Learn how to tune your Honda with me for free! After tuning 100’s of Hondas and Acuras over the last few years I will be sharing all of my knowledge with my subscribers and viewers
So the ethanol kills the fuel level sensor in these cars?
@AnthonyFeehan17 күн бұрын
hell yeah brother, saw this 2 years ago and always wanted to get it done, getting my trans rebuild this week bc i missed too many gears and the rear main seal was leaking like a mf... you already know, new cables and motor mount to kill that bunny hop!!
@Highlander143217 күн бұрын
Sounds so good We'll tell our kids one day about how good Hondas used to be
@yuolo997922 күн бұрын
Rolling anti lag does nothing to a non-forced inducted engine sadly...
@Pamaga.923 күн бұрын
Afr roll vs dyno?
@1slow8thgen7325 күн бұрын
I need help setting up the 2step on hondata tho it shows its set and 5000 but when i do the clutch and cancel its not working
@enhancedphysique6452Ай бұрын
Can you make one for 9th gen?
@1slow8thgen73Ай бұрын
So question do you have to retard the ignition to -10 for the anti lag 2 step to work or that's just for the pops and bangs
@flamestagАй бұрын
this is a long shot with how old this video is, but regarding the berk test pipe, do i need a tune for that? will it throw a code without a tune?
@sup2753Ай бұрын
When I try to go to calibration the tab isn’t there along with all the other ones by it, is there a fix to that?
@JoshGRacingАй бұрын
Is there a way to keep the same power delivery and increase the power? Meaning I like the hard VTEC, I don’t want it to turn into some linear thing.
@ervindelcarmen4564Ай бұрын
Can you do this on automatic transmission?
@brandendecaro6785Ай бұрын
When’s the next?
@phil600616Ай бұрын
Do you have issues/codes without the evap/emissions stuff thats normally where that breather is?
@yukonstriker1703Ай бұрын
Red 'sharpie' marker returns the 'Si' in the seats to like new 😊
@matthewguzman3632Ай бұрын
can i copy and paste this tune on a race basemap? just so i can be map instead of maf
@TheLotBoysTV2 ай бұрын
I have to do this because second is annoying to get, 4th feels funny and reverse is made like 80% of the time. Obviously that cable is stretched.
@yohgtАй бұрын
I'm having the same issues with mine, I just bought cables see how it goes.
@matthewguzman36322 ай бұрын
i got skunk2 headers but stock exhaust with a muffler delete, should i expect no flames? 🤔
@clinthering96952 ай бұрын
I need moreeeeeeeeeeee
@gfolks122 ай бұрын
whered you get the bumper clips
@slow6six6202 ай бұрын
Just installed some today, good tip is install the shifter side first>then the brackets> then the transmission side or you're going to be fighting the tension of the cables when putting them on. The cable that go under the shifter is marked with a yellow dot and the other cable goes on the side. It took me 3 hours fighting the cables to figure this out.
@JustThePizzaGuy2 ай бұрын
I was doing this as well and everything is back in besides the brackets underneath the car. did you put the brackets on before or after routing the cables
@slow6six6202 ай бұрын
@@JustThePizzaGuy i routed the cables inside connected it to the shifter removed the bolts took the shifter off. That release tension when routing the cables put the plate on then brackets on then the side on the trans, re installed the shifter after everything was in place.
@JustThePizzaGuy2 ай бұрын
@@slow6six620 how about that new bracket that came with the cables and the heat shield sleeves?
@thatzlyght7552 ай бұрын
Great video my question is can I still use stock motor mounts I hate the vibration I get with the hasport lower mount ?
@trevorwitteveen-ke6og2 ай бұрын
So i dont have a si will all these mods work or what ? Its just a regualr manual trans 06 civic
@FrozenIceАй бұрын
I'd say you'd be able to do at least half of those mods on the R18, not as robust of an engine and transmission in stock form
@mexbeanr2 ай бұрын
Mid
@moonox16672 ай бұрын
im late but i tried the tune and got a maintenance light, how do i remove it
@jonmcclane74332 ай бұрын
Jesus, that Acura is absolutely gorgeous.
@jipg44193 ай бұрын
Fuel tables next🗣️
@Carshows2243 ай бұрын
The guy in the blue rsx shifts very early.
@LixiN2346v3 ай бұрын
beautiful car man
@Hondaforlife2step3 ай бұрын
Part2 ❤
@iceyhotfire3 ай бұрын
i was not expecting for you to beat those v6s
@blunty963 ай бұрын
Where is part 2 bro
@seley48663 ай бұрын
What about k24
@tigerrider67113 ай бұрын
What track lets you run with a hat on lol
@mackcummy49763 ай бұрын
What K24 is it? Is it tuned?
@GCFab3 ай бұрын
Looking forward to pt.2
@ashemorris3 ай бұрын
Hey, question. I have flashpro but I don't see anything that says Ignition Low. I have Ignition (in cam +), Ignition (in cam -), Ignition (ex cam +), Ignition (in cam -) (ex cam +), Ignition (VTEC) (in cam +), Ignition (VTEC) (in cam -), Ignition (VTEC) (ex cam +), Ignition (VTEC) (in cam -) (ex cam +), so I have no idea what to be editing. This is for my Fk8. Running the competition flashpro, catless downpipe, and no mufflers, with an Injen Evolution intake. I would be very very grateful r any help. Thanks!
@cameronbunk24473 ай бұрын
Do you do e tuning ? Im looking for a basemap for my turbo fg2 for the first start up im new to the tuning world 🙏🏽
@hecks_b_rex40103 ай бұрын
I’ve heard that the 08 tsx cams are better and different than the 04 to 07 tsx cams!?
@tyaettlee13003 ай бұрын
Pt 2?
@dham993 ай бұрын
I like how in the very first race the RSX driver ways 'bye bye'...then they're neck and neck every time (until the passenger wasnt in the G37 lol). I know this was 3 years ago..anything done to the RSX since?
@_PaZoZo3 ай бұрын
Might be hitting you up soon for a custom tune. Just got the Hondata been experimenting with the base maps
@bmacthejacked3 ай бұрын
i did this set up. is it normal during warm up for AFR to bounce between 15 to 19 ?
@K24Murph3 ай бұрын
Do I do this for the ignition high as well?
@tigerrider67113 ай бұрын
I don’t understand the theory behind this, so you have the ball park timing for WOT but interpolation just draws a line. There should be specific timings for each RPM?
Пікірлер
Afr dyno vs roll?
Thanks brotha when will there be a part 2 ?
Is that a TB spacer hiss I"m hearing? 😁
Whats ur tune for the antilag
Does honda k20 is the best i4 engine ever bro ?!
So the ethanol kills the fuel level sensor in these cars?
hell yeah brother, saw this 2 years ago and always wanted to get it done, getting my trans rebuild this week bc i missed too many gears and the rear main seal was leaking like a mf... you already know, new cables and motor mount to kill that bunny hop!!
Sounds so good We'll tell our kids one day about how good Hondas used to be
Rolling anti lag does nothing to a non-forced inducted engine sadly...
Afr roll vs dyno?
I need help setting up the 2step on hondata tho it shows its set and 5000 but when i do the clutch and cancel its not working
Can you make one for 9th gen?
So question do you have to retard the ignition to -10 for the anti lag 2 step to work or that's just for the pops and bangs
this is a long shot with how old this video is, but regarding the berk test pipe, do i need a tune for that? will it throw a code without a tune?
When I try to go to calibration the tab isn’t there along with all the other ones by it, is there a fix to that?
Is there a way to keep the same power delivery and increase the power? Meaning I like the hard VTEC, I don’t want it to turn into some linear thing.
Can you do this on automatic transmission?
When’s the next?
Do you have issues/codes without the evap/emissions stuff thats normally where that breather is?
Red 'sharpie' marker returns the 'Si' in the seats to like new 😊
can i copy and paste this tune on a race basemap? just so i can be map instead of maf
I have to do this because second is annoying to get, 4th feels funny and reverse is made like 80% of the time. Obviously that cable is stretched.
I'm having the same issues with mine, I just bought cables see how it goes.
i got skunk2 headers but stock exhaust with a muffler delete, should i expect no flames? 🤔
I need moreeeeeeeeeeee
whered you get the bumper clips
Just installed some today, good tip is install the shifter side first>then the brackets> then the transmission side or you're going to be fighting the tension of the cables when putting them on. The cable that go under the shifter is marked with a yellow dot and the other cable goes on the side. It took me 3 hours fighting the cables to figure this out.
I was doing this as well and everything is back in besides the brackets underneath the car. did you put the brackets on before or after routing the cables
@@JustThePizzaGuy i routed the cables inside connected it to the shifter removed the bolts took the shifter off. That release tension when routing the cables put the plate on then brackets on then the side on the trans, re installed the shifter after everything was in place.
@@slow6six620 how about that new bracket that came with the cables and the heat shield sleeves?
Great video my question is can I still use stock motor mounts I hate the vibration I get with the hasport lower mount ?
So i dont have a si will all these mods work or what ? Its just a regualr manual trans 06 civic
I'd say you'd be able to do at least half of those mods on the R18, not as robust of an engine and transmission in stock form
Mid
im late but i tried the tune and got a maintenance light, how do i remove it
Jesus, that Acura is absolutely gorgeous.
Fuel tables next🗣️
The guy in the blue rsx shifts very early.
beautiful car man
Part2 ❤
i was not expecting for you to beat those v6s
Where is part 2 bro
What about k24
What track lets you run with a hat on lol
What K24 is it? Is it tuned?
Looking forward to pt.2
Hey, question. I have flashpro but I don't see anything that says Ignition Low. I have Ignition (in cam +), Ignition (in cam -), Ignition (ex cam +), Ignition (in cam -) (ex cam +), Ignition (VTEC) (in cam +), Ignition (VTEC) (in cam -), Ignition (VTEC) (ex cam +), Ignition (VTEC) (in cam -) (ex cam +), so I have no idea what to be editing. This is for my Fk8. Running the competition flashpro, catless downpipe, and no mufflers, with an Injen Evolution intake. I would be very very grateful r any help. Thanks!
Do you do e tuning ? Im looking for a basemap for my turbo fg2 for the first start up im new to the tuning world 🙏🏽
I’ve heard that the 08 tsx cams are better and different than the 04 to 07 tsx cams!?
Pt 2?
I like how in the very first race the RSX driver ways 'bye bye'...then they're neck and neck every time (until the passenger wasnt in the G37 lol). I know this was 3 years ago..anything done to the RSX since?
Might be hitting you up soon for a custom tune. Just got the Hondata been experimenting with the base maps
i did this set up. is it normal during warm up for AFR to bounce between 15 to 19 ?
Do I do this for the ignition high as well?
I don’t understand the theory behind this, so you have the ball park timing for WOT but interpolation just draws a line. There should be specific timings for each RPM?