How to stop your Harley engine overheating in traffic What is Harley EITMS
How to stop your Harley engine overheating in traffic - What is Harley EITMS - Here I discuss the Harley engine and how it can overheat in hotter temperatures whilst in stationary traffic. I also talk about how Harley have a solution to assist the cooling of the engine and it is through the Engine Idle Temperature Management System - EITMS
The following is the basic criteria for it to automatically shut down or re engage if EITMS is enabled:
EITMS will activate (rear cylinder will turn off) when all of the following condition are met:
Engine temperature is greater than 287°F domestic 165°C international
Twist grip opening is at idle
Vehicle speed under 1 mph 2 km/h Engine speed under 1200 RPM
EITMS will disable (rear cylinder will again fire) if any one of the following occurs:
Engine temperature falls below 275°F domestic 135°C international
Twist grip opening is greater than idle
Vehicle speed exceeds 2 mph 3 km/h Engine speed exceeds 1350 RPM
Clutch is released with vehicle in gear
The ambient temperature is generally considered needs to be 80degF for it to activate.
To enable it, you roll the throttle into the off position and hold it there for a few seconds and wait for the cruise indicator lamp to flash green...to enable or flash orange...to disable.
CLICK THIS LINK TO SUBSCRIBE TO MY CHANNEL at: bit.ly/Revelato...
#RevelatorAlf #HarleyEngineOverheat #HarleyEITMS
All information, contacts and links are available at: revelatoralf.com
Podcasts available to listen at:
SoundCloud: bit.ly/2Kp5KE9
Spotify: spoti.fi/2VxUSVm
iTunes: apple.co/2VyUYfF
Help support the channel: paypal.me/Reve...
Become a Patron: / revelatoralf
DISCLAIMER: This video and description may contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
RevelatorAlf Merchandise - Ye Olde Shoppe: bit.ly/2KplmXZ
RevelatorAlf Email Distribution List: bit.ly/2Z0qbu8
Amazon RevelatorAlf Review/Wish List: amzn.eu/00Pb5Tl
Website: revelatoralf.com
Twitter: bit.ly/2X46G25
Facebook: bit.ly/2UMW8qA
Reddit: bit.ly/2IbicFu
Tumblr: bit.ly/2GeJKaQ
Instagram: bit.ly/2UraD41
LinkedIn: bit.ly/2Z2fuHv
VK: bit.ly/2uU8FtQ
Пікірлер: 187
Check out my other How To Video in this playlist here: kzread.info/head/PLmgCmljtdCzWJFCF9Xaq1LTgJC0b3EWq8
If you have it activated in cold weather. It will not engage that feature anyway. So people can might as well have it activated all the time.
This was a huge help to being concerned when my new bike overheated in traffic for the first time. Thank u Sir! 👍
@RevelatorAlf
4 жыл бұрын
james adamsjohnson you’re welcome.glad it helped. Cheers
One of my ironheads is a late 84. Last of the iron sporties. I put a fan in front of my oil cooler with a small shroud. Has a switch to turn on and off. Works great . Or I just shut the motor off until traffic moves. My other bikes I just shut it off. Lots of fun with a kick only chopper but I havent overheated my bikes
I found a great solution, I’ve got a Goldwing
@T-zn6wt
10 күн бұрын
May I ask what you did.
EITMS is purely for rider comfort. When it activates and“shuts off”the rear cylinder, it’s not because the motor is overheating. It’s designed to reduce the heat radiating from the rear cylinder to the rider.
@RevelatorAlf
4 жыл бұрын
Yes indeed
@goldilocks913
2 жыл бұрын
My scrotum salutes them!
@HennieBours
Жыл бұрын
Exactly. Nothing to do with overheating the second cylinder.
I'ts always interesting to learn. I dont remember to have read about this in the specs data...
@RevelatorAlf
5 жыл бұрын
You're welcome. Any new info I'll try to let you know Cheers
Mine is always on, and works even when it is not very hot outside. When its cold you can leave it enabled because the cilinder disabling doesn’t work, the engine does not overheat though.. so this option is best when enabled…and forget👍🏼
@RevelatorAlf
2 жыл бұрын
Yep cheers
Thanks!
Mate your a life saver live in the states Florida to be specific and this is needed
@RevelatorAlf
3 жыл бұрын
Thanks so much. Cheers
Thank you so much i was worried that something was wrong this is the only place i found this info
Wow great information thank you for actually sharing this information something we all need to know VERY CRITICAL INFO.
I really appreciate your videos, I'm learning a lot about my sport glide that I wasn't aware of !!
@RevelatorAlf
3 жыл бұрын
Thanks so much
Thanks for the video. For info all the fuel injected models have this system. The rider can enable/disable on fly by wire bikes. The cable throttle bike have the system but you have to get the dealer Tom enable.
@RevelatorAlf
3 жыл бұрын
Cool, thanks
That's great info. I have worried about my bike in the hotter than hell Oklahoma summers and riding in a city with over 1 million residents. I will activate my Sport Glide ASAP.
Alf, Great info. My plums thankee, kindly! Mike
@RevelatorAlf
5 жыл бұрын
Ha ha you're welcome Mike. Don't forget that tinfoil fella ha ha
No way!! Thank you so much!!! This helps alot!!!! I didn't know that as well
Fantastic, just bought a Sport Glide and didn't know about this feature. Thank you !
@billgonzales8978
3 жыл бұрын
does your new bike have a factory oil cooler non it?
@Info-Med
3 жыл бұрын
@@billgonzales8978 yes
Thanks Alf... as always really appreciate you sharing your knowledge
@RevelatorAlf
3 жыл бұрын
Thanks Eric
Thanks Alf. Good info that I wasn’t aware of. I do suspect that mine is enabled from factory on my 2019 Road King. I say that because I usually detect a stumble and then a notable difference in idle. I will verify as soon as possible.
@RevelatorAlf
4 жыл бұрын
Ok great. Thanks and glad you’re finding the videos useful. Cheers
@billgonzales8978
3 жыл бұрын
Harley F---up, my friend bought a new 1984 top of the line new softail new EVO motor, Kick and electric start, 100,000 miles later he still rides it but he also rides a newer ultra classic no heating problems with them old Harleys?
@RevelatorAlf
3 жыл бұрын
Cheers
Excellent video Alf! As usual very informative and helpful to me. I have a 2020 heritage classic and had no idea about the EITMS feature. I'm thinking the oil cool system will keep it from overheating. Why would this feature ever be disabled? IMO just keep it on, its a safety feature. These bikes are expensive and, to me, there is no reason for the bike to overheat regardless of how long the rider is idling.
@RevelatorAlf
3 жыл бұрын
Thanks so much Tony. Yes keep it on in my book too. Does no harm really. Cheers
Thanks dude, I thought that's what was happening, but I wasn't sure if there was a fault. 👍
@RevelatorAlf
3 жыл бұрын
Cheers
Great info thanks
Fantastic mate. Keep the videos coming
@RevelatorAlf
2 жыл бұрын
Thanks, will do! cheers
Ran into your vid Definitely the dyna 2017 has it always not turning over right after a long ride till it cools off for like 20 minutes getting an oil cooling system for this problem hope it works cheereos
@RevelatorAlf
3 жыл бұрын
Cheers
@billgonzales8978
3 жыл бұрын
those twin cam motors were nothing but problems
Nice!! Thanks for the info.
Very informative mate!
@RevelatorAlf
3 жыл бұрын
Thanks
loved it on my triglide when i had it. not on my 07 FLHRC
@RevelatorAlf
2 жыл бұрын
ok cheers
Hey thanks!
Super information
I just put two car electric fans on both sides opposing each other...never had a problem since although Now I need to carry around a car battery!
@RevelatorAlf
4 жыл бұрын
Ha ha I bet
Nice video thank you Alf. I’ve seen it on Indian bikes and I was wondering why harley’s doesn’t have this feature
@RevelatorAlf
2 жыл бұрын
Cheers
System is for riders comfort (heat production). Nothing to do with overheating second cylinder.
Yep with respect the title is misleading, EITMS won't stop your harley from overheating, it kicks in when oil and engine temps are already too high and it doesn't bring them back to optimal (seems aimed at rider comfort). Only real options are fans on the engine and oil cooler. It's ridiculous, decades of big twins roasting in traffic and still no fan-assisted coolers for the new softails as standard (and only aftermarket option is mounting an additional cooler for $550+!)
Agradecido pela informação. Thanks about information.
@RevelatorAlf
4 жыл бұрын
You’re welcome cheers
Great Info Brother.
@RevelatorAlf
3 жыл бұрын
Thanks so much
Hi Which O2 sensor should I buy for my FXSB Breakout 2014 Denniskirk is claiming theirs better from oem as they are made with ceramic body made of stabilised zirconian dioxide, surface coated with gasspermeable platinum electrodes & porous ceramic help erosion due to contamination particles in exhausts
Great content
@RevelatorAlf
Жыл бұрын
Cheers
I keep midgets in my panniers to jump out and fan the engine. Skills.
@RevelatorAlf
5 жыл бұрын
Ha ha perfect. I need to get some
Harley davidson developed a system to prevent overheating in my mid 90's EVO motor. It's called MAKING NO POWER!!
I have a 2002 Road King Screamin' Eagle CVO and don't have an Owner's Manual, anyone know if there is a LIST of which MODEL YEAR bikes have the EITMS feature? Mine was running 277 degrees on a trip between Pahrump and Las Vegas, NV yesterday with myself and my wife. Air Temp outside was 70 degrees, way cooler than our Summer temps of 120 degrees.
I wonder if the 2012 Nightster sportsters have this feature
Anyone who knows... I BBQ a lot and have a digital thermometer... I am willing to carry it in my bag on my 2002 Road King SE CVO to check engine and head temps if that is an accurate and viable way to make sure nothing cracks... I would hope my $450 DynoTUNE Power Vision is giving me the correct temp, but would the digital thermometer confirm, I am thinking it would. (Not a Harley Guy, I just own and ride one. I don't own a single Harley patch or logo if it is not attached to the bike. Just not my gig!)
New M8 doesn't overheat does it ? Just turn it off.
@RevelatorAlf
3 жыл бұрын
errm yes they do
Wonder why so many Harley haters watch Harley videos? Checked my owners manuals, my 08 Ultra has this, my 07 Dyna does not. Thanks, I would never had known to look for it.......hope it still works, not being used for 13yrs
@RevelatorAlf
3 жыл бұрын
Thanks so much. Cheers
Brilliant thanks so much for the hint! Maybe I’m missing something but is there a draw back for to not not having this feature enabled?
@RevelatorAlf
5 жыл бұрын
I would only say if you’re riding in hotter temperatures but otherwise it should be fine. There isn’t a performance reduction with having it enabled so it’s really a personal choice I suppose. Cheers
@rodzimmerman1979
3 жыл бұрын
@@RevelatorAlf If you have a big cam with a choppy idle when EITMS activates the bike sounds like a Honda 90 so many owners don't like that.
I keep mine off all the time....If you notice, when it is enabled the motorcycle idles up and down and rough...Just me.
@joshuaquaid2346
3 жыл бұрын
For the better though
does 2003 Road King Classic FI ( FLHRCI) have this feature?
Will it stay green if its activated or will it turn green momentarily then go back to amber
Actually this feature isnt for overheating..its there to help with heat transfer to the rider.i mean it will probably help but not its intended purpose
I had this on my 2010 police roadking ,I have the 2020 streetbob now,and I must have it cause when I’m sitting at lights I can hear the back cylinder shut down,and was worried my engine was bad
@RevelatorAlf
4 жыл бұрын
Yep, should be normal action. Cheers
@shadowman5088
4 жыл бұрын
I checked,I have it! Thanks for the vid ,I was concerned
Does this work on a FXDR?
Thanks for this video; which models have this feature / I have a 2019 breakout Ill get this week, I wonder if it has it;
@RevelatorAlf
4 жыл бұрын
Yes it will have it. Cheers
@tma4137
4 жыл бұрын
RevelatorAlf would my 05 dyna super glide have it? It's fuel injection
Does this work on 2011 CVO street glide
@RevelatorAlf
Жыл бұрын
not sure
so how does this help the front cylinder? That 1 is still generating heat.
@RevelatorAlf
4 жыл бұрын
It won’t. But the front cyclised is generally cooler and will be cooled more by oncoming air flow. The rear cylinder is almost in its own shell so get even hotter
@Boobtube.
4 жыл бұрын
@@RevelatorAlf ok, makes sense.
Can this be done while the motor is running,and also is this enabled from the showroom? Good info,think you can alter the temperature of this system through the V&H FP3.
@RevelatorAlf
5 жыл бұрын
Thanks Philip. Yes I'm quite sure you can do this whilst the engine is running too. I'm not sure however if this is enabled as standard from the showroom, however my bike had it already enabled. Perhaps there might be some adjustment in the FP3 however I'm really not sure, however it would be good to know whether the FP3 in anyway affects the EITMS activation parameters. Cheers
Does the engine have to be in neutral and clutch disengage for it to work? Or will it work with the clutch pull in and still in gear?
@RevelatorAlf
3 жыл бұрын
not that I am aware of
It idle really weird
Is it possible to lower the idle rpm for a harley davidson street 750 ? Ty
@RevelatorAlf
3 жыл бұрын
Have you gone back to the H-D dealer to ask for advice?
I have a question I have a iron 883 I had just put some slip on pipes do I need needa tune it and wil it overheat
@RevelatorAlf
2 жыл бұрын
I would say not totally necessary as long as the air filter is still standard but it also depends what kind of exhaust you have put on and how that affects the back pressure. If the bike doesn't sound or feel right then your best option would be to tune it, cheers
@adrianlopez8796
2 жыл бұрын
@@RevelatorAlf thank you 😊
Bro plz help me problem karizma ZMR OverHiting
@RevelatorAlf
3 жыл бұрын
not sure what could be wrong with your Hero, but it could be a number of things
hey man there is a 2013 883 sportster for sale which had the engine temperature sensor removed for a few months, and the bike runs with a rich fuel mixture now. Is it safe to buy this bike? thanks mate
@RevelatorAlf
3 жыл бұрын
I would get that fixed really. Cheers
While this feature is enabled , is it safe to do highway speeds ?? Or is this strictly for traffic flow
@RevelatorAlf
2 жыл бұрын
It's perfectly fine. cheers
Is there a way to check which bikes have an EITMS system on a harley's website?
@RevelatorAlf
4 жыл бұрын
Not sure. All Softails and tourers have it but not sure if there is a search option
@billgonzales8978
3 жыл бұрын
buy and older harley dont buy this new problem Harley
Fan.
@RevelatorAlf
3 жыл бұрын
Cheers
Hey guys! Would this cause my bike to shut off randomly while riding, backfire, and my speedometer goes crazy. Sometimes revs on its own with clutch in and high idles any gear. It runs amazing when this isn’t happening. Thought I fixed it today, rode it for 30 minutes and it shut off 2 times, revd with clutch in 2 and backfired once. Thanks guys I can’t figure this one out
@RBoysMedia
3 жыл бұрын
If it was faulty of course
@RevelatorAlf
3 жыл бұрын
Hmm that’s an interesting one. This sounds like a sensor issue messing with your ECM. Ha e you checked for error codes?
@RBoysMedia
3 жыл бұрын
@@RevelatorAlf haven’t used a scanner, don’t have one. But there is no engine light coming on. Bike runs great. Every once and awhile it will randomly do one of the problems. Seems completely random. I tried cleaning my map sensor so I don’t think that’s the issue. This is my last guess
@RBoysMedia
3 жыл бұрын
I really appreciate the reply. Thank you so much
@RevelatorAlf
3 жыл бұрын
What bike is it by the way?
Does anybody have any idea what temp it should activate on a twin cam Softail deluxe? My V&H FP3 has it set at 310degrees which seems to high according to my testicles which are being boiled. The bike has a Stage 1 and a Stage 3 and running Samson true duals. Not sure it was this hot before i changed the pipes and added the FP3.
@RevelatorAlf
3 жыл бұрын
Sorry can’t help you there
@billgonzales8978
3 жыл бұрын
OIL cooler helps alot?
@MrJnrc
3 жыл бұрын
Bike was running too lean. I took the bike to a dyno specialist and he reprogrammed the FP3 map as it was way too lean. Might change the FP3 to a power commander 5 and have it dyno tuned. V&H have no idea how to map bikes period. That’s my personal experience with them. I’m sure others have had better luck.
It doesnt protect the bike..... It's for rider comfort.
Not on a 07 roadking. Sigh
@RevelatorAlf
2 жыл бұрын
Ah ok cheers
1.use water cooled ultra limited 2.use fan cooled 3.water cooled conversion(never seen one) 4.just use foggy 5.use another bike brand...that have water cooled.... Lol
@RevelatorAlf
3 жыл бұрын
ok
This is nothing new my 2013 FLHTK has this
@RevelatorAlf
3 жыл бұрын
You’re right. This is nothing new
Funny when non harley riders talk about us blipping the engine at stop lights. There is a reason for that. But of course these idiots think its for show. Which it is but theres 2 other reasons for it also. Heres 1 of them and the other is for when you launch it catches.
@RevelatorAlf
3 жыл бұрын
yes indeed ha ha
wanna know an easy solution? Long red light? Just sitting? SHUT THE MOTOR OFF. Start it back up when you can move again. Anyone who owns an Evo shovel panhead or iron sporty knows this.
@amungus76
3 жыл бұрын
I find this truely amazing that Harley decides to keep engine cool by shutting off half of the engine! Other engineering companies just add water cooling system! This is old long time issue. Over heated motors have always been an issue for the life of motors but Harley has fought until recently just getting into the 20 century engineering. Still hard not to luv em.
Buy a water cooled one...
Why doesn't Harley Davidson make thier bikes water-cooled and cut out all this gamble?
@RevelatorAlf
2 жыл бұрын
they do now on some
If you're on a motorcycle......how do you end up in stationery traffic? 🤣 This isn't the states, we can split any lane we want 😃
Dam just make them liquid cooled
@RevelatorAlf
3 жыл бұрын
Well a lot of people would agree
@26johnbeat
3 жыл бұрын
@@RevelatorAlf that's why I don't ride American made no more im pro suzuki liquid cooled I love to here my cooling fan come on in traffic
@jake66
3 жыл бұрын
They are liquid (oil) cooled heads
@26johnbeat
3 жыл бұрын
Me tooooooooooo lol
put a radiator on it, problem solved
@RevelatorAlf
3 жыл бұрын
Ha ha
Its been proven this feature is pretty much useless.
Stop your Harley from overheating in traffic! Trade it for a BMW.
@RevelatorAlf
3 жыл бұрын
ha ha there's always that
@jake66
3 жыл бұрын
Never.
@billgonzales8978
3 жыл бұрын
Germans make the best of everything, period. A German bomb maker helped us beat japan in war, German rocket maker put our man on the moon, nuf said. no im not german
@RealSuperRando
2 жыл бұрын
…along with your balls.
Ай бұрын
Piss off
ive owned 7 Harleys bought them used never had heat problems with them, these new harleys with all the new crap are garbage they are not for my crowd we stick with carberators not fuel injected crap, not for me
@RevelatorAlf
3 жыл бұрын
Horse for courses for sure
I know I'd pay 40k for a motorcycle that can't cool itself with out farting out the back cylinder. Harley is a joke!
@RevelatorAlf
2 жыл бұрын
Ha ha
Harley sucks in India overpriced piece of crap metal RE is far more better
@RevelatorAlf
4 жыл бұрын
Ha ha so you’re a Hero rider then are you?
@SouravAcharya9444
4 жыл бұрын
@@RevelatorAlf Hero rider ??????
@SouravAcharya9444
4 жыл бұрын
@@RevelatorAlf i just hate Harley in India because they r fuking overprice & they dont give a fuk to there customers, what i think of Harley they r just expensive piece of crap & there just there where RE comes & RE is great
Just don't ride harley. If your bike can't handle a bit of stop n go traffic you know it's a piece of crap.
@RevelatorAlf
2 жыл бұрын
Well…perhaps
2022 iron 883 ??
Is it possible to lower the idle rpm for a harley davidson street 750 ? Ty
@RevelatorAlf
3 жыл бұрын
There should be a way but you'll have to speak to someone who has specific knowledge about the 750. Cheers