Sir ,Im 64 years old, Been working on cars sense 12 years old, Did my first engine rebuild at 14, And I don't mean rering cheap job, Fitted ring grinding ring to fit, Ported and polished heads,Gauge all bearing, Now I have freed up lots of motors, Some frozen 60 years, Oil does not work, Brake fluid works best, Let it sit 1 month, If the car is standard, 95 % Success rate, Pull the car 40 mph Pop the clutch in 4 th gear.It has freed every motor, There was a ford 3/4 ton sat in woods 40 years, Frozen from the start, Thats why was parked and forgotten, 2Months I left to soak in Brake fluid, First Pull Pop free, Started and drove home 40 miles, So taken apart the Motor every time, You don't have to,, If the Car is worth 70, thousand, It should be dismantled anyway, and rebuilt, There are chances you take, could Brake a rod, bend a valve, but most of the time, it comes free with no Damage, Just trying to Help.

I've done the same but advocate getting the offending piston(s) smoking hot with a torch prior to whacking. Rings seem to release from the pistons sooner. Otherwise put it back to gether with clean oil and fuel and run it hard for a couple hundred miles. It should wake back up if it's going to.

Marvel Mystery Oil. Only the U.S. auto industry could come up with that name/that product. Great video again Steve.

"Distilled White Vinegar" works almost instantly. Marine Technicians use for the same use too.

@Ratridez

6 ай бұрын

Watch Uncle Tonys Garage , Tony experimented with some old pistons with stuck rings with different oils and vinegar worked almost instantly .

@garybuffington6021

6 ай бұрын

saw that video long before I posted. I am a Master Automotive Technician (former FL LEO too) who had already tried everything in the video you refered to many years before that video was posted along with a few other chemicals not tested in his video too. @@Ratridez

Steve -- You're one of the Best "How-To" guys on the Tube. Showing Us Noobs things we would never think (block & Hammer) about trying. Definitely "not your first rodeo." Thanks So Much for Making these vids.

LOVE these type of videos! Wish they were longer.

@jakemandude7974

11 ай бұрын

Jesus Loves you (John 3:16) He died for you Put your faith in Him and turn from your sins before its too late.

Thanks again Steve for taking the time to make another video! Your one of my favorite channels on KZread! Take care and see ya on the next one!

I marvel constantly at your patience, Steve :)

Good content, always enjoy when Steve uploads new content. Always informative.

What amazing skill and patience you have.

Well done steve these engines were the best and it is great you share your knowledge with us

Time to disconnect the banjo fitting for the oil pump and fill the pump with fresh oil, check oil level and see if oil pressure will come up. Well done Steve! Cheers from Texas!

That’s a great way of getting it moving. Slow and patient is the best thing!

I like these Bugeye’s. It good to see it getting ready to go back on the road. Ive not seen one of these in New Zealand for years. Well done.

Excellent video. Great to see those Brit 4 cylinder motors spinning over again.

You make it Look so Easy !

Love the old British stuff. Keep ‘em coming.

Another GREAT VIDEO Steve !!! Keep e'm com'in !

This is helpful Steve. I recently acquired a 20’s Nash with a seized engine. The head is already off and it’s been soaking for a year or so in diesel. The cylinder walls look no worse than the Sprite. I think I will give this trick a try.

Great work! I think she'll be a runner now.

I've done that a few times using transmission fluid sometimes WD-40 before they had blaster it may take a couple weeks but you have to be patient. Remember put it in 4th gear absolutely do not use a hammer. Patience is a virtue.

@gregk.6723

6 ай бұрын

50-50 of acetone and brake fluid for a few days, works great for me for over 45 years.

@gavinsmith5929

3 ай бұрын

Put it in 4th gear so you can rock it is that what you’re saying?

I have done the same with the wood in the past. If you had not tried it I was going to suggest it. It doesn't do the engine any harm as long as you are not too agressive! I am sure it will be fine to put it back togethe now as the bores look ok. Thank's Steve, I always like these sort of videos.

First time I have seen it done that way, very interesting and a good way to save the pieces.

Really enjoy your content, keep up the good work.

A great result Steve.

Nice work Steve! Looking forward to hearing Barn Sprite 3 fire!

Learned so much! Thank you!

Derek at Vice Grip Garage would not only have already freed the engine and is on his way home 900 miles away.

nice work Steve.

Awesome video man. Lots of fun ❤

Great content. Nice work!

Very satisfying seeing it freed up! I'd like to see much more on this Sprites revival.

@jakemandude7974

11 ай бұрын

Jesus Loves you (John 3:16) He died for you Put your faith in Him and turn from your sins before its too late.

_Mirabile dictu._ Miracles never cease.

Love these types of videos, very educational and gives confidence to go for it. How handy is the borescope, right? When you need it, you need it. And it's not like in days past where you had to be a specialist to own one, borescopes are SO inexpensive nowadays, yours is a nice scope from a brand name, but cheapo scopes on Amazon are what $20? $25? And they work just fine. Mine connects to my phone, fits right down into pretty much any engine. I've used it on my weed whacker engine, lawn mower, Sprite, Midget 1500, Jeep wrangler straight 6 etc and then turned around and stuck it in a hole in the ground to see who is home and works just fine each time.

Nice job Steve

Thanks for sharing

Great content, keep it coming Steve.👍

@ThisWeekWithCars

2 жыл бұрын

Thanks, will do!

Nice work, very helpful, thanks. Can’t remember the last time I used a whitworth spanner

Good demonstration

Fab video, really enjoyed it 👍 great to see shared knowledge from a professional. Any chance you could have a flow up video as you prepare and run the engine 🤔

Great job!

cannot wait to see it on the road great stuff thanks

@ThisWeekWithCars

2 жыл бұрын

You and me both!

Awesome video! 👍

This was a great video!

Good job 👏

I always wanted one of these little cars. So much fun no need to be a road burner.

The engine looks good and I'm sure it will be fine. There is less back ache when working on these engines in a Mini, but other than that they are exactly the same. A new head gasket and it will be running. Well done Steve.

@jakemandude7974

11 ай бұрын

Jesus Loves you (John 3:16) He died for you Put your faith in Him and turn from your sins before its too late.

Looks Good. Fingers crossed.

I have watched many videos on freeing stuck engines, the prevailing trend is to soak things with penetrating oils of various kinds. That will be needed eventually but if rust or other metallic corrosion is the problem and it usually is, penetrating oils don't measure up to the task of breaking up those bonding agents. Success always comes down to leverage in the right place, heat if possible and an agent that actually attacks rust and galvanic corrosion, then there is a need and use for the various oil solvents for lubrication when moving the stuck parts.

Can't tell you how many KZread channels find an old engine (in or out of car) and they immediately see if it will start. Those are channels I never watch again. They are amateurs and for sure they cause damage to the engine cranking on an old dry engine. I restore vintage motorcycles and I always at least pull the valve cover, spark plugs and check for broken parts. Then I use PB Blaster to free up any sticky rings and let it sit with oil in the cylinders. Will pull the head if the engine won't turn over. Sometimes do a quick hone if the cylinders need it. What you found is usually what I find as well. A bit of rust and carbon build up. If still tight, I end up taking the engine apart to check bearings. But easier to do with a MC engine.

@ThisWeekWithCars

2 жыл бұрын

Some cars you can slip the bearings out without removing the engine. On this engine you cannot remove the rear main cap to check the crank bearings without removing the engine.

If there is a corrosion issue freezing the pistons you need to be careful. Even when the engine breaks lose, sometime the rings will freeze in their grooves or within a portion of their grooves. As the engine warms up, the pistons will expand on one wall of the cylinder and can freeze up badly. If you have any doubt, pull up the piston, check the rings and clean grooves as needed. If you remove the rings, do it carefully and put them back exactly the way they came out.

Nice little bug Mobil, that engine dosent look like it's done many miles, thanks for the video, all the best to you and your loved ones

I worked on a 50's something MG(A?) with a seized engine. Diesel fuel, time and a breaker bar and one of the cyl. liners popped out!

great job

Steve - “Just a little tap” No one - Steve - *WHACK*! Dwl 😂😂

Thanks for this I do like these videos

Long as the carbs and the points/etc are fine or are fixed, should be a runner now!

Wow you brought back memories of myself working on Boats back in the late 90's.. We had a 4x4 piece of wood that we called the "Mercury Tool" to free up frozen engines.. Too Funny.

thank you

That was kick-ass! Glad you freed it up. One suggestion brother, gloves! 🙃

Ah yes ...Marvel Mystery Oil with the addition of Steve's Wonder Wood ! 🤣🤣🤣🤣

@johnwren3976

2 жыл бұрын

Sounds like the girls would go crazy! 😛

Great video! Gotta feel good when you get a stuck engine turning again...

@ThisWeekWithCars

2 жыл бұрын

For sure!

Great info gd video

I have been a mechanic since childhood and professionally for fifty years, in my experience "penetrating" fluids do absolutely nothing unta=il after you've got things moveing, I have seen bolts soaked for weeks in these mirical products and when you finally shift them the threads are still as dry as a bone, I still use them though, it's almost a religion. By the way, I've freed off loads of engines by the hammer and block method, they are usually ok.

You are a genius.

Splendid!!

Great job Steve Nick Australia

I’m looking forward to a follow up video to see Barn Sprite #3 as a runner. Interesting “break loose” video.

Winning like Mr Sheen!!

Nice work, Steve! Clearly the rice must be on the off-side of the pistons on this one!

I have added a 20% vinegar solution to a seized motor(water entry) & when I checked later there were shard’s of rust sticking out from bore wall.(I had removed head).I will vacuum out deposits then add CRC(anti seize thread conditioner) & hope for the best. Good luck with u seized motor but I think u indicated that the piston was moving with the use of HAMMER & importantly block of wood. Cheers, Cliff, Wanneroo,Western Australia

love these ond English sports cars

This is great, I’m working on my MGB and it’s in the same state. It’s like you’re working on my engine! 😊I have been squirting Marvels in all the holes for a couple of months while I work on the floor pans. Hope I have as good of luck. 👍 P.S. were you rocking it in 1st gear?

Rings could be rusted in place to piston in compression (particularly the multi piece oil rings). You should use a PB Blaster soak to free them up a bit.

That will work so cool

Good video. Before you remove the rocker arm shaft you should have looked to determine which cylinders were on the intake stroke. Tapping on those would have yielded better results. Also you should have thoroughly lubricated the cylinder walls before hitting this starter. Just my two cents worth from 47 years of restoring classic cars

@anonymike8280

7 ай бұрын

The base of Mystery Oil is 10 weight oil. There is a reason why it is red, although don't put it any modern automatic transmission.

@Phantoma3

6 ай бұрын

@johnw6498, I have an old Ford with 55k miles on the odometer which has a 351C and has been garaged and not started in 35yrs. What should I use to spray the cylinder walls for lubrication through the spark plug holes before turning the engine over? Should I fill the cylinders with Mystery Oil for a few days. Is that oil thin enough to travel past the rings? BTW, I do have one of those snake cameras which I can feed through the spark plug holes.

@anonymike8280

6 ай бұрын

@@Phantoma3 You need to research what to do. Any light oil would be good enough for the cylinders if the engine fires up immediately. However, you need oil in the bearings, on the timing chain, on the camshaft and on the lifters. You can pump oil around by pulling the distributor and using a drill or some other tool to spin the shaft that drives the oil pump. Or, you can crank the engine with the starter or spin the engine with an impact wrench. With the spark plugs out. I have seen videos where someone apparently dry starts an engine that has been dormant for decades. Again, you need to research the issue until you understand totally what you are trying to accomplish, and the cylinders are only part of it. Another pitfall is that there are lot of Dr. Doom types out there who make things excessively complicated and warn you about what will happen if you do not follow their convoluted protocols.

@Phantoma3

6 ай бұрын

@@anonymike8280 Thanks man, it never even crossed my mind to first get the oil pump squirting oil over the lifters, camshaft and timing chain etc. I want to make sure that everything is lubricated before trying to start it up.

@anonymike8280

6 ай бұрын

@@Phantoma3 ​ @Phantoma3 Talked to a friend of mine today and he said, take off the valve covers and pour oil over the rocker arms and down the pushrods. This, he said, would lubricate the lifters and get oil onto the camshaft. You should be ready for some oil leaks after it gets running. In that long a period of time, every gasket could shrink. Unfortunately, the rear main bearing seal could be leaking too. The engine itself undoubtedly is as good as it was the last time it ran. Then there's the transmission. It could leak too from the pan, the front or real seal and even the dipstick tube. Don't forget the differential either. It could leak from the cover or the seal. Then there are the axle seals. And, of course, the cooling system. There could be wiring that has deteriorated over that much time. Then there's the fuel system. That could have leaks too. So could the carburetor. There could be a lot to do.

I had the same problem with a tractor engine (had water sitting in the cylinders for quite a while and wouldn't move at all) soaked the cylinders with vinegar for a couple of days then oil for a day and used a block of timber and steel plate using the head bolts to create a makeshift press (took about 30 minutes of rocking it back and forth using the makeshift press and it freed up nicely) it's running quite nicely only needing an oil change

@ThisWeekWithCars

Жыл бұрын

I like that idea I might try that!

Brilliant channel. I love learning new stuff every time! 🇦🇺🏳️‍🌈

reminds me a lot of working on my triumph herald engine.

Your patience and perseverance were the keys to unseizing that engine.Those concoctions they sell are useless and costly.Plain white vinegar is the best and cheapest rust remover on the planet.Its also friendly on the environment.

seized engines are tricky .! I have found that if the engine is/was know to rotate . I have heated fuel oil , careful, not to allow the fuel oil to BOIL . This causes the piston (Aluminum to expand breaking the corrosion around the cast iron block and the piston. Then you can do your mystery oil treatment and not have wasted time.

Support

Boil some 5w30 oil till it’s about to ignite and tip in the bores after it just starts to cool turn the engine over works evertime dangerous but works great never flat spot a shell or bend a rod with hammer and wood heat expansion contraction even a few times till it move without a hammer 👍🏻

Ive had 3 seized engines in the past, I oiled the cylinders, set for a couple days, then pulled the vehicles with a chain, dumping the clutch in gear. All broke loose.

I used Marvel Mystery Oil and Liquid Wrench. When it soaked through I whacked it with a big fence post.

For freeing up stuck engines oil won't penetrate down along between the pistons, rings, and cylinder walls. A good penetrating fluid that works well and is cheap is a 50/50 mix of acetone and atf. White vinegar is a bit slower, but works well, it also removes rust. Store bought versions work well, but cost more. PB Blaster is a good one for the money. WD-40 is a waste of money for this job.

@ThisWeekWithCars

2 жыл бұрын

Marvel Mystery Oil is not an oil like you would think of. It is Methyl salicylate (oil of wintergreen or wintergreen oil) which is used in a lot of different fields but is used as a penetrating oil to loosen rusted parts especially engines.

Remove head..and crank...tap pistons downward using large block of soft wood

I got a truck one time and that the motor has been sitting open for 12 years it had wasp nest it had grass growing in the cylinders and I never thought it would spin again I did some cleaning and soaking for a bought a month and she turned over I pulled the motor out disassembled it and took it to the machine shop they had to burn the block to get the rest of it out of it she ran really well then she dropped a valve so yeah lesson learned never trust valve springs that has been sitting for long time thankfully it was a 4 cylinder no big Lost but I did loose interest after that great job on the free up

On a water cooled engine, would circulating hot water through the system expand the cylinder bores by enough to free a stuck piston.... Assuming its not a bottom end or crank ptoblem?

Back in the day i used atf . This never failed me. Lucky ?

When you added the marvel mystery oil in at the end of the video- did you let that sit for a while or just continue to run the starter and let it get into the pistons?

It seems to me there ought to be an ultrasonic probe that could immerse in the oil - or whatever fluid of choice.

Love what you're doing,but I thought A series engine's were AF sizes

Put a magnetic oil pan heater on it, and leave it on for many days. Heats up the engine and allows stuff to flow.

Have the valve seats been hardened on this one?

You know if oil leaks past the rings its a bad cylinder because the rings seal the air in the chanber.. the cylinders are lubricated from below.

Hint, use 50/50 mix of ATF and acetone. Acetone will find its way through and carrie the oil with it.

@toml6092

11 ай бұрын

Atf and acetone works So does diesel Mmo works the best imo

@randypond7499

9 ай бұрын

Shake it up good. They don’t mix well.And acetone evaporates quickly so only mix it when you need it

Could this work on a 3 cylinder motorcycle?

One step at the time, there vil always happen something to the end..👍🏻👍🏻😄

I think he’s done this a few times. I’m pray my Willy’s breaks lose tomorrow. It’s been soaking and diesel fuel an automatic transmission fluid for six months..