Big thank you. I followed the extremely brief instructions that came with the sliders and it came out wrong. I started from scratch with your video and was able to get it right.

Thanks for a simplified, straightforward method without all the unnecessary commentary! Great job!

@Woodworkerexpress

7 ай бұрын

Glad it was helpful!

@carmensantiago8772

7 ай бұрын

Exactly!!

Excellent method. Very easy and accurate. Thank you.

Pretty top end add-on to some pretty bottom end drawers.

Thanks for uploading, importantly your explanation is clear and very easy to follow. Keep up the good work

@Woodworkerexpress

4 ай бұрын

Thanks! Glad it helped out

Yes, this is exactly what I was looking for to do this upgrade including the measurements of the new slides, rather than going by the old slides. Great demonstration of how to install with cool tips with marking the existing drawer and how to centre the new pieces. Thanks so much for the post!!

@Woodworkerexpress

4 ай бұрын

Glad I could help

@ncmusic61

4 ай бұрын

Should the drawers be smooth opening? I find the first one a little stiff opening but closes nicely@@Woodworkerexpress

thank you, your voice is so calm and you go straight for the deal. That was a song from Rosemary Clooney in my mom’s day. I would love to turn this over to someone else but here I go.

Just what i needed! The instructions were clear and I'm confident i can get this done now

@Woodworkerexpress

11 ай бұрын

Awesome to hear!

The best step by step I’ve seen so far! 👍

@Woodworkerexpress

3 ай бұрын

Wow, thanks!

Great explaination. Simple and easy to follow.

@Woodworkerexpress

4 ай бұрын

Glad it was helpful!

I wasn't able to use much from this video but you gave enough keywords and tips to measure that I was finally able to do mine on my own.... Now I just gotta figure out how to put the cupboard back on....

Exactly what I was looking for. Many thanks

@Woodworkerexpress

5 ай бұрын

Great to hear!

@jaimedpcaus1

5 ай бұрын

@@Woodworkerexpress please do more

Thanks for the tutorial!

@Woodworkerexpress

Жыл бұрын

You are most welcome!

Thank you so much👍

thank you! you saved me a bunch of money and time what this video

@Woodworkerexpress

5 ай бұрын

Great to hear!

Dude you are the mf man! This helped me so much and taught me how to install slow close sliders! After hours of failing miserably your simple informative video saved the day! Thx a million brother! 👊👊👊

@Woodworkerexpress

4 ай бұрын

Thank you! I am glad this video helped you out and its very nice to hear

common to my house! Boy here goes!

Well done

@Woodworkerexpress

8 ай бұрын

Thanks!

My drawers are 21 5/8 , and i only see 20 or 22 inch ones. which should i get ?

My buddy built a drawer like this for his man toys. My wife thinks he is a bit kinky, but I love him just the same.

@Woodworkerexpress

3 ай бұрын

😂 #mantoys

I’m enthusiastic to take up the challenge and replace our kitchen drawer slider. Your video has built up my enthusiasm. So, our drawer’s are 21 ¾ inches depth what slider length should we purchase? 22 inch or 24 inch? We have the required ½ inch at either side. Thanks for your detailed video.

@AM-nk7it

24 күн бұрын

Are you planning to install a slider longer than the drawer? I don't think so, right? Has to be the same size or smaller.

How do I save this video?

Kool video..question....why mark at 2 inches/50 mm please???? Thanks....les

@Woodworkerexpress

Жыл бұрын

Thanks! I was looking for a universal measurement that would work for most slides. You can go less of course, as long as the slide clears any obstructions.

@lesowen4864

Жыл бұрын

@@Woodworkerexpress thank you

@k_sara13

Жыл бұрын

that what is the same question I had. now it's all clear. Thank you!

Question for you ! Haha hope you don’t mind me asking ! Anyhow can this slide be used for something other than a drawer ,, Meaning I have a Breville toaster oven like and it sits on the counter top tho it sits to deep and when on the heat and yes smoke at time raise up and grease stains my upper cabinet doors … I was wondering if I sat the Breville on these rollers hinge’s that if ever I wanted to run the Breville I could just slide the Breville forward even 2 or 3 inches and it seems to make a difference when I pull it out manually ! The second question is i don’t won’t holes on my counter to wreck anything , so I wonder if it’s just sitting on these roller hinges if it would slide out just by the weight of it ? Like to hear your comment or another suggestion 😩🤣👍

@Woodworkerexpress

7 ай бұрын

Well! You definitely do not want to install the slides to the countertop. I would recommend making a platform to mount the slides to and and then add a shelf to it (as the drawer) and then sit the Breville on it. Does that make sense?

Can always install a close soft piece and save some money

I want to know...what the heck is that big black box on top of the fridge?

She do you call the old slides Epoxy ?

@Woodworkerexpress

Жыл бұрын

Yes?

If you were going to burn 1 inch on the tape measure, you need to do it on both side, because sometimes tape measure is 1/16 th of an inch off when you hook or push against Whatever your measuring.

@Woodworkerexpress

2 ай бұрын

Very good advice! I was assuming that your tape measure has been inspected and checked for accuracy first!

Always pre drill.

@Woodworkerexpress

4 ай бұрын

Very true! These screws are so small and were going into plywood so not too much of a risk

The roller slides look better than the cabinets

"It's quick and easy" this is not quick or easy

@matthewotis3594

Ай бұрын

Nothing is quick or easy. Come on now.

I bought the 22 inch drawer slides...will they work with a 21.5 inch drawer? Depth to face of cabinet is over 23 inches

@Woodworkerexpress

3 ай бұрын

Yep! They will work perfectly. You will actually have a little more extension of the drawer so its a bonus