link to purchase synch tool: www.ebay.com/itm/Weber-Dellort...
Жүктеу.....
Пікірлер: 110
@mrgrouchyguy6 жыл бұрын
Your such a huge help for everyone, can't thank you enough for all the help and video tech tips keep them coming . 👍
@kevingalindo1
6 жыл бұрын
mrgrouchyguy For sure
@brandonm7824
5 жыл бұрын
@@kevingalindo1 great videos !
@Alexs-ri3xv6 жыл бұрын
Thank you for making this video my Banshee was running rough i got one of those tools and she is running good thank you again for the good content
@gerhardpotgieter90912 жыл бұрын
One of the best explanations out there of how to do it.
@martynspangles4 жыл бұрын
Thank you for this video, it's going to make syncing the carbs on my bike so easy!
@quadzilla26b7 жыл бұрын
God bless you😊 thank you 🙏 so much for your videos! Your Channel is so underrated I hope your channel blows up🙂 good luck and thanks again keep up the awesome work.
@kevingalindo1
7 жыл бұрын
quadzilla26b That would be awesome ! Help spread the word! More to come soon,I'm still recovering.
@UkrainerWinklernovsky2 жыл бұрын
the trick with the Loctite is worth gold my Friend, but always use the jam nuts on the idle screws, because this will reduce possible air leaks even more.
@raymondj87686 жыл бұрын
wow you can hear the diffrance sound great dude !!!
@cameronmardis3 жыл бұрын
Thanks so much buddy! This helped a lot and I appreciate the detail and the link to the tool!!!
@leithbooher9196 Жыл бұрын
Appreciate all the videos I've picked up a lot from you!!
@juanpinero7084 жыл бұрын
The best tuned carb video 🙏💯💪🏿
@WestCoastRoller7 жыл бұрын
thanks for explaining how to properly do this procedure
@mske9033 ай бұрын
actually a nice idea, with the fan in front of the radiator. but make sure that there's no dust and sand all over the palace, which could be blown up by the fan and eventually end up inside the engine.
@Hammyrobux1113 жыл бұрын
Appreciate u so much. Clutch pancake bearing needs adjusted on this bike. omg its So Beautiful. U still got this bike kevin? I been just chilling watching you're videos again Reminds Me how much help u were too me when i got back in the Game!!! U forget allot in 10 years!!!
@TheNoise08084 жыл бұрын
Best tutorial God bless you and your family.
@seamlessny27207 жыл бұрын
awesome vid I've been looking for something like this played it by ear and ended up going 6 and 11 going to lower it to 10 sound a pinch fast for me at 11 but half kick she's fires up so sweet!!!! good stuff here!!!!
@kevingalindo1
7 жыл бұрын
Seam Lessny Thank ya sir!
@rideordie2736
2 жыл бұрын
@@kevingalindo1 hey hy do you have it on 5 tho what's the numbers mean
@ebersalcido88104 жыл бұрын
Thank you so much I couldn't figure out what the hell was happening to my left carb
@kevingalindo1
4 жыл бұрын
Eber Salcido your very welcome !
@4hallinadventures8662 жыл бұрын
Good video dude 👌 A lot of practical info!
@350iroc94 жыл бұрын
Did you ever notice that your crossover tube was almost completely out on the left side? You can get a good view at 5:35. I wonder if you unfortunately sync'd with an air leak? Hope not but possible....
@JboneApocolypz2 жыл бұрын
awesome video dude. i love your content
@TimeLapseCarGuyBruno4 жыл бұрын
Great help!...I bought a TORS delete throttle cable off eBay and it seems long.. I can't seem to get rid of the slack..
@jaredscabinlife28684 жыл бұрын
Thanks for this video now I can do this to mine it’s way out of sync. I need to buy one of those meters you got
@bradstreeservicellc28945 жыл бұрын
Great video, very descriptive
@thomasstoddart2414 Жыл бұрын
Great video!!
@5x9bob533 жыл бұрын
subscribed...you rock man
@Hammyrobux1113 жыл бұрын
If u guys really appreciate this man he accepts fb messenger pay shoot him 5-10-25/50 Bucks these videos take hours too make not too minchin the tallent. ANOTHER THING I NOTICED. After i tipped Kevin 50bucks on the video's he literally answered all my questions and was such a big help he deserves it guy's!!!!
@joshuajackson81124 жыл бұрын
So how would u adjust it at high idle if you don’t have those top adjusters I have oko 30mm and they don’t have those
@shad36546 жыл бұрын
So before you sync them you have to get the idle right 1st correct? I buddy just bought the sync tool we cleaned out the carbs and rebuilt it
@robjohnson4260 Жыл бұрын
Big help thank you.
@quadrider41555 жыл бұрын
Hey I just hot my first banshee and have been building it for the last couple of months. It has a new top end and fmf fattys and k and n Air pods . what main jet should I put it it
@big_mike_nyc4 жыл бұрын
I just purchased this flow meter. What is the optimum setting we want our banshee carbs at? Should both carbs read 5 or 7 or 10??
@genenew24675 жыл бұрын
Would my cable be too long if I cabt raise idle by adjuster on the bars
@jessepatterson46196 жыл бұрын
Can you do a video on Cdi stage 2 instalment
@jayduperclay76666 жыл бұрын
What do u run your idle an your air screws at
@davidladd32907 жыл бұрын
I have a 1999, with stock exhaust, what would you recommend replacing the exhaust with? Thanks
@kohlholguin59595 жыл бұрын
just did tors delete yesterday, got it tuned at idle, when i went to put tension on cable but unscrewing it up on the bars nothing happens just chills at an idle still, i bought a motion pro tors delete. any advice?
@kolbyhanback50022 жыл бұрын
So I just ordered this part and have no idea what my carbs are going to show. So what would be a good number for me to set them at
@juliopena6446 жыл бұрын
Hey man do think i can send you a video of my banshee and if you can tell me if it is iddling right cause iam pretty new with this and dont want to blow my engine again i will highly appreciate an answer
@rameshh.m.wracingramesh67783 жыл бұрын
Could some please let me know the tool name and code for ordering the product
@jockbailey9663 Жыл бұрын
I have a race set up but can't get em resynced after adjusting the Floats 🙈🤯
@scmafia7515 Жыл бұрын
Can you use this for a single carb for like a 212cc predator for racing go kart?
@scaredyet2 жыл бұрын
Did you need the adapter as well for the tool or just use it straight out of the box
@Natmitchell2126 жыл бұрын
Cleaned everything emptied all fluids and my banshee will not stay on it turns on and idles for about 3 seconds and it dies. When I hit the gas it bogs out. Any idea what’s going on??
@mannysalinas66534 жыл бұрын
How many turns out do you have on air screw?
@johnytibo12822 жыл бұрын
Hey sorry but why would you set the idle with the cable if it was already done with the idle screw and how do you get the needed freeplay in the thumb throttle .hope your screw on the throttle wasn't all the way in ... you need to set idle screw to reach idle rpm play with air screw one way and other way to find happy medium set idle screw again since playing air air screw will change rpm then sync carb with aircrew and make sure carb clean idle screw barely pushing the slide up or gaz will flow straight to main jet
@440commando2 жыл бұрын
Could you provide me a link to this tool on ebay? The one in your description isn't available anymore. TIA!
@imme3932 Жыл бұрын
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @SouthTexasBanshee
@xxjsgamer2778 Жыл бұрын
When I get my banshee carburetors to #5 it idles low and dies?
@usf_14092 жыл бұрын
I can do same what are you doing and the same numbers for keihin carburetor or there’s something different ?
@piojomich854 жыл бұрын
What throttle cables are those???? My cables too a shit and need to replace them. What do you guys recommend???
@joshrolfe98907 жыл бұрын
Good video. I'm assuming these would work with 35mm keihin carbs too? Universal boot?
@kevingalindo1
7 жыл бұрын
Josh Rolfe Yup sure will, same exact procedure.
@robjohnson4260 Жыл бұрын
Your awesome
@traviswagner91142 жыл бұрын
Why not adjust the idle screw? Doesn't it do the same thing?
@romemac13806 жыл бұрын
Why is gas running out of the air filter part of my carbs???
@tonylessmore1189 ай бұрын
Awesome! Thanks brother. 98?
@michaeljohn89056 жыл бұрын
nice what year is that Bansh? Shes pretty...
@wyattbarton26784 жыл бұрын
Thank you so much for the help. I thought something was wrong with my frame but the motor does actually set a little closer to the pipes on one side. Is there anything I can do to keep it from hitting my left pipe?
@ericharper4197 жыл бұрын
Hey man, thank you for the awesome info! What type of gas tank is that?
@kevingalindo1
7 жыл бұрын
Eric Harper Hey bud it's just a tank cover from Nathan Wilmes, he's on facebook.
@ericharper419
7 жыл бұрын
Thank you so much man!
@mercury195016 жыл бұрын
I want to know where do I find a Synchro to like that and can it be used for snowmobiles
@kevingalindo1
6 жыл бұрын
Allen Jaeger Here’s a link to one on Ebay, I clicked on the first one I saw, you may be able to find a better price. If you can get to the carbs on the snowmobile it will work, they sell adapters as well to make it easier to get into tight places. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F272202975686
@traviswagner91142 жыл бұрын
I have an 87 shee. My carbs don't have an idle adjust screw? Why is that
@imme3932 Жыл бұрын
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @southtexasbanshee
@kingclark1007 жыл бұрын
My banshee. I'm having troubles with it running lean (poping & crackling) the bike is all stock besides fmf fatty pipes on it, have stock makuni carbs with stock jets I mix 40:1 my elevation is usually always below 800ft/250meters I have my main needle on my throttle set on the second clip from the bottom #2
@kingclark100
7 жыл бұрын
Also the air screw is two turns out, and I was wondering should I put fmf jets in it will it make the difference I like my bike rich on the smoking side... thanks
@kingclark100
7 жыл бұрын
I meant #4 clip position sorry
@luvjoebacon2915
7 жыл бұрын
kc woodzie Are you the original owner for the Bike? Also the best mix for them is 35:1. Any leaner isn't great. Also make sure you mix it with how much you have in a tank. I personally like mixing with 5 gal gas tanks since I use a lot of gas in the desert, so I have to do 35:1 twice since my mixture measure cup only goes to 2.5 gals
@ME-wq8lq5 жыл бұрын
Thank you. Same procedure for stock carb setup?
@kevingalindo1
5 жыл бұрын
Exactly the same yep.
@ME-wq8lq
5 жыл бұрын
@@kevingalindo1 thanks, I got a little more smoke comin out 1 pipe than the other, thinking it might not be synched
@cameronfilicky11956 жыл бұрын
I need help with my carbs left is smoking good right isn’t smoking almost at all
@TimeLapseCarGuyBruno
4 жыл бұрын
Mines doin the same.. could be carb sync is off or dirty/clogged carb.. or who knows
@TheLucky7seven77 жыл бұрын
What does it mean when one side is blowing out more than the other will this video help 🤔?
@kevingalindo1
7 жыл бұрын
Seven Yes it will, that's usually a carb synch issue. Put in new plugs before you do it.
@coltonhibler68915 жыл бұрын
Just bought a 97 banshee and I synced the carbs and cleaned the reeds and valves and all it does is backfire and pop any suggestions
@pcostyle11
5 жыл бұрын
Ik it might be late but change your spark plug cap. They go out often and thats exactly what they do
@jlsinc.1366 жыл бұрын
custom wrench for the clutch braaaaap
@prod.rickyp28912 жыл бұрын
Why don’t my carbs have idle screws
@nelsoncorbin86726 жыл бұрын
When I ride my Banshee when I give it Full Throttle it pops and stutters and won't open all the way what do you think that could be I cleaned the carbs are set the screws 1 and 1/2 turn like you said I don't know what it can be all I know when it idles the one side Muffler it has little more smoke to it the other side seems a little dead doesn't blow out as much
@ShortkillaProductions
5 жыл бұрын
Nelson Corbin mines having the same problem did you resolve it?
@ryanjamison89052 жыл бұрын
Where do you suggest buying the sync tool from ?
@kevingalindo1
Жыл бұрын
Here ya go ! www.ebay.com/itm/125142805205?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5e4Cn6PxQPq&sssrc=2349624&ssuid=U09MRCd9QLq&var=&widget_ver=artemis&media=COPY
@sergiovalenzuela4333 жыл бұрын
👍💯👌💪
@jaded8044 жыл бұрын
I take my idle screws all the way out and I’m still at 7 why is that?
@jocelynlapointe6929
3 жыл бұрын
Cable too tight maybe?
@mrgrouchyguy6 жыл бұрын
Where did you purchase your sync tool from?
@kevingalindo1
6 жыл бұрын
mrgrouchyguy FAST
@mrgrouchyguy
6 жыл бұрын
I'm looking for it but everything but fast comes up. What am I missing?
@kevingalindo1
6 жыл бұрын
mrgrouchyguy It’s farmandsandtoys.com Here’s one on Ebay rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F272202975686
@mrgrouchyguy
6 жыл бұрын
On my phone when i clicked on your video there's no link to where to buy the tool from, look on the home computer and boom there it is in the link description...phone platforms can suck it.
@zachstjeor6197
5 жыл бұрын
0
@jamesjiles81397 жыл бұрын
there is dif prices on synch tool's or they all the same
@kevingalindo1
7 жыл бұрын
James Jiles There are different ones. They 35-55 depending on the seller.
@jamesjiles8139
7 жыл бұрын
ok thanks that will help out a lot. witch one for tuneing banshee carb's
@kevingalindo1
7 жыл бұрын
James Jiles kzread.info/dash/bejne/l4x9t7ianbi6c6g.html
@kkashish707
5 жыл бұрын
@@kevingalindo1 is it direct fit on vm28 ?
@anthonymartinez24923 ай бұрын
Why does my engine backfire
@161helly5 жыл бұрын
Bro help me out with my banshee plz. I can’t start , how I can fix it
Пікірлер: 110
Your such a huge help for everyone, can't thank you enough for all the help and video tech tips keep them coming . 👍
@kevingalindo1
6 жыл бұрын
mrgrouchyguy For sure
@brandonm7824
5 жыл бұрын
@@kevingalindo1 great videos !
Thank you for making this video my Banshee was running rough i got one of those tools and she is running good thank you again for the good content
One of the best explanations out there of how to do it.
Thank you for this video, it's going to make syncing the carbs on my bike so easy!
God bless you😊 thank you 🙏 so much for your videos! Your Channel is so underrated I hope your channel blows up🙂 good luck and thanks again keep up the awesome work.
@kevingalindo1
7 жыл бұрын
quadzilla26b That would be awesome ! Help spread the word! More to come soon,I'm still recovering.
the trick with the Loctite is worth gold my Friend, but always use the jam nuts on the idle screws, because this will reduce possible air leaks even more.
wow you can hear the diffrance sound great dude !!!
Thanks so much buddy! This helped a lot and I appreciate the detail and the link to the tool!!!
Appreciate all the videos I've picked up a lot from you!!
The best tuned carb video 🙏💯💪🏿
thanks for explaining how to properly do this procedure
actually a nice idea, with the fan in front of the radiator. but make sure that there's no dust and sand all over the palace, which could be blown up by the fan and eventually end up inside the engine.
Appreciate u so much. Clutch pancake bearing needs adjusted on this bike. omg its So Beautiful. U still got this bike kevin? I been just chilling watching you're videos again Reminds Me how much help u were too me when i got back in the Game!!! U forget allot in 10 years!!!
Best tutorial God bless you and your family.
awesome vid I've been looking for something like this played it by ear and ended up going 6 and 11 going to lower it to 10 sound a pinch fast for me at 11 but half kick she's fires up so sweet!!!! good stuff here!!!!
@kevingalindo1
7 жыл бұрын
Seam Lessny Thank ya sir!
@rideordie2736
2 жыл бұрын
@@kevingalindo1 hey hy do you have it on 5 tho what's the numbers mean
Thank you so much I couldn't figure out what the hell was happening to my left carb
@kevingalindo1
4 жыл бұрын
Eber Salcido your very welcome !
Good video dude 👌 A lot of practical info!
Did you ever notice that your crossover tube was almost completely out on the left side? You can get a good view at 5:35. I wonder if you unfortunately sync'd with an air leak? Hope not but possible....
awesome video dude. i love your content
Great help!...I bought a TORS delete throttle cable off eBay and it seems long.. I can't seem to get rid of the slack..
Thanks for this video now I can do this to mine it’s way out of sync. I need to buy one of those meters you got
Great video, very descriptive
Great video!!
subscribed...you rock man
If u guys really appreciate this man he accepts fb messenger pay shoot him 5-10-25/50 Bucks these videos take hours too make not too minchin the tallent. ANOTHER THING I NOTICED. After i tipped Kevin 50bucks on the video's he literally answered all my questions and was such a big help he deserves it guy's!!!!
So how would u adjust it at high idle if you don’t have those top adjusters I have oko 30mm and they don’t have those
So before you sync them you have to get the idle right 1st correct? I buddy just bought the sync tool we cleaned out the carbs and rebuilt it
Big help thank you.
Hey I just hot my first banshee and have been building it for the last couple of months. It has a new top end and fmf fattys and k and n Air pods . what main jet should I put it it
I just purchased this flow meter. What is the optimum setting we want our banshee carbs at? Should both carbs read 5 or 7 or 10??
Would my cable be too long if I cabt raise idle by adjuster on the bars
Can you do a video on Cdi stage 2 instalment
What do u run your idle an your air screws at
I have a 1999, with stock exhaust, what would you recommend replacing the exhaust with? Thanks
just did tors delete yesterday, got it tuned at idle, when i went to put tension on cable but unscrewing it up on the bars nothing happens just chills at an idle still, i bought a motion pro tors delete. any advice?
So I just ordered this part and have no idea what my carbs are going to show. So what would be a good number for me to set them at
Hey man do think i can send you a video of my banshee and if you can tell me if it is iddling right cause iam pretty new with this and dont want to blow my engine again i will highly appreciate an answer
Could some please let me know the tool name and code for ordering the product
I have a race set up but can't get em resynced after adjusting the Floats 🙈🤯
Can you use this for a single carb for like a 212cc predator for racing go kart?
Did you need the adapter as well for the tool or just use it straight out of the box
Cleaned everything emptied all fluids and my banshee will not stay on it turns on and idles for about 3 seconds and it dies. When I hit the gas it bogs out. Any idea what’s going on??
How many turns out do you have on air screw?
Hey sorry but why would you set the idle with the cable if it was already done with the idle screw and how do you get the needed freeplay in the thumb throttle .hope your screw on the throttle wasn't all the way in ... you need to set idle screw to reach idle rpm play with air screw one way and other way to find happy medium set idle screw again since playing air air screw will change rpm then sync carb with aircrew and make sure carb clean idle screw barely pushing the slide up or gaz will flow straight to main jet
Could you provide me a link to this tool on ebay? The one in your description isn't available anymore. TIA!
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @SouthTexasBanshee
When I get my banshee carburetors to #5 it idles low and dies?
I can do same what are you doing and the same numbers for keihin carburetor or there’s something different ?
What throttle cables are those???? My cables too a shit and need to replace them. What do you guys recommend???
Good video. I'm assuming these would work with 35mm keihin carbs too? Universal boot?
@kevingalindo1
7 жыл бұрын
Josh Rolfe Yup sure will, same exact procedure.
Your awesome
Why not adjust the idle screw? Doesn't it do the same thing?
Why is gas running out of the air filter part of my carbs???
Awesome! Thanks brother. 98?
nice what year is that Bansh? Shes pretty...
Thank you so much for the help. I thought something was wrong with my frame but the motor does actually set a little closer to the pipes on one side. Is there anything I can do to keep it from hitting my left pipe?
Hey man, thank you for the awesome info! What type of gas tank is that?
@kevingalindo1
7 жыл бұрын
Eric Harper Hey bud it's just a tank cover from Nathan Wilmes, he's on facebook.
@ericharper419
7 жыл бұрын
Thank you so much man!
I want to know where do I find a Synchro to like that and can it be used for snowmobiles
@kevingalindo1
6 жыл бұрын
Allen Jaeger Here’s a link to one on Ebay, I clicked on the first one I saw, you may be able to find a better price. If you can get to the carbs on the snowmobile it will work, they sell adapters as well to make it easier to get into tight places. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F272202975686
I have an 87 shee. My carbs don't have an idle adjust screw? Why is that
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @southtexasbanshee
My banshee. I'm having troubles with it running lean (poping & crackling) the bike is all stock besides fmf fatty pipes on it, have stock makuni carbs with stock jets I mix 40:1 my elevation is usually always below 800ft/250meters I have my main needle on my throttle set on the second clip from the bottom #2
@kingclark100
7 жыл бұрын
Also the air screw is two turns out, and I was wondering should I put fmf jets in it will it make the difference I like my bike rich on the smoking side... thanks
@kingclark100
7 жыл бұрын
I meant #4 clip position sorry
@luvjoebacon2915
7 жыл бұрын
kc woodzie Are you the original owner for the Bike? Also the best mix for them is 35:1. Any leaner isn't great. Also make sure you mix it with how much you have in a tank. I personally like mixing with 5 gal gas tanks since I use a lot of gas in the desert, so I have to do 35:1 twice since my mixture measure cup only goes to 2.5 gals
Thank you. Same procedure for stock carb setup?
@kevingalindo1
5 жыл бұрын
Exactly the same yep.
@ME-wq8lq
5 жыл бұрын
@@kevingalindo1 thanks, I got a little more smoke comin out 1 pipe than the other, thinking it might not be synched
I need help with my carbs left is smoking good right isn’t smoking almost at all
@TimeLapseCarGuyBruno
4 жыл бұрын
Mines doin the same.. could be carb sync is off or dirty/clogged carb.. or who knows
What does it mean when one side is blowing out more than the other will this video help 🤔?
@kevingalindo1
7 жыл бұрын
Seven Yes it will, that's usually a carb synch issue. Put in new plugs before you do it.
Just bought a 97 banshee and I synced the carbs and cleaned the reeds and valves and all it does is backfire and pop any suggestions
@pcostyle11
5 жыл бұрын
Ik it might be late but change your spark plug cap. They go out often and thats exactly what they do
custom wrench for the clutch braaaaap
Why don’t my carbs have idle screws
When I ride my Banshee when I give it Full Throttle it pops and stutters and won't open all the way what do you think that could be I cleaned the carbs are set the screws 1 and 1/2 turn like you said I don't know what it can be all I know when it idles the one side Muffler it has little more smoke to it the other side seems a little dead doesn't blow out as much
@ShortkillaProductions
5 жыл бұрын
Nelson Corbin mines having the same problem did you resolve it?
Where do you suggest buying the sync tool from ?
@kevingalindo1
Жыл бұрын
Here ya go ! www.ebay.com/itm/125142805205?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5e4Cn6PxQPq&sssrc=2349624&ssuid=U09MRCd9QLq&var=&widget_ver=artemis&media=COPY
👍💯👌💪
I take my idle screws all the way out and I’m still at 7 why is that?
@jocelynlapointe6929
3 жыл бұрын
Cable too tight maybe?
Where did you purchase your sync tool from?
@kevingalindo1
6 жыл бұрын
mrgrouchyguy FAST
@mrgrouchyguy
6 жыл бұрын
I'm looking for it but everything but fast comes up. What am I missing?
@kevingalindo1
6 жыл бұрын
mrgrouchyguy It’s farmandsandtoys.com Here’s one on Ebay rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F272202975686
@mrgrouchyguy
6 жыл бұрын
On my phone when i clicked on your video there's no link to where to buy the tool from, look on the home computer and boom there it is in the link description...phone platforms can suck it.
@zachstjeor6197
5 жыл бұрын
0
there is dif prices on synch tool's or they all the same
@kevingalindo1
7 жыл бұрын
James Jiles There are different ones. They 35-55 depending on the seller.
@jamesjiles8139
7 жыл бұрын
ok thanks that will help out a lot. witch one for tuneing banshee carb's
@kevingalindo1
7 жыл бұрын
James Jiles kzread.info/dash/bejne/l4x9t7ianbi6c6g.html
@kkashish707
5 жыл бұрын
@@kevingalindo1 is it direct fit on vm28 ?
Why does my engine backfire
Bro help me out with my banshee plz. I can’t start , how I can fix it
How the name of that tool?
@kevingalindo1
3 жыл бұрын
Here ya go my man. www.ebay.com/itm/123323160699
@TOYOTETO
3 жыл бұрын
@@kevingalindo1 thanks a Lot 👍🏻🇵🇷
@TOYOTETO
3 жыл бұрын
Thanks a Lot 👍🏻🇵🇷
The engine is stock