to the ones used are in the description.

Thanks for sharing. At today's pricing at tire shops you could easily recoup your investment on one or two tire swaps. I got a quote for $30.00 per tire to swap some tires that I bought online today. The cost of everything is getting out of control.

my goodness... watch in 2023... it still helps...

@DeanoOutDoors

Жыл бұрын

Glad the video helped!

I guess if you only have a junk tire it's ok to practice on it, I made my own tire changer on T wagner KZread and it's a similar design to yours. I mounted 2 tires, new ones, so far and did it slightly different to your method using only the pointed end of the bar

@DeanoOutDoors

3 жыл бұрын

Nice! I have recently bought a new mounting bar that makes this project a whole lot easier. I'll be uploading a video soon!

@twagner6155

3 жыл бұрын

@@DeanoOutDoors I really needed to see your video since I was making my tire changer from scratch. I have since made a bead seating tank, works good.

It is extremely difficult for me to keep the bead in place when mounting the tire.

@DeanoOutDoors

7 ай бұрын

Make sure to keep the bead in the recessed channel and the tire will mount much easier. ; )

does it scratch the outer rim paint?

@DeanoOutDoors

2 жыл бұрын

If you have painted rims, I would suggest purchasing the No-Mar tire changing bar. This setup works great on steel and aluminum rims, but the demount bar could scratch painted surfaces.

@krishnasonkamble4172

2 жыл бұрын

सुपर

I would think for occasional use it would be fine. Probably not great for frequent use.

@DeanoOutDoors

4 ай бұрын

I added this attachment kzread.info/dash/bejne/lWudkrCQipzKdM4.htmlfeature=shared. Really makes install and removal very simple. The attachment is a little pricey but worth it to me.

Did it bend after hard use? Still better than crowbars and screwdrivers!

@DeanoOutDoors

2 жыл бұрын

I haven't bent the bar yet. Be sure to use plenty of tire mounting lube and it works great!

r u from like minnesota wisconsin or canada or something?

@DeanoOutDoors

Жыл бұрын

Oh ya der eh, I’m a Wisconsinite. If you’re ever in da area, stop in for a beer or chree.

@DaBossk

Жыл бұрын

@@DeanoOutDoors lol. your accent is quite strong bro

@DaBossk

Жыл бұрын

@@DeanoOutDoors good luck during the snowstorm bro. it's gonna be awesome

Shops are now refusing to work with tires older than 7 years. 😢

Your the first one I seen use that curved end to put tire on, that always slips off when I try it, guess your smarter than the bar.........

@DeanoOutDoors

2 жыл бұрын

Haha, thanks. I found it works really well after a little practice. For the price of these manual changers, you can't go wrong. They sure are handy.

its good for emergency but Bad for good rims it will scratched the hell out em

@DeanoOutDoors

Күн бұрын

Agreed, that’s why I’ve since added the attachment with a duck bill. Great feature, no worry about running a rim.

Where are you at, around here they are 59.99

@DeanoOutDoors

5 ай бұрын

Yeah, I see the price has doubled since purchasing mine. Still not a bad deal for the convenience of being able to change your own tires wherever you want.

Tdk bgs stik nya. Sya sudah beli alat ini

Thanks much!! i just bought one Thursday. Biden inflation! Paid over $64 with tax, on sale! I dont have a garage to bolt it down though. Will try heavy double plywood base. I really appreciate your work here on video!

@Redisdead98

4 ай бұрын

Going to have to screw your plywood down too

Mais moi je suis au Togo

@DeanoOutDoors

7 ай бұрын

Do you have access to Amazon?

Pardon j'ai envie d'acheter

@DeanoOutDoors

9 ай бұрын

Can you order from Amazon? They do carry these.

$31 3 years ago? I paid $99 Cdn.

you mounted it too close to the wall

Pro Tip - Soak the beads w/ WD-40 prior to breaking. Thank me later.

Don't any of these noobs wear work boots? So far I've seen house slippers, sneakers & Merrils??

😂😂😂 tu prends les gens pour des cons. Les pneus sont déjà décollés😅😅😅😅

Good video but will it ruin the finish on a nice rim? That’s my worry.

@DeanoOutDoors

Күн бұрын

Yep, need to get the attachment with the duck bill. Works amazing. I have a newer video out demonstrating it if your interested.

I didn't know they had Harbour Freight in Canada EEH !

@DeanoOutDoors

6 ай бұрын

😂 Oh yea der eh!