Was struggling for 20 min. Then I came to KZread university.... lifesaver

This is an excellent video for newer chain saws, but ones that do not have the decompression valve are more difficult to crank! :-) Good video!

I went to my dealer and he informed me that I was not able to start my chainsaw because I hand not obtained the PhD in chainsaw starting required by this particular company as opposed to every other company that has a 2 or 3-step starting procedure.

@anthonymiller7210

3 жыл бұрын

Can you adjust the bar oiler

@robbiejk9613

2 жыл бұрын

@@anthonymiller7210 Nope! These chainsaw leak bar oil like a sieve!

@mike1968442

2 жыл бұрын

No joke!

@jerryprather3914

2 ай бұрын

Why do I own a chainsaw I can't start?

@roechambeau8420

17 күн бұрын

​@@jerryprather3914 you and everyone else who bought a husqvarna

Feel so silly that I had to come here and watch the video but it actually worked! Has the same 455 but the AU version and was about to take it back as I couldn't get it going after showing shop. God send you are!

@mtadams2009

3 жыл бұрын

Don't feel bad your not alone.

Thanks for this video !!

THANK YOU!! Very good video that covers the nuances of starting these chainsaws. (Dirt bikes are a lot different, and I was leaving the choke on based on my experience with them).

@rubio66, Same thing happened to me with a 350. Looking for a video now. Did you find any other info?

I’ve had various chainsaws over the years. Usually the more affordable work horse American brands. I was really excited to buy this chainsaw. It has done nothing but give me problems! I do everything correctly. Have it tuned up and checked out regularly. But I have to say… I hate my chainsaw!

@TheDennys21

3 жыл бұрын

Modern Husqvarna and Stihl entry level and mid-range chainsaws are made in China, only the the pro saws are made in Sweden and Germany but those are crazy expensive, if you want a reliable saw you go with Echo, even the cheapest saw they make is quality because they are made in Japan.

@jostearns3824

Жыл бұрын

I agree! If I can start it once I turn it off then it cannot be restarted until Otis absolutely cool! I wish I never bought it.

@rubio66 I have had the same problem. I purchased an E series 235, the first saw would not start at all, then I got a second saw of the same model and the saw started once and would never start again. Not sure what the problem was, I just gave up on that brand and entirely.

@EustisRider I have a 20 year-old Stihl MS 260 Farm Boss. Once it's warm you can start it in one good pull even after 15-20min...awesome quality. Nothing against Husqvarna though, used several of their saws and hey always did their job ok. I prefer Stihl by price and looks, mostly.

New Husquvarna C236 arrived this morning and after assembly and complete pre-start duties, the machine would not start, not even a brief fart. Removed the top cover and fitted a neon timing light in lieu of the spark plug. Only with the plug removed would the timing light show output from the ignition module, and that was with a rotation speed that would be impossible to achieve with the plug in place. Perhaps the final check in the PRC does not involve a test run?

husky start steps, online are very helpful, If all else fails, try lowe's are home depot rental store, one of these fellows may help you start saw for free, if they can't start it take it to a saw shop.

What could stop the Starter cord from pulling smoothly to the end of the cord -- if a spark plug is installed. It pulls normally if I remove the spark plug? My saw does not have a decompression button. The ultimate problem is that the Chainsaw will not start. I believe that is because the cord does not turn the flywheel far enough to create a spark.

I’m going to attempt starting mine today I was wondering if you take the recoil starter off and use a cordless drill with the appropriate socket for the crankshaft could you turn it into electric start 🤔

@rogergibson5172

2 жыл бұрын

Unofficial way of starting a bad starting saw if it's been standing for a while is to remove the spark plug and shoot a small drop(6-10 drips)of petrol lighter fluid straight into the cylinder,replace the plug and pull!Also make sure you fill with fresh fuel as petrol goes stale after a while 🤗

Cool, I learned

I wouldn't expect to have anyone to be happy with their Husqvarna saw on this video thread because most likely if your here its because you can't get your saw started...lol

@jpuckett5580

8 жыл бұрын

+Ryan96se YYUUPP!

@Hank520Tube

7 жыл бұрын

Ryan, you said it all. Just wish I had seen this site and your comment prior to....2 stroke? no stroke is more like it.

@markb8954

6 жыл бұрын

Yep...I agree. I get so frustrated with my saw when it won’t start....especially when I have trees laying down following snow or windstorms and the damn thing won’t start. Tree services cost an arm and a leg, looking to upgrade to something reliable.

@petepistachio8229

4 жыл бұрын

Great. Hope mine starts. Haven’t used it since Sandy. I ran it dry. So we will see. I was watching just to familiarize myself with the unit.

@HangsLopsided

4 жыл бұрын

Ryan, glad to see you here.

As advertised and delivered on time.

Thanks Husqvarna!

My 288XPW is 23 yrs old & starts with 2-3 pulls cold,1 pull warm every time.You definitely need to use the decompression valve when cold starting though,with 175 lbs+ compression it'll practically throw your shoulder out otherwise. I cant see how their smaller saws would even need a decomp button.With all the starting problems most of their new smaller homeowner saws have,you'd be better off buying one of their older small/mid sized pro saws used from a trusted seller for less cash.

On the Internet everything is working 😂😂

Well, this looks like ritual for me. I have an electric chainsaw and thinking to buy a gas chainsaw. Didn't know there are so many steps:)

very nice

I have an older 350 model purchased in 2001 or 02 and I have had issues starting it ever since. Once its running its fine but starting it is another issue. I have had it serviced a couple of times and nothing has ever really fixed the issue.

Take heed on the tip of setting the fast idle, cold or hot. These homeowner Husky's love to start on fast idle.

So, when they don't start, what do you do? Mine is around 3 yrs old, and has a total run time around 10 hrs - and gives no 'burp' of trying to start. It has not been abused - oh, and it leaks all the bar oil out into the case whenever it sits.

Someone should come up with a push button starter. I have the hardest time to start a chain saw, the wife says my arm is to short. according to her that's not all to short.. What can I say I am a old man and short.

Had a husq for 5yrs laid on the shelf used a little echo worked great finally got the energy to screw around with the husq finally got it started she peeters out when ready to cut tried to check the plug needed a5 ft bar what a joke its easer to start the engine on a DC3.

All the safety devices are there to keep your limbs intact. A family friend of mine was in a tree cutting branches off when he nearly cut his leg off, this was in the mid-late 1980s. He never used his chainsaw again after that. He didn't make contact with his leg, but it was so close he decided to get rid of it.

@Canopus68

3 жыл бұрын

I don't understand why people don't wear safety gear. I dinged up my knee with a saw--only about 10 stitches. People tell my I should have been wearing chaps. I agree, but the problem is they hadn't been invented or at least we hadn't heard about them yet. We're talking 1969. My first cord wood saw was a Stihl 030. It was still running up to a few years ago when my son dropped a tree on it.

I bought my Husqvarna 460 Rancher already well-used. If I follow all of the steps in this vid for cold and warm starts, it starts every time. Just now, I started mine up after about 2 years of sitting with ethanol fuel in it. I mixed some fresh ethanol free and replaced the old fuel with it first, mind you. It took, maybe 4 pulls on choke. Sometimes you have to clean the plug a bit and all the usual, more frequent maintenance you should expect with small engines plus chain sharpening, but it's a great quality product. There's a reason Poulan began making their chainsaws orange recently (they gave green a bad rep). When I saw that they had done this, I also noticed that all the orange Poulan displays on the shelf were used chainsaws that the store must have received as returns.

@lowes

7 жыл бұрын

Glad yours is still running well!

@RefinerSimilitude

7 жыл бұрын

Thanks for this great video. I come back to it to refresh every time I start my saw for the first time of the season.

@captainconner4060

7 жыл бұрын

Husqvarna bought out Poulan, hence is where Poulan Pro line came from... ALL Saw manufactures have a low-end.. or "home owner" saw, not meant for heavy use. Poulan and Husqys under $300 fall in this "occasional light use" The 460 is technically a Professional Saw, classed in the "intermediate" category of saws. I too have a 460, which out performs my dads stilh MS362. If your experienced enough, 24" bars or larger, are very robust with a skip sequence chain i.e. Oregon 72JPX084G (for 24" bar") will cut very fast. If you dont have a lot of time knowledge and experience behind a saw, Use regular sequence chain until you are comfortable with the saw and have learned its likes and dislikes. and Learn how to prevent and react to kickback. All new saws come with low kickback safety chain, to help protect novice users. Skip chisel chain is more apt to kick back potential, it is not completely avoidable. However if your experienced use a skip chisel chain, that 460 will come alive. Be safe.

@williamphillips8328

6 жыл бұрын

cutting stumps with a chainsaw

This saw has been nothing but a nightmare since the day I have owned it. I have had two different shops look at it, still getting it started is a miracle. I need to move on from this piece of crap. Once running its fine, I have never understood why its so hard to start. I have found that moving the blue choke-fast idle critical to keeping it going once its warmed up. The instructions in this video have been helpful, thank you.

@markweber1807

2 жыл бұрын

You have to pull the choke out and then put it in before you start EVERYTIME. Whether you need it or not, that's one trick I've learned.

@mtadams2009

2 жыл бұрын

@@markweber1807 Thanks

@markweber1807

2 жыл бұрын

@@mtadams2009 Hope it works for you Scott, let me know

@mtadams2009

2 жыл бұрын

@@markweber1807 I will, again thanks

А модель какая?

Have had a 440 X-torq for 5 years , sat since June 2016 started on 2nd pull February 26 2017

pull cord until you feel a resistance ok.....? well what if your cord barley has any resistance? I can't get this dang thing to start and its brand new a day old.

@joeseaver2596

6 жыл бұрын

Was there no compression? I just got one cheap cause it's not running. I think it has no compression. I'm planning on taking it in to get serviced.

@babayaga3895

5 жыл бұрын

Maybe you got it where i bought mine, you buy them as new but are not, then you realize they may have wiped them off but thats it. Thus they insist on putting gas mixture in and bar oil. Ha ha

As soon I squeeze the gas to get it off a high idle it dies, any ideas?

I have a question about this product, is it wrong/beneficial to store with choke on? Please explain?

Just bought a brand new Husqvarna 455e. Unboxed and followed the starting instructions to the letter. Still can't figure out why this chain saw will not start. I have been using chain saws for 30 years, mostly Stihl and I clearly got spoiled by chain saws that simply start. I will try and figure this Husqvarna out tomorrow and if it still will not start - back it goes. So much for all the reviews that say how easily Husqvarna saws start lol.

We have a 6 year old husqvarna 340 and never had any starting problems... even in -25 goes easily with 2-3 pulls and 1 pull warm.

@Beca2702

Жыл бұрын

Try to start it warm with one pull to +37C...

You will notice here that everyone complaining that their saw won't start does not say anything about what they did to fix the problem except go back to Lowes. Most people who know their saws would try to diagnose & fix it at least to the point of spark or fuel problems. But if you can't do that, then the next best thing is to show everyone how little you know about chainsaw repairs.

@cobhc1986

7 жыл бұрын

I bought a little Husqvarna 235e (crappy little saw I know but I needed a small saw for lighter jobs) from a guy on craigslist for $75. He included the original box and paperwork where he had sent it back to Lowes for repair. It was hard to start, bogged when you gave it more throttle and wouldn't idle. Adjusted the carb and it runs fine now. I also noticed the oil pump wasn't working, I doubt the previous owner even noticed that. That wasn't hard or expensive to replace either.

@timjbolchoz

6 жыл бұрын

F*ck you. Do you really believe everyone here is using a chainsaw for the first time? Most of us have had other saws; most of us have read the directions; many of us have watched the video but we still have problems. Are you just smarter than we are or just luckier?

@HoneyBeagle

5 жыл бұрын

Shouldn't have to fix a new saw and honestly I've had several 10-20 year old stihls and every one of them would start cold in 3 or 4 pulls every time

@daleworden189

5 жыл бұрын

Why the Fu@k would you want to spend time trying to repair a brand new chainsaw. Hero saw man!

What if the chain saw does not have decompression bulb ? What other procedure can be performed to decompress?

@stevew4117

Жыл бұрын

I have one of those as well. No option available. Usually smaller engine so less pull required. We just have to work with what we have. Still smaller saws don't need one.

why does mine only start with the decompression button not pushed in???

These are excellent saws! And at a bargain price. I would buy from a Husky dealer tho not Lowes

i have got a Husqvarna 465 for 8 years and now i know how to start the thing thank you .but my right arm is 5 inches longer than my left arm

Wanted a stihl but was told this was the better saw. Have had it eight months and wish I had bought a comparable Stihl. Wouldn't start today so used my twenty-year-old Stihl. Went right through twenty two-inch hickory. Two hours later still won't start. A slow revving saw when it runs. Into the shop. Fortunately I have another older Stihl that start all the time. Perhaps it is the new emission standards screwing it up.

Had a super reliable Poulson but it got stolen. Decided to 'Upgrade' to a Husqvarna and the only thing it has done is give me an arm workout. Hasn't started even once. It's going back to Lowes come Monday.

In my experience, those decompression valves combined with the choke lead to hopelessly flooded saws if the weather is anywhere above 40 degrees or so.

The correct way should put right foot on the other side (board side) of the handle, hold the top bar with right hand, and pull the starting string with left hand. This way the right foot with right hand provide a firm grasp of the saw to pull the starting string.

@20v552

2 жыл бұрын

Bro dont correct husqvarna Their chainsaw, their way

So if I've used it three times, and it no longer starts, is it just old and worn out?

@WarrenPostma

3 жыл бұрын

If its brand new its already trash

Lol ya my jonsered ( basically a Husqvarna) never starts this easy. Runs like an animal once you get it going but doesn't start anywhere near as easy as any Stihl saw I've ever had. Not knocking it but it's not the easiest saw to start cold. Once it's warm it's a one pull machine though

Ah, the good old days of real search engines when you typed in "how to start husqvarna 240 chainsaw" you actually got results for "how to start husqvarna 240 chainsaw".

@lowes

7 жыл бұрын

CazzoPORTICO Scimmie here's a link to the product on Lowes.com: low.es/2nynMI2. You can download an operating guide under the "Guides & Documents" section. Hope this helps.

that crap. i dont have air purge. what need i do ??

do they know that everyone drop starts there saws

I could never get mine started. I have bought cheap saws this whole time and they lasted for years and years. Well, I had a little more change in my pocket and decided to go with a name brand. It is hit or miss I guess, but a pain in the butt. I have a friend who owns a lawn business and he can't get the thing started. So now I have to go through hoops to get this defective item exchanged. Hopefully the next one will start...when I get it in a few months.

I have a husqvarna 545 mark 2 and I spend more time pulling on it than it running, so much trouble starting, might try spraying some either in it, husqvarna is junk.

The model I bought does not have a decompression valve. It’s impossible to start. Going back to dealer as unfit for purpose,

I have no issue starting my saw , 2nd pull every time! People need to read info also use 93 octane and stable gas additive!

@captainconner4060

7 жыл бұрын

Same here, 92 or 93 octane only, and JASO FD and or ISO GD rated 2 cycle mix., I use Lucas Safeguard.. Lucas 2 cycle etc. ... mine starts cold or hot, 1 pull every time. I also.. even when not using my saws, I start them at a minimum of once a week and idle them for 1 to 3 minuets.

@rickmerrill8647

6 жыл бұрын

I have never heard of using 93 octane - is that in the manual?

@theoriginaljoeschmoe5987

6 жыл бұрын

Rick Merrill You’re not supposed to run ethanol through any small, carbureted engine unless it’s specifically rejetted for its used. Otherwise, 93 octane MINimum.

@rickmerrill8647

6 жыл бұрын

I have been using "tru fuel" at 40:1 for several years. 93 octane I have not done. Thanks Joe.

@rickmerrill8647

5 жыл бұрын

TrueFuel happens to be 92 octane, and that is what I use.

At the start of the video the narrator says, "Push the chain brake forward". However, he is then seen to pull the chain brake back! With my new Husqvarna 135 (which will not even splutter) that wouldrelease the chain brake. Is it different in the USA?

@kbt5273

9 жыл бұрын

Graham Boyd the chain break is on at that part of the video. He deactivated it by pulling it back an then reactivates it by pushing it forward with the back of his hand.

@N8_Digitty

7 жыл бұрын

manual chainsaw sharpening

I have a new Husquvarna which i have used about 10 times since june 2013 it takes about 7 pulls to start each time even if i stop the saw and then try to start it straight away its a hassell to start again any ideas anyone?

@captainconner4060

7 жыл бұрын

hard starting,,, check low speed card adjustment... prolly needs to be turned out ever slightly..

Is it normal, when i push the handguard forward, there is a loud cluck? So this confuse me a lil bit, cause i'm not sure, if i break something 🤔

@jrgenrasmussen8840

4 жыл бұрын

It wont break . It stops the chain from running

@jorkins5

4 жыл бұрын

@@jrgenrasmussen8840 the chainsaw is not running and make this "cluck"

@jrgenrasmussen8840

4 жыл бұрын

@@jorkins5 yes tth clonk sound is the brake ingages it is buildt to last for years My old one is 15 years old now and still running.

I like mine

just had a 47 second nonskipable youtube advert on saving the planet

@DactylicTomb

Ай бұрын

get BRAVE bro!

Instructions unclear. I accidentally cut my metal gate. Now it has a scratch.

We bought one of these and we have spent more time "trying to start it" then we have ever spent actually cutting wood with it. Our model doesn't have an air discharge bulb but other than that it looks the same. This was the worst investment we ever made. I like how they say in the video to push the chain brake forward (but he pulls it back into engage chain mode). I am going shopping.

@timjbolchoz

6 жыл бұрын

I save $80 by not buying another Stihl saw. What a bad decision.

@rickmerrill8647

6 жыл бұрын

Yes I noticed he pulled it then pushed it - this is really a video production issue;-)

@ruudvandeleensel9488

5 жыл бұрын

+1 problems, problems and problems with Husqvarna 435

damn. i shouldve watched this 6 months ago.

I didn't need to step on it or have Popeye arms to start my Homelite. A piece of- yes, but got the job done. Pull starting this thing tires me out before I start cutting.

👌👍

My 350 Husqvarna has no Prime pump and the saw has been sitting for a long time unused I now Cannot start it

Wait, I watched this twice from the beginning. When was the throttle lock put on?????

Is that where this chainsaw was made? In China? I can't get the damm thing to start.....pffffffftttttt......

That was a surprise to me...are you really supposed to mix gas and 2-cycle oil together, literally, as in, the same container?

@JenkinsStevenD

3 жыл бұрын

Yes. Or you can buy the premix fuel.

I've owned my new Husqvarna 440 for 10 days now and so far not been able to start it. Wishing I'd gone with an alternative brand

@Boost_Addict

3 жыл бұрын

use pre mix 50:1 gas you prolly mixed gas wrong. Its the the brand its the user. I got a 450 rancher and fires in 2 pulls. Trick? New fuel filter / lines and spark plug and VP pre mix . 50:1

i agree, but i feel as though the reason they have not already made them easier to operate is because they don't want for someone under qualified to use the device. (such as a child)

Sort of having trouble starting my 440e. My Chinese chainsaw starts right up all the time.

"Starting and stopping your Husqvarna Chainsaw is a simple process." ... yeah ok. Everyone of these I've used takes forever to start.

@jamesmichaelgabriel4439

7 жыл бұрын

Elhanan kje.

@timjbolchoz

6 жыл бұрын

You're right about that. I bought this saw to save a little money not realizing it wouldn't start. Feel like throwing it in the dump.

@HoneyBeagle

5 жыл бұрын

I'll take any saw you wanna throw in the dump!

@ArtistryInWood1

4 жыл бұрын

@JEFFREY BRESNAHAN I have got one it starts easy and has done loads of work I am pleased with it maybe I have been lucky

@ArtistryInWood1

4 жыл бұрын

@JEFFREY BRESNAHAN I also have a 372 XP with 28" Bar that never gives me any trouble Better to be lucky than rich LOL

how is that Chinese?

Same for me. Just bought it today, new. It won't freaking start.

If only it were that easy...

I bought this chainsaw yesterday. I've tried to start it 5 times now, giving up each time. I can't believe it can be so difficult to start. I've followed the instructions and watched the guy at the shop start it. Don't buy this chainsaw unless you have a degree in motor mechanics.

@CriscosCountrylife

4 жыл бұрын

Frelsi Truth👍💯

@gabrielgustin786

4 жыл бұрын

Ok

I've bought a Husquarna chainsaw 41 series about 6 years ago, I let me tell you this saws are the biggest piece of crap I've ever seen. The only thing that can get my saw running each and every time is a complete tear down and re-assembly of the carb and a fresh plug. Each time after use, I rum the saw out of gas, however a week later I can pull the rope a hundred times without it wanting to start. Buy a cheap big bow saw, at least they start every time!!!

@HoneyBeagle

5 жыл бұрын

If you can get ethanol free fuel where you live that will help a lot. I still think Husqvarna's are hard starting so don't think I'm making an excuse I just had the same issues you are having on my garden tractor until I switched to ethanol free fuel. Every time I went to run it I'd have to tear the carb down it was a huge pain in the butt

@wollywolly2734

5 жыл бұрын

I have 5 Husqvarna: three 455 a 450, and a 141. The 141 I got today at auction for 40 bucks. Filth ey girl she was. Gas was mud oil was water sludge. Gave her better than a hookers bath flushed all tanks and would you believe the 99 year model saw was like new? She fired perfect on 93 octain. I mean bam she started. All my saws have started easy except on one occasion on one of the 455...not sure why but the issue went away. I was cutting way above average. No artificial heat in the house for 5 years ..two stove. I love the Husqvarna brand

141 Husqvarna doesn't have primer bulb or the top button just have choke pull out that's it...

The guy in the video sounds like the Poulan Pro guy as well. Then I realized they are the same manufacturer.

Lol... You guys that are complaining it will not start, know nothing about the saw! I have had Husky and Stihl products for years, in a tree service. Husky may be hard to start UNTIL, you learn the saw, how to use the darn thing. It is easy as heck. They will fire right up every time. They cut through wood like its butter. You got to know how to maintain and USE the saw. Until you understand the saw, you wasting your time. I have models 235 and a 450, which are OLD ones. Hell I have had that 235 for over 10 years, the 450 about 8. BOTH, start right up and STILL cut like razor's. In comparison to Sthil products, Husky's cut a little faster, and do not lose compression when you turn it sideways. In other words, the 450 is GREAT for dropping and felling medium size trees. That 235 is limber if I ever had one, just zips right through branches that are small or medium small. Those are the only 2 saws, I let no one touch other than myself. As for the guy that said if you buy a Husky, you are getting a Poulan, BALONEY! Poulan is FRENCH, Husky is NOT. Poulan is probably one of the most dangerous saws produced. You better off using a weed-wacker. That saw had so many different ways that you could injure yourself it was ridiculous. I think they are made in China now...not dependable. Also, the person in the video IS engaging the chain brake. You see him flick his wrist and it moves forward! Duh!! I wonder...how many have put some serious hours on chain saws...because if you have, you would know, this is a dependable product that will last you forever if you take care of it.

@dawg1982

6 жыл бұрын

Just spent 9 hours today with my 450 dropping some big dead doug firs, de-liming , and cutting 16" sections. damn I love that Saw. Starts up everytime. No issues and she comes with her own quirks so I'm the only one that can start er up right away. It might be love. I wouldn't care what most of these people on here say about chainsaws. They don't even know the difference between jumping a tree and dropping a tree. I've watched my buddies jump really small trees in their back yards when it could have been an easy drop just because they watched me jump a big one to clear some distance. Truth is none of them can make a living dropping trees and if they tried they would be the only guys out their without a Stihl or Husqvarna. They'd also be going through chainsaws every few months as well if they get lucky and have the saws last that long.

@MrZootalores

6 жыл бұрын

i just picked up an old Husky 44 at the dump today; covered in grease,dust & dog fur-it had been neglected for years.Probably because it was "hard to start". Unlike other saws, the recoil pull needs to be pulled up to compression then a short pull & off! All i had to do was dump old gas out, clean the plug & air filter & "aeriate" by pulling recoil cord a few times, let her sit for a minutes to evaporate last nasty old gas. Fresh gas & she was off; lubed the linkage 'cause the trigger was sticking. I've since cleaned her up a bit, she's a beauty! i still chuckle at my good fortune; when i step outdoors for a smoke, i start her up again. It's sounding better & better-love that old saw!

guy with the no start husky saw, have it checked at a saw shop, saw may be bad, are you are doing something wrong?, god forgive" I'm sure you have a lot of money in it have it checked. The most they may is maybe 30.00 dollars? I have had a 460 ranger for 4 years now , it kicks ass, put a sthil rapid cut chain on the husky bar, and you will be amazed how it cut's.

if you bought a husqvarna at Lowes you bought a poulan

@timjbolchoz

6 жыл бұрын

Yea and Poulans are sh*t.

this chainsaw sucks, never started again. bought it last year.. used it 5 minutes.. that was it for this thing. changed spark plug.. gas.. everything.. i pray God destroys all these crap chainsaws..

@hillbillymyers5236

4 жыл бұрын

true

HA the problem with starting is not the first round it is starting the second time...lol

Echos are easy to start.

I don't know but it looks to me like he doesn't know forward from backwards.

I used my new Husqvarna 236 for the first time today on a light job. I stopped for a break, checked fuel, chain lubricant + tension. Since then I haven't been able to start it. I've tried the various troubleshooting procedures, followed up on tips... Nothing. I'm stumped. This is new today and I've put it away with the job half completed, thinking about taking it back to the dealer already - which I loath to do at this stage. Anyone with any ideas, please let me know. Many thanks!

Cold starting problem is way more of a task than they lead on to be. I wouldn''t buy another. Maybe its the 10% ethanol gas that seems to be mandated in our gas but the product should handle that. Shame,... I had a lot of work to do and now I can't do it.

I've never been able to start my brand new Husqvarna chainsaw. Have had it to the repair shop twice still doesn't start. Always brand new fresh gas, new plug

I have a Husky 435 - same thing - horrible to start. And 5-6 pumps?? You'll be pulling the plug and drying it out. There should be a recall on these things. I'll never buy Husqvarna again. My old 266 is easier to start.

Best way to start it is to buy a different brand. Spend the money and buy a Stihl. I have the Husqvarna 440 and it’s a POS. Good luck getting it to start.

@craigresnick9248

2 жыл бұрын

Best way to start it is to buy a battery operated chainsaw

i cant make it work !!!!!

Ive run both stihl and Husqvarna... once you go Husqy, you'll never stilh again.. all my Husqvarna equipment starts with one pull, every time. Cold or Hot starts. If your using the proper rated JASO FD and or ISO GD rated 2 cycle oil, mixed with 92 octane 50:1 ( 2.6 oz to 3.0 oz of 2 cycle oil per 1 gallon of gasoline) and the carb is tuned properly it will start within two pulls, 3 to 6 pulls for beginners, 2 to 3 for intermediate, 1 pull for Professionals. If you cant get your saw started, you are not doing something correctly, and or, service and maintenance is not being done on proper intervals. my fathers stilhs take about 3 to 6 pulls regardless.. and Ive tuned them myself as I do my Husqvarna's The Husqy will also out cut and out perform a stilh of equal power ratio class.

nope, this one starts totally at random. I keep following the steps but it fires when it feels like it. Lesson learned - for the price on one Husq it's better to buy 3 cheap Chinese saws for much shorter individual operational life but at triple failure redundancy.

@silverstar4289

6 жыл бұрын

BigSmartArmed that is where mine is. Lose a whole day of chores when it decides not to start. My Stihl products rarely need new plugs or maintenance. I am so pissed I spent 800 bucks on this thing. I dont have time to learn the nuances of a tool, when another company has one that fires up 100% of the time.

@BigSmartArmed

6 жыл бұрын

Yep, it took me hours to figure our what the deal is, this might be it for you as well; Here is how to start a flooded Husq saw; kzread.info/dash/bejne/fXVhx7eKYNbVmaw.html Seems that Husq floods all the time from the new "safety" regulations in the global Nazi-nanny state.

Ademçakır.

by definition not simple at all, simple is 3 or less steps, everything above 5 steps is complicated.

Chain brake forward or backward. This video does not make this clear. Do over.

Me thinks there are lots of anti husky trolls in these comments.

Husqvarna saws last forever Because they never start

@anthonymiller7210

3 жыл бұрын

Hard to start