That alignment is crazy Lmao

@staticspeedproductions8087

2 жыл бұрын

“Race spec” lol

@Drosemfg

2 жыл бұрын

How safe is the anti lag honestly I’m thinking about running but you made a little confusing doesn’t it matter what rpm I want my launch control

@staticspeedproductions8087

2 жыл бұрын

Yeah I mean it’s not necessarily “safe” but not necessarily “unsafe” if used in moderation. And yes you can change the numbers of activation and launch depending on what rpm you want to launch at this is just a guideline

@Drosemfg

2 жыл бұрын

@@staticspeedproductions8087 ok bet do you have a email or Instagram I can reach out to you when I do it just so I can understand correctly I can pay you for your time or whatever

@staticspeedproductions8087

2 жыл бұрын

Staticspeedproductions@gmail.com IG: @staticspeed.tm Let me know!

Thanks for showing me this, I love when the cars go BRAPAPAPAPAPAPAPAPAPA POP POP POP

Worked great for me! Skunk 2 exhaust with stock headers, going to get skunk 2 headers soon. Thank you man!!! Definitely got my sub

@staticspeedproductions8087

2 жыл бұрын

Good to hear! You’re very welcome

beautiful car man

Great 8th gen content subed

@staticspeedproductions8087

2 жыл бұрын

Thanks man! I appreciate it very much

Ima be hitting you up soon ‼️

Trying this right away tomorrow morning

@staticspeedproductions8087

3 жыл бұрын

Good morning neighbors lmaoo

@staticspeedproductions8087

3 жыл бұрын

Make sure to DM a video to me on Instagram @staticspeed.tm

@ishyishido7825

3 жыл бұрын

@@staticspeedproductions8087 got it 👍🏾👍🏾

bouta do some work to my 3rd gen TL

🔥🔥🔥

This worked well. Got sick of the exhaust fumes after 2 days. Still neat to have on file for every once in a while.

@staticspeedproductions8087

2 жыл бұрын

Yeah it’s not for daily driving for some people. I finally stopped running it after dailying the pops for a year straight but always nice to have in your back pocket

@osvaldocardenas4026

2 жыл бұрын

You dailyed it for a year?? Damn and I’m scared to run it for too long lol I’ve ran it for about almost a month I go back and forth sometimes but is it okay to run it for a year like cause I get a lot of knock thru the hondata app like it always tells me I’m getting a lot of knock and idk why

@osvaldocardenas4026

2 жыл бұрын

@@staticspeedproductions8087 idk if it’s bad or not just wondering

@jaym6187

Жыл бұрын

Do you have the file

@bodakrain3064

Жыл бұрын

@@osvaldocardenas4026 knock is registered by a knock sensor which is like a microphone. when you have a pop the sensor can pick it up as knock even if it was nothing. the more you pop the more flash knocks you will have

Do you have to do the -10 on the ignition for the 2step? Cause I have a pops and bangs map and my wife hates it but I definitely want the 2 step without the pops and bangs

Love the video btw. You def made my year on how to do this! On 2 step my si doesnt shoot flames as heavy as id like it. I know its prob cause im runnin tsudo exhaust, and test pipe with stock headers. Any settings i can mess with to improve 2 stepping? Or just raise the rev limiter up ? And then wait for better exhaust and aftermarket header

@staticspeedproductions8087

2 жыл бұрын

It’s very hard to shoot flames on 2-step without a 3” exhaust. But also I have new settings I developed since I originally made the video which work way better

@chriselias2841

2 жыл бұрын

@@staticspeedproductions8087 whats piping size for 70mm exhaust? And gotcha! Loved the vids :) keep it up man def earned a subscriber

@staticspeedproductions8087

2 жыл бұрын

70mm=2.75”

@staticspeedproductions8087

2 жыл бұрын

And thank you 🙏🏻

@fazecrazy6266

Жыл бұрын

​@StaticSpeed Productions I got a 3in straight pipe amd it don't shoot sadly maybe its the e85

Great video!!! Let me tell you she pops and bangs 🤘😂 only issue I’m having is like 30 notifications for the knock sensor 1/2/3 should that be something to worry about? Reading a little about the knock sensor could it just be picking up the combustion taking place?

@staticspeedproductions8087

2 жыл бұрын

Could be false knock but also could be real knock happening during on throttle conditions

Have 2019 civic si and Hondata Flashpro. When I open ignition but I don't get a ignition low option. Not sure what to do from here. Maybe because I don't have vtec??

What mount do you use for your gopro in the first clip?

Well this work on my k20z2 swapped fg2 since it only has vtec on one cam?? What would you change if need be??

Love the video, is this possible on the 9th gen civic with the r18? If so how can I pull this off?

@staticspeedproductions8087

2 жыл бұрын

Yessir

Can you pls make a video for us how to put 2step for us who doesn’t have the 2step option I wanna make my r18 shoot flames so bad

i got skunk2 headers but stock exhaust with a muffler delete, should i expect no flames? 🤔

would this work for a 9th gen civic LX (R-series)

Uploaded the tune and now my si stalls after like 2 seconds when I turn it on. Did I do something wrong?

Wish i found this before i sold my si 😓

Why do I only make a sound when I press the accelerator pedal? It's a simple thing. If I leave the gas pedal, the sound does not appear for me

I need help setting up the 2step on hondata tho it shows its set and 5000 but when i do the clutch and cancel its not working

Do I do this for the ignition high as well?

Hey, question. I have flashpro but I don't see anything that says Ignition Low. I have Ignition (in cam +), Ignition (in cam -), Ignition (ex cam +), Ignition (in cam -) (ex cam +), Ignition (VTEC) (in cam +), Ignition (VTEC) (in cam -), Ignition (VTEC) (ex cam +), Ignition (VTEC) (in cam -) (ex cam +), so I have no idea what to be editing. This is for my Fk8. Running the competition flashpro, catless downpipe, and no mufflers, with an Injen Evolution intake. I would be very very grateful r any help. Thanks!

When I try to go to calibration the tab isn’t there along with all the other ones by it, is there a fix to that?

Hey man is there any way I can contact not here in the comments I have some questions if that’s cool with you!

how to make 2 step flames d16 but big big big flames with collectors and full 63.5 stainless steel line with vibrant pan

can you do aem? i’m planning to get my acura cl tuned but don’t wanna sound like a dumbass but i really want this

im late but i tried the tune and got a maintenance light, how do i remove it

Would this work on a 8th gen r18

Im really curious how this is gonna sound with my PRL 3 inch down pipe and my invidia n1 76mm exhaust and the 4 inch muffler...LOL

Can i do this to my automatic EXL?

Any tunes for the 1.8l r18z1

0:12 hearing this in person is way louder than u think, u jus hear the engine scream

Sounds sick bro! What exhaust are you running

@staticspeedproductions8087

2 жыл бұрын

K-Tuned 3” exhaust with PLM Header

Will this work with r18

Tune Works!. It's just that the car wants to turn off when idling or in neutral with no pressure on gas pedal. Is that the risk of running this tune? lol

@staticspeedproductions8087

Жыл бұрын

Hmmmm usually the tune doesn’t cause issues like that. I would recommend bumping up the rpm for injector overrun restart by a couple hundred and see if it helps. Also bump the idle to 950

With the 9th gen being adjustable do u just set the 2step low like 3k then anything u set 3-5k in car for launch control it will auto adjust for it? Or do u havs to reflash the 2 step each time

@AceDiego

9 ай бұрын

did you ever figure it out?

At 5:51 your have yellow stars, mine are red how do I make them yellow

How I do this on a 07 Acura tsx?

does it have a wot box?

How were you getting flames while driving in the beginning of the video? I know how you got them on 2 step while On stand still but is it basically the same settings that you already showed us that should make it pop while driving also?

@staticspeedproductions8087

2 жыл бұрын

Yes that should make it pop while driving if you follow everything in the video. Best results are with a full 3” exhaust and Catless header for flames

@osvaldocardenas4026

2 жыл бұрын

@@staticspeedproductions8087 bett bro!!

What about Haltech Ecu ?

What’s up with the steering Car and the steering saying two different w

Great video and that BUT WHY IS YOUR WHEEL NOT ALLIGNED

@staticspeedproductions8087

2 жыл бұрын

Just did a clutch job and the steering shaft was off by a couple teeth when i put it back in. It’s fixed now lol

Hey if you would not mind me asking the number at the anti lag option how do you go about deciding what the best number are, as you said you every car is a little different. Sorry for any inconviences kind regard

@staticspeedproductions8087

2 жыл бұрын

Experiment with changing the fuel activation rpm and bringing it closer to the actual launch rpm and adding fuel in increments of 50% until you reach the desired effects!

@ChickenriceWiththeSoyEggs

2 жыл бұрын

my car is fn2 so not si 😁😁😁😅😅 but these 2 seem close enough engine wise

It will work with the cat on? Or has to be removed?🤔 Thanks for the great video bro

@staticspeedproductions8087

2 жыл бұрын

The cat does have to be removed for this to work and anytime!

@godofdubstepstepsa5781

2 жыл бұрын

@@staticspeedproductions8087 thanks brother, I ask because if my first full bolts on on my 8th gen woth the Hondata and I'm doing my research. You know 😉 thanks again.

Damn that was a great video No one and I mean no one shares this info lol So it’s nice to have someone that does🤟🏻 Is the tune safe to daily drive? Will it affect performance in a bad way?

@staticspeedproductions8087

3 жыл бұрын

Thank you bro that means a lot and I know, trying to push that great content for you guys! In my experience it hasn’t given me any issues. I’ve run a flame tune for 2 years straight with no issues. There might be a little hesitation between gear shifts at low rpms but it’s pretty much unnoticeable. Shouldn’t affect full throttle performance at all since the only changes are out of VTEC. As far as the 2-Step goes, just make sure your car is warmed up all the way and don’t sit on the 2 step for 30 seconds straight and you should be fine. No knock has been recorded by my datalogs while 2 stepping

@ArthurSperotto

2 жыл бұрын

Both the decel popping and the aggressive two step will get a ton of heat into your header and exhaust valves. I'm building a car to try to compete in SFWD, and I purposefully bought Ferrea Competition Plus exhaust valves just so it'll tolerate the abusive heat repetitively. I don't think stock valves can handle this for too long before burning.

@staticspeedproductions8087

2 жыл бұрын

About 60K miles of beating on the car and using this pop tune and 2-step with no issues and motor has 180K on it

@cheflos524

2 жыл бұрын

So u said on an si I have to put it on all cam angles? Not just 0 degrees?

@staticspeedproductions8087

2 жыл бұрын

Correct you might as well

To get a nice flame come out would 1000 on 5th gear for the fuel cut work good?🤔

@staticspeedproductions8087

2 жыл бұрын

Yes that would be good

I have a ep3 with stock exhaust. If I take the cat out and use kpro like you did will I be able to get pops and burbles like you had. Or do I need a full exhaust? Thanks

@staticspeedproductions8087

Жыл бұрын

Without a cat it will definitely burble a little bit but if you’re on a budget just delete the muffler and you should get some really nice pops

@nathanbrown6091

Жыл бұрын

@@staticspeedproductions8087 cool I’ll start with a gutted cat and see how it goes from there. It’s been a little over 3 weeks and I still haven’t received my kpro. Hopefully it comes in this weekend

Are you able to pass inspection with a kpro? I am not worried about visual inspection i am talking about the car being connected to it's obd2 connector

@staticspeedproductions8087

2 жыл бұрын

I’m not sure tbh they don’t do inspections where I live

Send me a tune bro with these new cams

can you set up antilag for rolling launches?

@staticspeedproductions8087

2 жыл бұрын

Good idea. Gonna attempt to wire it up tomorrow and make a video for you guys

Will you be able to do pops with a hight flow cat?

@indymiata

Жыл бұрын

probably not, if you try it will blow out the cat

I can only do -4.00 on ign tables

Is there an equivalent of overrun fuel cut delay on kpro compared to flashpro?

@staticspeedproductions8087

2 жыл бұрын

I’m sure there is and I was assuming it would be the same

@DTuned559

2 жыл бұрын

Yes, but you will need to run ignition cut which he did not explain

@staticspeedproductions8087

2 жыл бұрын

Overrrun fuel cut delay should have nothing to do with ignition cut, that just dumps fuel when you are decelerating and in gear/ engine braking

Quick question, does a flame tune damage any part of the engine? Panning to have it on my R18

@brandonsankar6290

Жыл бұрын

Long term not healthy for any motor. But as far as the r18 goes definitely do not run any tune unless you are running a low psi kit. those motors are really meant to stay stock

@ryeleon876cr

Жыл бұрын

​@@brandonsankar6290 my r18 engine is stock with a turbo attached and tuned to 280hp hondata. Been this way for the pass year and a half.. No engine damages yet.. just regular oil maintenance and big injectors, fuel pump, etc.. Plus i use the car as a daily.

Tried using these setting and im getting flames when doing the 5% throttle, But I'm not able to get the flames on the 2 step.

@staticspeedproductions8087

2 жыл бұрын

I figured out how to make it work with my new settings but every car is different so I charge for the service hmu on IG

Can you do one for tsx

@staticspeedproductions8087

2 жыл бұрын

Yessir

do you know if this’ll work on ktuner? also, is the 2-step applicable to manual only? if not, how would i do 2-step on an automatic?

@staticspeedproductions8087

2 жыл бұрын

Really depends on the car, I know it work on automatic TL’s, but ktuner is complete junk to be honest

@chibba5418

2 жыл бұрын

2 step works for automatics afaik. I recommend only raise fuel cut delay. Don't retard timing.

Hi, may I ask how to make a spitting sound when changing gears and not closing the accelerator?

@NgocPhamVN96

Жыл бұрын

That's call "flat shift". You need to have standalone ecu to do that.

@staticspeedproductions8087

Жыл бұрын

Change launch control to the same value as rev limiter. Then change launch deactivation speed to 200MPH. In Anti-lag section put 5000 additional fuel 45 Degree Ignition Retard Minimum activation RPM to 200RPM before your launch limiter Enjoy

My mpg is terrible now 💀 I did some custom things tho

How would I adjust 2step rpm if I don’t have oem steering wheel ?

@michaelfiorentino4359

Жыл бұрын

Can’t unfortunately, if you got a quick release they sell brackets for oem buttons

Can you do this with ktuner? The option for ignition cut on mine is grayed out

@ynghstle4426

Ай бұрын

Same, have you figured it out?

Can u set a tune on my car it’s a 02 Acura rsx (hondata kpro(v4)it’s boosted on a base map I’ll pay also

@staticspeedproductions8087

2 жыл бұрын

Of course DM me on Instagram @staticspeed.tm I will get you right

I can do this on ktuner

So question do you have to retard the ignition to -10 for the anti lag 2 step to work or that's just for the pops and bangs

Can I still do 2 step with a quick release? Since I don’t have the buttons

@joeyortiz2987

Жыл бұрын

you won't be able to change it on the fly but you could buy the buttons

Do you mess with older Subaru’s at all? I have a ft450 powered Subaru Legacy sport that needs some love

@staticspeedproductions8087

2 жыл бұрын

Never have to be honest but I would love to give it a shot!

@saccusgalifinaccus3184

2 жыл бұрын

How do I get ahold of you? I don’t have ig but I do have fb

@staticspeedproductions8087

2 жыл бұрын

Email staticspeedproductions@gmail.com

What do you charge to make the tune?

@staticspeedproductions8087

2 жыл бұрын

$80

Am I able to do this on an N/A civic and how do I setup anti lag if I don’t have launch control 05 btw

@staticspeedproductions8087

2 жыл бұрын

You need launch control to do this mod and yes my civic is N/A it can be done if you have Hondata

@cater6008

2 жыл бұрын

@@staticspeedproductions8087 would you be able to do a tutorial on how to setup hondata and and install it

@staticspeedproductions8087

2 жыл бұрын

All the info you need is in the help section of Hondata if you have Flashpro. You said 05 civic but it really depends whether it’s an EP3 with a K20A3 or an ex/lx with a D17. Either way both of those require actual modification to the ECU that Hondata can do for you if you ship it ouf

I know this is with a kpro but where can I find the over run fuel cut delay in a s300

@shingo1999

Жыл бұрын

go to parameters then click on the tps tab and set overrun fuel cut tps to 0.0 and set it to 300 ms or whatever works for your set up pay attention to afr so your not to rich on decel

@rileybhatti7910

2 ай бұрын

@@shingo1999my S300 has the overrun fuel cutoff (map) read in Map (kPa) what do I do for that?

Can you do this with 9th gen?

@staticspeedproductions8087

2 жыл бұрын

Yes just DM me on Instagram @staticspeed.tm

So i am trying to this anti lag/launch control aggressive and not the rice sound. Car was apparently dyno tuned from previous owner. (I plan to get it retune soon just waiting on some parts) Why cant i see the “anti lag” options on my hondata?

@staticspeedproductions8087

2 жыл бұрын

Car was probably tuned using a type R basemap. Check under Calibration with the tune loaded up and see what vehicle it says

@syndfg2

2 жыл бұрын

@@staticspeedproductions8087 yes it says type r 2006-2011. So is that only a basemap? Or was it actually tuned dyno?

@staticspeedproductions8087

2 жыл бұрын

It could be a basemap or actually be tuned, only way to tell is by having it retuned on a Civic Si map that actually has the antilag settings. Most likely I can make the car run better than whoever tuned it before especially if you’re adding more parts

so all you need for this is some sort of exhaust and hondata flash pro?

@staticspeedproductions8087

2 жыл бұрын

Indeed

@DTuned559

2 жыл бұрын

And no cat

@benh8664

2 жыл бұрын

thank you

so i tried this on my car and its way to excessive and it does it even when im not trying to especially in 1st and 2nd gear when im going through my neighborhood. how do i make it pop less especially in 1st and 2nd

@staticspeedproductions8087

2 жыл бұрын

Just set it from like 3500-4500. That way you can just shift below 3500 and not pop everywhere

@chibba5418

2 жыл бұрын

lower the fuel cut delay

Would this work on stock d16 with stock p28 tune?

@staticspeedproductions8087

2 жыл бұрын

On S300 yes it should

@andreidragostoader5825

Жыл бұрын

You can make same thing with hts

Would this work in my 10th gen accord 2.0T automatic??

@staticspeedproductions8087

2 жыл бұрын

Try it out let me know

@fayanshaikh9487

2 жыл бұрын

@@staticspeedproductions8087 😅 I’m not tryna mess anything up but for sure

whats the -100 gear ignition

@staticspeedproductions8087

2 жыл бұрын

Not sure but I wouldn’t touch any of the gear ignition settings just edit the main ignition low table

Could I set the additional fuel on antilag higher than 750?

@staticspeedproductions8087

Жыл бұрын

Yessir just keep doubling the amount until you get the desired results

@drakegilberto7604

Жыл бұрын

I’m assuming bigger flames would be the result?

7:50 ..bro is your alignment good?

@staticspeedproductions8087

2 жыл бұрын

Yeah steering wheel just got out of alignment when I dropped the subframe it’s fixed now

the anti lag section doesn't show up on my flash pro for my tsx any idea as to why?

@staticspeedproductions8087

Жыл бұрын

They never offered that feature for the TSX Flashpro but I have a way around it for the antilag 2-step. It’s a little harder to dial in. Shoot me a DM on Instagram and I can explain

@daltooze

Жыл бұрын

@@staticspeedproductions8087 dm sent

With this can you shoot flames with a TL, does it have to be catless?

@staticspeedproductions8087

2 жыл бұрын

Yes it works for Acura TL‘s and yes you do have to be Catless

@rafff09

2 жыл бұрын

Can’t you have a hiflow cat at least? To meet the legal requirements:(

@staticspeedproductions8087

2 жыл бұрын

Well you CAN do it with a cat but it will eventually blow it out and you will fail inspection then. I would recommend just moving to a different state lol Florida is nice, no inspections

@rafff09

2 жыл бұрын

@@staticspeedproductions8087 I’m in Australia 🇦🇺 Sydney and here they don’t run the emissions and all that checks like Cali does, but here you’re required to have a cat wether it’s restricted or not doesn’t really matter and getting pull over 🚔 with a straight pipe would definitely get me a ticket but won’t if I have a dummy cat hanging underneath.

@staticspeedproductions8087

2 жыл бұрын

Just lower your car so you can’t see underneath, problem solved lol. Or just hollow out your cat with a pry bar

Any reason my hondata won’t let me enter ignition low and pull up that colorful chart?

@thegamedestroyer3497

Жыл бұрын

You might have it minimizes because I did that by accident and it took me 1 months to fine out and I even deleted it and it was the same thing. So just check if it’s minimize

@staticspeedproductions8087

Жыл бұрын

Yes you have to minimize the window and then scroll down and the chart will be hidden in the bottom corner

Hi, may I ask how to make a spitting sound when changing gears?

@1nut167

Жыл бұрын

No lift shift?

Since the program doesnt let me have "anti lag", think its possible to retard timing at WOT ignition timing of where 2step is at?

@staticspeedproductions8087

2 жыл бұрын

If you retard WOT ignition timing then you will have no power

@nashie25

2 жыл бұрын

@@staticspeedproductions8087 hmmm know anyway on how i can get pops on 2step if i dont have the anti lag option?

@staticspeedproductions8087

2 жыл бұрын

Yes you can install a Bee-R rev limiter. It’s a pain to install because you have to wire it to each of your ignition coils but it sounds insane you can look up videos on KZread

@EvoShotZ-ft1vy

Жыл бұрын

What car u got

How much for a pop bang flame tune

@staticspeedproductions8087

Жыл бұрын

$75 currently

How does it work for kpro

@staticspeedproductions8087

2 жыл бұрын

Very similar if you can’t figure it out then DM me on Instagram and I can make the tune for you for a good price @staticspeed.tm

Héllo if i want redline 2 step its the same process?

@staticspeedproductions8087

2 жыл бұрын

Probably have to set it like at least 300 RPM below redline but that sounds like a crazy idea to me

@chibba5418

2 жыл бұрын

yes, that's fine. Your 2 step limit (and restart) should be below or at your rev limit (and restart), respectively. If it's above, you won't be able to 2 step, as your car will cut fuel based off the rev limit & restart.

Works on hondata s300 v3???

@staticspeedproductions8087

2 жыл бұрын

S300 is a little different but very similar yes

the steering wheel tho

Question: for the anti lag can I set the additional fuel lower? I still have a cat so I don’t want a crazy amount of fuel fucking the cat up before I get a down pipe 😅

@staticspeedproductions8087

2 жыл бұрын

Yes you can set it to whatever you want

@staticspeedproductions8087

2 жыл бұрын

It’s not gonna shoot flames with a cat tho most likely

@740tuning9

2 жыл бұрын

@@staticspeedproductions8087 not looking for flames, just hate the ricer rev limit the car comes with 😂

@staticspeedproductions8087

2 жыл бұрын

True that lol

@740tuning9

2 жыл бұрын

@@staticspeedproductions8087 soooo I went for a bit of a datalog, and I’ve never tuned before so this was my first time. I drove for maybe 25-30mins and did maybe 2-3 pulls and hit the 2 step twice at my work and when I got home I looked at my hondata app that I had recording certain things and I had a knock count of 5

Why ya wheel like that😭

have a question about the 2 step what can i do if i dont have a anti lag

@kenedilserpas3805

2 жыл бұрын

its for a honda civic 2012 lx R18

@staticspeedproductions8087

2 жыл бұрын

I have another technique I use for cars that don’t have the anti-lag settings

@kenedilserpas3805

2 жыл бұрын

@@staticspeedproductions8087 ohh allright how can i do that

@chibba5418

2 жыл бұрын

have the limit and restart at the same number; raise fuel cut delay in 1st; increase fuel trim. don't retard timing.

My hondata doesn’t have the anti-lag option, how else could i set up the 2-step??

@staticspeedproductions8087

Жыл бұрын

Dm me on Instagram @staticspeed.tm

@hou.fg2639

Жыл бұрын

@@staticspeedproductions8087 alright i dm’d

@hou.fg2639

Жыл бұрын

@@staticspeedproductions8087 dk if I sent it to the right one

I just had someone ask me to tune this in........ ergh

we dont have to edit ignition high?

@staticspeedproductions8087

2 жыл бұрын

I’ve tried editing ignition high as an attempt to get VQ Boi rocket fuel flames but I couldn’t get it to work. All it would do is really fast machine-gun type burbles. And it affected performance putting a slight lag between shifts at high RPM.

@FB6sebi

2 жыл бұрын

@@staticspeedproductions8087 oh alr i put the fuel cut to 1000 to see how obnoxious it was😭 worst mistake lol

@staticspeedproductions8087

2 жыл бұрын

Not gonna lie I run 1000 in 5th gear because that’s how you get really big flames by just letting off at 4K RPM and tapping the throttle like 3 seconds later. Any other gears and it is constantly popping lol

@FB6sebi

2 жыл бұрын

@@staticspeedproductions8087 im just playing around with the settings i went from 1k to 500 to now ima run 300 1-4 gear and ima take your word for 5th gear running 1k lets see how it goes

Does this do damage to the engine

@staticspeedproductions8087

10 ай бұрын

Not that I or any of my customers have experienced

@jarelsuckrajh5932

10 ай бұрын

@@staticspeedproductions8087 ok