The kittens were having fun while you were working.
@iyaayas2002 жыл бұрын
love the cats photobombing in the background LOL
@normanhopfensperger43433 жыл бұрын
How to unstick a stuck engine, over 6 months ago, started to get my sbc.. unstuck, I have learned a lot from your two man team! Thanks again Norm 😎
@deanjohnson22494 жыл бұрын
Need more videos. You guys got a great show really descriptive and that's what I like about this channel. But we need more videos.
@resurrectionauto5714
4 жыл бұрын
Thanks! And yes we know y’all need some more videos, we are working on doing better with getting more content. We’ve been pretty busy with customer stuff and that has taken us away from time to video, I’ve got a few more coming soon though!
@roadjokers64672 жыл бұрын
I’m very impatient 🤣🤣 same here bro 💪🏼 great vid
@HartRockGarage4 жыл бұрын
Hey guys. Just wanted to say I’m enjoying your channel and am glad to see it growing. I’ve started mine as well. I hope to do half as well as you guys. Keep it up!!
@victoryrider2 жыл бұрын
I'm going to try this method. I bought a 56 F100 from my father in law have no idea how long it's been since it ran.
@vicwilton37544 жыл бұрын
Should take the tappet covers off first and make sure none of the valves are stuck, you don't want the piston hitting a stuck valve and bending it
@aprules23 жыл бұрын
What is the FX spray called so I can try it.
@buddygallagher1193 Жыл бұрын
Thanks for the video man
@amoobloom52172 жыл бұрын
Was gonna throw out my datsun’s engine, this video saved it!
@vetham1009 ай бұрын
Very good video, one suggestion if I may, keep the camera close to you, the mic is on it. When you move too far from the camera, your audio drops right off
@chevelle-pi1bn4 жыл бұрын
Great video , I myself also add mystery oil down the intake so the intake valves get it also etc... 👍
@resurrectionauto5714
4 жыл бұрын
I’ve used good old mystery oil a few times and it also works awesome! In the video when I try to fire it up I’ll throw some in the oil to help free stuff up!
@scionnn
Ай бұрын
@@resurrectionauto5714 nice scion
@TheArcticWonder3 жыл бұрын
Got a ford 460 that had an oil pan full of water, been sitting for 7 years... Trying to get her to turn over.
@Geemisman3 жыл бұрын
would love too see if this motor will start.. keep them coming .. great video
@sammccullough21205 ай бұрын
Love the kittens
@strattuner2 жыл бұрын
there is a product called FREE ALL, i used it on my 2.2 mopar turbo motor is sat all winter last year and got flash rust on the cylinders,i'd pulled the pan a few years ago and it was a brand new short block installed in my car by a dealership years ago,this stuff i shot it down the cylinders and it freed up this new engine, used the whole can,i was desperate,is worked the engine runs ,no smoke just like it did,try it,i swear by it,its in a blue and silver can,i bought a whole case,now when i let engines sit, fill the cylinders thru spark plug holes,and make them wet before storage,shoot is down the intake real good prior to storage no surprises anymore,give it go,the stuff is 6.00 dollars a can worth it
@freesoul93243 жыл бұрын
I have the same problem as this, I filled the cylinders with WD40 first, and after couple of days I filled them with tf. It has been like that for 4 days now, tomorrow I'm gonna try rotating the crankshaft. My engine was left about 6 years under the rain without spark plugs.. that is really tough. Thank you for sharing.
@raymondkarlsen9995
3 жыл бұрын
How did it end?
@theriderider2204
3 жыл бұрын
Damn he ignored the hell out of you. Rip
@ee546636
2 жыл бұрын
Did you get it ?
@huskyvacs
2 жыл бұрын
Diesel and a bit of oil mixture in all the cylinders and leave it sit. That will break up a lot of the rust. Keep in mind diesel will eat away rubber - which you will be replacing anyway - but keep that in mind. WD40 will not do jack shit. No idea why people keep using WD-40 for things its not intended for.
@garysuarez9614
Жыл бұрын
@@huskyvacs "Water Displacement 40" mentions nothing of penetration or derusting action.
@FayruzGuruhiАй бұрын
What her doing a cat😂❤❤❤
@celilfirat2526Ай бұрын
Thanks boys
@Flavor-il9tc3 жыл бұрын
Cool
@Yomamalony3 жыл бұрын
Where do I put the trans oil in?? Spark plug holes?
@skn9895
3 жыл бұрын
Yes. Pour it in through the spark plug holes. Also a good idea to pour some into the intake manifold and to remove the valve covers and check for stuck valves.
@goldteethman8720
2 жыл бұрын
In the hubcap
@rcnelson
4 ай бұрын
Be sure to drain the blinker fluid first.@@goldteethman8720
@frankcollinsjr5162 Жыл бұрын
I have a 2012 Buick Lacrosse. My son ran the engine out of oil. It is sized. Can it be fixed?
@resurrectionauto5714
Жыл бұрын
Negative. Need new motor there.
@chrisscholp1968Ай бұрын
Where is the next video where they try to start the engine?
@cindylawrence15153 жыл бұрын
First of all, yes, its most important to free the slugs AND protect the cylinder walls from scoring. So flooding the cylinders with a good thin lube product is the first step. But it is ALSO highly recommended to pull the valve covers and lube the valve guides and lube the rockers and lifters/ camshaft lobes. It a lot of cases though guys are planning to buy a hi pro cam and kit from the aftermarket, so....
@petsrule51983 жыл бұрын
I love the cat's 😻😻😽😽
@jonross22963 жыл бұрын
marvel works great to
@TXH11383 жыл бұрын
Did Curly have the day off?
@scionnn
Ай бұрын
Lol
@bushelfoot7 ай бұрын
All lubrication comes from. Below
@JudasValencia-eg7jo10 ай бұрын
That engine ain’t seized the fan is turning as he is pressure washing it?
@resurrectionauto5714
10 ай бұрын
That’s the water pump. Water pump can spin freely despite the motor being locked up
@johnhegarty1761
8 ай бұрын
It'probably aclutch fan bingo,
@johnhegarty17618 ай бұрын
Pour the trans. fluid down the carb. It' go to all the cylinders at once.
@hassancapkiller3 жыл бұрын
Lol thought it was a gaming video
@craigdixon41135 ай бұрын
So, the Cat’s name is Jesus?
@davechampion49877 ай бұрын
I'ts out of a car you can tell by the water neck
@philipsurette2313 жыл бұрын
try ATF and Acetone - Maybe wait for 10 to 15 minutes B4 U turn over the engine
@mikejanicke3082 жыл бұрын
Penatrin spray
@zeb54785 ай бұрын
Pin your engine stand
@Junkyardnedreck2 жыл бұрын
Yes, let’s hose down the old junkyard motor w a pressure washer……. What could it hurt at this point…..?🤣🤣🤣🤣
Пікірлер: 57
The kittens were having fun while you were working.
love the cats photobombing in the background LOL
How to unstick a stuck engine, over 6 months ago, started to get my sbc.. unstuck, I have learned a lot from your two man team! Thanks again Norm 😎
Need more videos. You guys got a great show really descriptive and that's what I like about this channel. But we need more videos.
@resurrectionauto5714
4 жыл бұрын
Thanks! And yes we know y’all need some more videos, we are working on doing better with getting more content. We’ve been pretty busy with customer stuff and that has taken us away from time to video, I’ve got a few more coming soon though!
I’m very impatient 🤣🤣 same here bro 💪🏼 great vid
Hey guys. Just wanted to say I’m enjoying your channel and am glad to see it growing. I’ve started mine as well. I hope to do half as well as you guys. Keep it up!!
I'm going to try this method. I bought a 56 F100 from my father in law have no idea how long it's been since it ran.
Should take the tappet covers off first and make sure none of the valves are stuck, you don't want the piston hitting a stuck valve and bending it
What is the FX spray called so I can try it.
Thanks for the video man
Was gonna throw out my datsun’s engine, this video saved it!
Very good video, one suggestion if I may, keep the camera close to you, the mic is on it. When you move too far from the camera, your audio drops right off
Great video , I myself also add mystery oil down the intake so the intake valves get it also etc... 👍
@resurrectionauto5714
4 жыл бұрын
I’ve used good old mystery oil a few times and it also works awesome! In the video when I try to fire it up I’ll throw some in the oil to help free stuff up!
@scionnn
Ай бұрын
@@resurrectionauto5714 nice scion
Got a ford 460 that had an oil pan full of water, been sitting for 7 years... Trying to get her to turn over.
would love too see if this motor will start.. keep them coming .. great video
Love the kittens
there is a product called FREE ALL, i used it on my 2.2 mopar turbo motor is sat all winter last year and got flash rust on the cylinders,i'd pulled the pan a few years ago and it was a brand new short block installed in my car by a dealership years ago,this stuff i shot it down the cylinders and it freed up this new engine, used the whole can,i was desperate,is worked the engine runs ,no smoke just like it did,try it,i swear by it,its in a blue and silver can,i bought a whole case,now when i let engines sit, fill the cylinders thru spark plug holes,and make them wet before storage,shoot is down the intake real good prior to storage no surprises anymore,give it go,the stuff is 6.00 dollars a can worth it
I have the same problem as this, I filled the cylinders with WD40 first, and after couple of days I filled them with tf. It has been like that for 4 days now, tomorrow I'm gonna try rotating the crankshaft. My engine was left about 6 years under the rain without spark plugs.. that is really tough. Thank you for sharing.
@raymondkarlsen9995
3 жыл бұрын
How did it end?
@theriderider2204
3 жыл бұрын
Damn he ignored the hell out of you. Rip
@ee546636
2 жыл бұрын
Did you get it ?
@huskyvacs
2 жыл бұрын
Diesel and a bit of oil mixture in all the cylinders and leave it sit. That will break up a lot of the rust. Keep in mind diesel will eat away rubber - which you will be replacing anyway - but keep that in mind. WD40 will not do jack shit. No idea why people keep using WD-40 for things its not intended for.
@garysuarez9614
Жыл бұрын
@@huskyvacs "Water Displacement 40" mentions nothing of penetration or derusting action.
What her doing a cat😂❤❤❤
Thanks boys
Cool
Where do I put the trans oil in?? Spark plug holes?
@skn9895
3 жыл бұрын
Yes. Pour it in through the spark plug holes. Also a good idea to pour some into the intake manifold and to remove the valve covers and check for stuck valves.
@goldteethman8720
2 жыл бұрын
In the hubcap
@rcnelson
4 ай бұрын
Be sure to drain the blinker fluid first.@@goldteethman8720
I have a 2012 Buick Lacrosse. My son ran the engine out of oil. It is sized. Can it be fixed?
@resurrectionauto5714
Жыл бұрын
Negative. Need new motor there.
Where is the next video where they try to start the engine?
First of all, yes, its most important to free the slugs AND protect the cylinder walls from scoring. So flooding the cylinders with a good thin lube product is the first step. But it is ALSO highly recommended to pull the valve covers and lube the valve guides and lube the rockers and lifters/ camshaft lobes. It a lot of cases though guys are planning to buy a hi pro cam and kit from the aftermarket, so....
I love the cat's 😻😻😽😽
marvel works great to
Did Curly have the day off?
@scionnn
Ай бұрын
Lol
All lubrication comes from. Below
That engine ain’t seized the fan is turning as he is pressure washing it?
@resurrectionauto5714
10 ай бұрын
That’s the water pump. Water pump can spin freely despite the motor being locked up
@johnhegarty1761
8 ай бұрын
It'probably aclutch fan bingo,
Pour the trans. fluid down the carb. It' go to all the cylinders at once.
Lol thought it was a gaming video
So, the Cat’s name is Jesus?
I'ts out of a car you can tell by the water neck
try ATF and Acetone - Maybe wait for 10 to 15 minutes B4 U turn over the engine
Penatrin spray
Pin your engine stand
Yes, let’s hose down the old junkyard motor w a pressure washer……. What could it hurt at this point…..?🤣🤣🤣🤣
Yr ll
Get a clip on microphone.