A simple thing to remember with an 18 speed is you have 9 forward gears if you split each gear it's like 9×2 which gives you your 18 gears

@user-nu6hi2ek6d

9 ай бұрын

So is it ok to split ever gear ?

@alvinkelley1255

9 ай бұрын

@@user-nu6hi2ek6d it is but it's not necessary unless you doing heavy haul

@hakeemaderibigbe3985

9 ай бұрын

Hmmm, Good coach...

"There's never a reason to haul ass in reverse, okay"-Quotes to live by

@aaronsanborn4291

3 жыл бұрын

When you're backing nearly a mile down a logging road....just sayin

@maxinpains6937

3 жыл бұрын

LMAO 🤣

@blauer2551

3 жыл бұрын

@@aaronsanborn4291 A lot of 10 speeds have a really low speed high RPM in reverse so high gets a lot of use.

@clintonleague1272

2 жыл бұрын

If you have to merge with traffic you can't f*ck around!!!

@XaviRonaldo0

2 жыл бұрын

Unless someone is going to back into you 😂

Best explanation i've seen on KZread. Also for splitting. You can "pre select" the split. If you're in 6 gear and you wanna split soon. You can split while on throttle. It's not gonna do anything while you're on throttle. You let off and get back on it. and it's gonna split.

Don’t let this distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry’s and bought three t66 turbos with nos, and a motec exhaust system. Hopefully you learn how to shift so you can outrun those civics.

@DEATHWISHVQ

Ай бұрын

Boomer ass joke and cringe

Iv been a wrecker operator for years and i usually drive a 6 speed international. Im about to be in an 18 speed 50 ton. And i was definitely a little intimated. You definitely made a super helpful video explaining everything perfectly! Thanks so much!

@CoryJDraper

Жыл бұрын

Right on, great to hear from you...

@amandabhandhel1388

Жыл бұрын

How did it work out for you? I haven't driven a manual in years, and I'm thinking about going to a company that only offers 18 speeds.

@williamcoltrane9184

Жыл бұрын

I’m driving a 95 international.. when the truck warms up and I put it in gear why does it grind so badly?

@CoryJDraper

Жыл бұрын

@@williamcoltrane9184 Probably worn trans or clutch. After it's warm oil might lube abit making it shift better. 1995 is quite old now, nothing like a rebuild if budget allows...

@williamcoltrane9184

Жыл бұрын

Well it’s a yard truck that I use to haul material around the yard . It shifts great at first an as the day goes it gets harder and harder to get into gear

Most likely I'll never ever drive a truck, and after watching your vid I'm still impressed by 18 gears. However, it's amazing how you explained it in really simple vocabulary, which isn't always easy when you're experienced at doing something. Hell, you even made me understand it.

@c.a.mcneil7599

2 жыл бұрын

And if you did splitting bottom end you would do like most skip bottom gears till you get to uper gears. Unless at 100k. Wich is heavy haul.

@danceoffAsh

2 жыл бұрын

You can try this with American Truck Simulator. Pretty fun!

@jesusislord6545

2 жыл бұрын

Repent to Jesus Christ ““Therefore I tell you, do not worry about your life, what you will eat or drink; or about your body, what you will wear. Is not life more than food, and the body more than clothes?” ‭‭Matthew‬ ‭6:25‬ ‭NIV‬‬ K

@regigilman2255

2 жыл бұрын

@@jesusislord6545 he sure is lord of lord and king of kings No demon would want to be captured by him... And so according to your recent testimony How long will you be fasting?

You must have small kid's or a man of the cloth, your level of patience and clarity was a joy to hear. I'm a retiree (not a truck driver) and wanted to learn this for American truck simulator, my new hobby. Now I can complete my setup. Thanks again. Safe travels and God bless 🙏.

@jaybird0312

2 жыл бұрын

American Truck Simulator. That's awesome! Lol. Love those games.

@earlemersonjr9784

Жыл бұрын

How do you have your setup for American truck setup for 18 speed

@willisbenyshek199

3 ай бұрын

I appreciate you for serving our country, if you did.(your username.) ATS is too good, need to level it up by Getting a shifter.. I’ve been using the paddles on my wheel.😢😂

@SemperFi042

3 ай бұрын

Thanks for responding, I absolutely served. Thank you for your support. As you can see my post is over 2 yrs ago, but thanks to your tutorial, I'm shifting gears with the big dogs 😅. Up until your video I really did think that it was 18 individual gears to learn. Take care. Semper Fi 🇺🇸 and God bless.

@SemperFi042

3 ай бұрын

​@@earlemersonjr9784I downloaded the game from STEAM. I bought the G29 setup, shifter and button box.

The grey splitter button denotes the transmission as an 18-speed. Red is 13-speed, and blue is 15-speed. Blue can also be a Super-10, but those aren't common at all. There are 18 forward gears. With the range selector down, there are 10 gears on the bottom - it's a 5-speed transmission and you can split each gear. And with the range selector up, there are 8 more gears on the top. In the top range, you don't get low gear. Unless you're running heavy (+100K lbs), in a gravel pit, or on ice roads, most of the time you're just going to drive it like a 12-speed - 4 in the bottom, and 8 in the top. Splitting gears in the bottom...really, I don't know any driver that really wants to work that hard. Finally, for those of you downshifting - downshift whole gears. Once you're experienced, you can split down 1/2 a gear, but again, who wants to work that hard. If ole' timers are explaining it to you, they may say direct (splitter back) and overdrive (splitter forward). Those same ole' timers will tell you that they drove a 5 & 4 uphill to school both ways when they started out! ;0) Safe trucking everyone. All the best, Cheers Rick

@ShazzledWolf32

Жыл бұрын

Super 10s are grey commonly one of the trucks in a trucking company I sometimes work around is a super 10

@creamcake7392

Жыл бұрын

As somebody who doesn’t drive trucks this explanation blew my mind 😂😂 complicated stuff just to change gears

@mikemesser4326

Жыл бұрын

Never drove an 18 spd, but used to be a trainer on the Super 10. Sadly, I can no longer handle a manual for long periods. My feet just can't handle a clutch for long. (Health issues.) I do miss the Super 10 though.

@jasonbuhl1636

Жыл бұрын

yes color of selector is the best identifier also blues can be a 8LL

@ShazzledWolf32

Жыл бұрын

@@jasonbuhl1636 I think that’s what mine is there are 3 lows and 3 reverses and it’s a blue splitter

I like how you remind people to just stay calm with a calm voice . When my niece first started driving for a living I told her always stay calm in control just pull over take what I call a 20 minute power nap/meditation to collect yourself forget about all the pressures .

You’re explanation is a lot better than you give yourself credit for. I’m not an operator, but I’ve always been interested in semi trucks, and I have a great deal of respect for you guys and girls who keep our economy moving. I’d love to get behind the wheel in a big parking lot just to see what it’s like. Thanks for the content. You’d be a great trainer.

@CoryJDraper

Жыл бұрын

Thanks for the nice words...take it easy

@rooburger

Жыл бұрын

I never drove one but am learning maintenance helping a neighbor. 4 western star with Detroit 60 and a kenworth running a cat. Gliders without emotions. Im about 3 months in and learning a lot... I loaded trucks for s living so I have a certain bond with trucks... I like it

I love driving an 18-speed rig, it's what I learned on. Not complicated at all, just seems that way at first. The gear splitter is awesome for smooth acceleration, especially when hauling heavy loads uphill.

@HaitiantruckerRony

Жыл бұрын

Driving an 18 speed is fun kzread.info/dash/bejne/gZ2V1ZqpYpSZntI.html

Thank you!! I needed this. My company gave me the 18 speed truck and told me that if I could do 13 , then I could do 18. But I was confused about it. This made the most sense! Now I can ride smoother!

@leanonme1065

2 жыл бұрын

For best explanation 18 is just 13 but the difference is that in 18 you have to split the gear in low gear ( 1, 2, 3, 4) but in 13 you don't split in low gear, you split only in higher gear ( 5, 6, 7, 8 )

@billyjoniklewski8018

2 жыл бұрын

This guy's doesn't know shit about this shift pattern he's a joke I was taught old school from my uncle he doesn't know shit from the beginning of this video I'm pissed

@leanonme1065

2 жыл бұрын

@@billyjoniklewski8018 are you ok?

@exlynxjock

2 жыл бұрын

He actually over complicated it. If you can drive a 13 speed then it's identical except for the fact you can now split the gears in lower range as we as the high range. Easiest way to think is the gear box shifts just like a 9 speed. But you have added option using the Grey button to split every gear into a high and low as well Think of it as shifting 3, 3 and half , 4, 4 and a half ,5 ect. With the half gears being optional . But available if needed.

@irenepetty5206

2 жыл бұрын

@@exlynxjock I needed the over-complicated explanation

Best explanation I’ve watch so far, thanks really clear up everything.

@chrispayne36

2 жыл бұрын

I'll try to make a better one

@donje31

2 жыл бұрын

@@chrispayne36 lol 😂

@williebaker1901

2 жыл бұрын

exactly what I said just stumbled across this. was actually riding in my buddies old school pete last night dropping my dry van at my house after my truck stopped on me. and this explains what I was hearing and wondering why I heard shifting when he didn't actually move the stick. but excellent video and now I can grasp the concept of driving an 18 speed. I've only drove a 10 and a 5 speed day cab.

@cryowarrior1

2 жыл бұрын

holy crap my mind is blown thank you for an easy how to guide !!!

@msain427

2 жыл бұрын

Nooo

Never driven anything aside from standard 'car' (5/6 speed) manual and likely won't but it is great to have at least a basic understanding of how these transmissions work. Thanks Cory!

@Bruce6001

2 жыл бұрын

Same, just in case I want to know. Maybe a zombie apocalypse or aliens and anything in between

@davevailmba

Жыл бұрын

You never know... one day you will decide to get out there on the road. And now you have this.

I learned how to drive and 18 speed in 5 min. The boss man just said with a huge smile on his face " oh son hop on in the hot seat and put on your seatbelt I'm gonna learn you today!"

Don't even have a cdl or drive trucks, but looked this up out of curiosity to see how it works compared to normal 5 speed. That's some cool shifting 😊

I drive manual cars, never anything over 6 gears. Coming from someone who has no knowledge on these transmissions, this was a damn good explanation. You made it very easy to understand

Nothing like learning from someone who is passionate about what they do. Good job

It's unlikely that I'll ever drive a semi and even more unlikely I'll ever have to drive an 18 speed but I sat through every second of your video. I'm a teacher by profession and you probably explained a concept better than most teachers today can actually explain something. Perfect mix of simple vocabulary, visual aid, and repeated demonstration. That's how you know someone is knowledgeable or a specialist in a specific subject or skill, when they're able to explain something to almost anyone. Every vehicle I've ever owned has been standard and even I was confused how they got 18 gears out of that shifter. That splitter feature is amazing I never knew that even existed. Whoever you work for is lucky to have you working for them and if you are self employed you should look into offering training sessions for large trucking companies. If you offered an educational course that incorporated a review of basic truck safety training, roadside safety, driving safely in congestion, and whatever else you see fit I could see some companies hiring you as a presenter or even trainer. Now a days safety is becoming a bigger and bigger issue. It would save the company time and money. I'm not too sure because I'm not in that industry but I would assume that trucking companies would have to do some sort of yearly refresher or training videos for their drivers as part as health & safety laws. I could be wrong but either way, you really know your stuff about this Trans and you can tell you have been driving for a long time by the way you speak. You really can tell he is passionate about his profession and is trying to encourage others not.to be afraid or get turned away because it's intimidating. I commend you sir and thank you for all you do!

I would love to order an 18 speed DD13 with a very high highway rear end for regional work. Nothing like that power and flow of an 18 speed. Just the perfect gear in any scenario. I got taught how to drive on an 18spd when I was 13 before I drove anything else. Gotta love trucking grandpas.

Thank you. That really helped me out. My new assignment is an 18 speed and I have no experience with that transmission. Thanks to you explanation I feel much better equipped to handle the new truck.

I’m about to start a job driving my first Peterbilt and I’m super excited. Your explanation couldn’t be any easier. I definitely have a lot more confidence now. I’m used to driving a 10 speed manual. You really made this sound like it’s going to be a lot of fun. Thank you.

@CoryJDraper

Жыл бұрын

Glad I could help! TYhat's awesome. Take it easy...

I had one of those transmissions in a heavy haul truck with a C-15 @ 550 HP. It also has a switchable rear end ratio between 4.11 and 5.66. The 4.11's would run down the highway as much as 80 MPH but when I used the 5.66 ratio 65 was all I could do, but the 5.66 ratio felt real strong when you were grossing 300,000 pounds. We had an old Ford dump truck that had a turned around 15 speed and a 3406 @ 425. My drivers called it "The Time machine" and one driver that claimed he run it out claimed the clock on the dash ran backwards when he topped out. Here's to big trucks and good truck driving stories.

This is the best video I’ve seen so far 😂 everyone else just shows themself driving the truck no explanation whatsoever on how to actually split the gears thank you brother❗️ I pick up my 2020 Peterbilt 389 next week and this helped me out a lot❗️

@CoryJDraper

8 ай бұрын

Right on Pedro!

An amazing transmission. Nothing like that dialed in feeling when you're dancing that beautiful device in your hand!

This was a great explanation! I'm going through trucking school and most of the rigs there have Eaton 13 speeds. I've gotten really really good at shifting within a couple weeks, but it only just recently clicked with me how the 13 actually works, and then I got curious about 18 speeds. It looks like they're basically the same with the exception of being able to split the lower range. They don't want us using the splitter very much there though, so I think it'll be a lot of fun getting to mess around with that when I'm finally in my own truck.

@regigilman2255

2 жыл бұрын

Practice with that 13 you have and remember you do not need to split every gear you can bypass the split and go directly to your next gear of choice Keeping in mind Traveling speed and engine speed you can master that Then you can drive any standard or manual vehicle Stay safe and be good to all that is around you out there 👍😊

@Turvok

Жыл бұрын

It's pretty rare that you actually need to split the basement. gears, only if ur pulling a steep hill or a heavy load. But generally i wouldn't recommend it unless you're really comfortable. If it's that steap of hill u may be better off just pulling it in the gear ur in.

You explained this like a real professional. Most people make it over complicated but you do help understanding it pretty easy.

I've learned so many different things from chanel creators and in many cases I've implemented those ideas and saved alot of money. I have never driven a semi but now a days understanding the basics in just about anything may be useful some day . KZread creators are fricken awesome . Thank you for making this video. I understood quite well what you explained.

I love

Perfect. I was nervous about driving a 18 speed. Never done so before and after watching this video on side of the road. After 30 min I was no longer nervous and love it. Many thanks!

Just getting into driving professionally and this video is the best one I’ve watched in turns of braking it down so someone new can understand

Shift it like a 13 speed until you get to the last two shifts, which shows 7th and 8th gear, then use the side splitter on those last two. Just remember to split on low or back before shifting down to the 8th then split again for your last gear for your highway speeds.

This actually made a great deal of sense. Thank you for taking 15 minutes to explain this to the world, this is just what i needed. Someone experienced and level headed to explain how this transmission works. I totally see why you would fall in love with it over time hah

@CoryJDraper

Жыл бұрын

Hey there, this trans is awesome, just takes a few days to grind some gears, then soon you'll shift without even thinking about it. Take it easy...

lol I like " there's never no reason to haul ass in reverse "

When I started out driving it was for an old tanker firm that only had ERF's with Eaton twin splits. Took a bit to get used to but once you've learned and it's a good worn in box it's the best. 👌

That was an excellent explanation. I used to drive a little 5 tonner here in New Zealand doing metro freight, 6 speed manual. Tried an 18 gear once. I cleaned the teeth in the gearbox more often than not. I heard many times that the eaton transmission was almost impossible to damage, one of the most forgiving transmissions out. You would be an excellent tutor for teaching ones like me how to drive a tractor trailer unit. Sounds like you've got the patience (to a certain level) to teach ones like me who clean the gearboxes teeth.

I literally have never ever in my life seen how a 18 speed works and after seeing this video i feel fully confident to jump into one. AMZAZING man, very well explained 👍🏽👍🏽👏🏽👏🏽

This gives a better understanding than a conversation with a woman!

I can finally say I understand how the Eaton 18-speed works thanks to your video. I read so many explanations on splitters and platters without being able to visualize how that would work...

First training tomorrow in a bobtail for a couple hours! Excited to get goin and used your video (repeat a few times) to get a better understanding of the process. Patience, relax, not that complicated! Haha - or so I hope! Thanks and looking forward to more of these types of videos

You're an excellent teacher, because I understood everything you explained, and I've never driven a truck in my life and only drove a manual yeeeears ago and not very well. I've always like learning a little bit about a skill others have mastered. And also having an understanding of what drivers of big rigs are doing technically , makes me want to give them some more room to do their thing and I do ! Well done.

@ToeCutter454

2 жыл бұрын

need to start sending all the SWIFT drivers here lol... we had one drop off a load on my overnight shift... ho boy where to start... they slammed into the bay on the third attempt, the first 2 they were too far off center to get the lift platform into it... he came inside like twice to see where he was... i told him the second time to just pull forward, put it in neutral and just roll it back... he gets back to his truck and i hear it spool up and shake and i yelled as loud as i could "TAKE THE BRAKES OFF!!!" lol my managers were facepalming... yea... that guy took literally 15 attempts to back up into our bay, the one time he pulled ALL the way out trying to re-center the trailer...

I used to always drive a 10 speed and a 13 speed. I love the 18 speed more options when you need it in the low range being able to split the low range unlike the 13 which only allows the splitting of the high range.

A driver just tried to explain this to me, guy left me in the milky way , thank you for bringing me back to earth brother .

Thank you for this video. Seriously. Been years since I drove an 18 speed. I got behind the wheel and immediately panicked as my brain went blank. This refresher helped beyond words. 🤘

THANK YOU SO MUCH BROTHA!!!!! You literally gave me my aha moment lol. Best explanation I’ve ever seen, I’ve only driven 10 speeds and just jumped into a 18 speed today for a new job and man after watching this I’m already comfortable. Now I have to rework my muscle memory for a 18 speed. Great video.

@Jake-xm6fl

2 жыл бұрын

Same

I'm gonna buy a bike tomorrow. This really helped!

@MedvedActual

2 жыл бұрын

Not sure how the bike fits into this, aside from just about all bikes being manual. Learning regular manual is pretty easy. Just learn the shift patter and play around w shift points.

Probably will never drive a semi but feel like I am certified to drive an 18 speed after watching this. Thank you

Looker this up to get a visual on what my grandfather was trying to explain. I ain't no trucker but the way this man created and explain the video I'm pretty sure I can now drive an 18 speed 😂

Took me over a year to love the 18 speed lol I shift it a little different tho but sometimes I do it like you doing it in the video. Now I’ve gotten use to shift every gear even as bobtail lol great video man!

@acebelgium4486

3 жыл бұрын

For those who don't know what a bobtail is it's just a tractor alone

Thank you. I've been driving a stick all my life, but never 18. I always wanted to learn. This really made it very easy to understand.

@orcenx

4 жыл бұрын

its the same as a 13 you just split the bottom too... i doubt anyone splits the bottom anyway in the US.. In Canada our loads are actually heavy

Your explanation of the shifting procedure and transmission operation is very good, anyone who saw this video should have no problem understanding what you are explaining. It’s been 40 years since I have drove a truck, and it was only a 5 speed with a 2 speed differential.

Sir, thank you so much I've watching countless videos on shifting 18 spd and you really simplified the function of the splitter and how it splits every gear and when to engage it. Now I understand 👍

About to start a tanker job in Texas. I never seen an 18 speed truck & I'm gonna have to use those when I start this job. I literally thought they were 18 actual gears & was a bit worried. This video made me feel way better & more confident now. The explanation is awesome. Now I can't wait to try it out, Thanks! Definitely earned my subscription sir!

@can1beatme

Жыл бұрын

What part of Texas are you gonna be hauling bro? Same here, never driven a 18 speed. Need some help. I’m gonna be hopefully hauling Frac.

"Never a reason to haul ass in reverse". Hahahah that needs to be on a shirt.

@bugnut82

4 жыл бұрын

ddd ddd I laughed when he said that ! That is a great slogan !

@KillinReapers

4 жыл бұрын

*proceeds to tell you how to do it. Lol

@ThePaulv12

4 жыл бұрын

I broke the rule. I did it today AND on purpose!

@femaleprofessionaldriver7650

4 жыл бұрын

Yes, that was hilarious. I'm gonna do a whole load in reverse!!!👺👺👺👺

@DDyke

4 жыл бұрын

@@femaleprofessionaldriver7650 are you trucker?

this is the best video I have seen yet on shifting at 18 speed - thank you for this great explanation

@CoryJDraper

15 күн бұрын

You got it!

Very well explained Cory!!! Confidence level just went way up and now im excited to get into the truck rather than nervous

Excellent video Cory! This is the best I've seen for operating an 18 speed. Just got a job driving a logging truck but I learned on an Eaton super 10 so this really helped out a lot!

@CoryJDraper

Жыл бұрын

Right on! Thanks for watching...

As someone who has only experienced a 10 speed I've always wondered how that side splitter worked. This is the first time my question has been answered. Thanks man.

@Lilljohn001

3 жыл бұрын

With a 10 speed the gray knob forward you would not be able to shift into fifth...

@naytj511

3 жыл бұрын

The switch on the side is called the RANGE

You make it sound quite do -able to someone who is starting out...you are so clear,yet without sounding doom and gloom if a duff shift occurs...good video and good voice-over

Thank u very much Gory, I drove 13 speed with flip. Now that I m about start my 18 speed, ur tutorial video did help me and realize that it’s just like the 13speed I drove before. Thanks again and u got my subscription

Thank you for making these videos especially about the automatics and going down that steep downgrades in winter

@llfloki__7786

4 жыл бұрын

r

@c.a.mcneil7599

2 жыл бұрын

Click bait. I know ma y real truck drivers thT skip gears especially the lower end. Thumbs down....

Great video. I think alot of people are afraid of the side selector because they just don’t know how beneficial it is. But like you said in the beginning, it is so addictive once you learn to use it. Especially if you can float gears. It makes driving so much easier. And for me, it’s fun to float thru all those gears.

@CoryJDraper

Жыл бұрын

18-speed is the best if you use a manual. Now almost all new trucks are automated so these trans are harder to find...

I understand that you’re trying to stay humble by saying you’re not good at tutoring, but I I’ll tell you what: I subscribe to your channel because you have the teaching skills. You put yourself in an ignorant shoes and it works. Congratulations brother. Very helpful.your way is so far the more practical.🙏🏿🙏🏿

I've seen a lot of KZread videos on how to learn how to drive a truck, but no one clearly explains it. and, I don't know anything about 18 speeds and You simply showed us in ten minutes, Thanks.

I imagine you’re one hell of an appreciated trainer/instructor or once was.

I’m looking at buying a truck with an 18 speed. I think I might look a little more into it now. Thanks for making this video!

This is great information. Learned to drive using a ten speed, starting a new job soon that used 13 and 18s.

Well put. This is the best video of this that I’ve seen. With this explanation it’s easy to see how an 18 speed can be just as easy as any other. Thanks for putting this together.

That was a better explanation than I received from the yard when I went from 13 to 18. Retired 15 years almost.

@c.a.mcneil7599

2 жыл бұрын

And why need to split bottom were you 100k. I skip so many lower gears at 80k. Maybe your drove a neutered truck. Is that how you roll

I'm about to apply to a local CDL school in the next day or two, and I was a bit intimidated about the possibility of driving an 18-speed manual transmission. Doubly so since I've never even driven a regular car with a manual transmission, though I do understand the theory pretty well. This video was a tremendous help in soothing those nerves. Thank you so much.

@alexpadilla2319

10 ай бұрын

How did you do bro, I’m starting trucking school soon

@NoobsofFredo

10 ай бұрын

@@alexpadilla2319 Passed with flying colors back in May in a 10-speed manual, and about to have orientation at my first trucking job this coming Wednesday. Had to go to Swift because I rear-ended a guy back in 2020, but at least any stupid shit I manage to do won't tarnish a good company's reputation until that falls off in a few months. Anyways, definitely let me know how your own schooling goes! I'm keen to hear.

I usually drive a 8 speed tri axle I’m working for a friend today he told me I have to drive his brand new389 Pete 18 speed I was a little nervous never drove a 18 speed watched your video drove that truck like a boss thanks very informational 🤘

Awesome explanation and video I’ve been driving for 21 years and I’m going into the oilfield into a 389 18 speed and after watching I’m ready

I plan on getting into trucking here pretty soon. Gonna take my permit test Friday. Ive been driving manual cars since I started driving but the most complex thing I ever drove was a 6 speed with a reverse safety lol. This video was well thought out. Hopefully I pick it up quickly once I get in one.

@justwowmanplays2941

Жыл бұрын

One year later, just wondering over here how your journey into trucking went? I'm about to jump in and get my class 1 training in Canada, couldn't be more excited for a career change!

@TheShanesousley

Жыл бұрын

@@justwowmanplays2941 I got my CDL in March and had to get the manual restriction off. Id stay away from company based schools. Idk if that's a thing in Canada. I liked otr but with young kids I decided the timing wasnt right. It's a lot of fun though. Good luck!

This the best explaining ever I was so afraid to drive a 18 speed but I made it so much easier thank u coming from the Bahamas 🇧🇸

Thanks Mate, just learning Road Ranger here in Sydney Australia, best video I've seen, nice and easy and straightforward. Thanks again.

I just got a new job and have been stressing because i've never driven a 18 speed transmission. this video has been very informative and I feel allot more confident for work next monday! Thanks allot

Thank you Cory, you made it seem so easy. I'll be driving 18 gear for the first time. You've made me feel more at ease, thank you, God bless.

Best verbal breakdown on the web. Thank you.

Super easy explanation!!! I'm good to go now! I appreciate you! Getting ready to go driving soon. Fresh from school, trying to figure out how will take me on .

There's also a secret 19th gear....Granny low in high range. when unloaded it enables you to stay in high range be able to take off in about the equivalent of 3rd gear and go straight to 5th without having to go through the first 4 gears and change to high range. good for pulling out into high speed traffic and getting out of your own way. but you can only use this secret gear combo when your empty/solo or else you'll shave some life off your clutch. you can also split the the transition from granny high to 5th to ease the rpm transition.

@brandonleekainoakealoha2330

2 жыл бұрын

Hahahaha I’ve tried teaching this trick to some of my veteran drivers and they look at me like wtf ??? Scratching their heads

@michaellake5269

Жыл бұрын

Good point. I used to do that in a 2 stick Mack just for fun.

Damn but you explained this awesomely my guy. I actually understood that whole explanation, feel more confident on trying get a CDL now.. thanks bro 😎🤙

Dude awesome video. I have been driving for 20 years. And have never been in a position to need to drive an 18 speed., Always have been scared of them. Man I never knew it was that simple. Thanks so much.

This is an excellent explanation! I'm a new driver (10 months exp) who wants to learn manual. Most of the trucks im interested in buying in the future are either 10 or 18 speed. Honestly I want a truck that isnt required to get all that emissions crap on it, so like pre 2006? and those are 100% manual transmissions. great video! noone ever laid it out like this.

I loved driving an 18 speed. Now try to explain float shifting up and down lol great job my friend.

@camilojimenez623

2 жыл бұрын

18 speed is so much better

Excellent tutorial regardless of the 13 minutes. It's great how you explain every gear, what to expect and how to split. You need to become an instructor for real. 💯💪

Thank you very much @Cory Draper for an awesome 18sp explanation!! I've personally never driven an 18sp but i really hope in the near future to do so. I have only driven 8sp and 10sp and i think i drove a 13spd once or twice. I hope maybe one day i can drive a 389 18spd. Blessings to you. 👍

Bruh this is real truck class no joke...big up from Jamaica

I’ve only drove a 10 and a 8 about to switch to either a 13 or 15 I think and I’ve been nervous you’ve really made it a little easier to finally give it a try!

@militaryveteran6185

2 жыл бұрын

Try a 15 double over or a 6 & a 4!

You explained that so well, I feel like could drive one right now....and I've never driven a tractor/trailer!

@richardsokolis7314

2 жыл бұрын

Shifting is the easy part. Dealing with idiots on the road never goes away.

Thank you for sharing.. I will be hopping in 18speed next week and starting heavy haul and was kinda nervous till I came across your video 👌

I been driving 6-10 wheelers for 8 years now never had the chance to drive a manual truck thanks to company trucks being mostly autos nowadays, always wanted to drive a manual so this deff helped me have a better idea once I finally get into one 🤘🏻

Sir. This was extremely helpful. You where very detailed and it helped me to understand thank you very much for putting this video out.

@franco4201

3 жыл бұрын

I was like what in da F st first but I watched over a few times n I understand. Explained very well thanks

Thank you sir. I thinking 🤔 of getting into trucking soon. Thanks for passing knowledge sir.

This is the first video explained in excellent way how to shift the 18 speed.. thank you

I appreciate this!! I’ve never driven 18 before only 10.. but the truck im about to purchase is 18 and this made me a lot more confident bout the change to 18!! Thank you!!!!

Great explanations brother. Thank you very much! I'm heading to CDL school this coming week on Monday. Unfortunately they only train on automatic, but I plan to learn manual 18 speed on my time through a relative or another private schooling. It's my true ambition to be shifting one of those in a tanker, but gotta get my foot in the door anyway I can right now. Once again thank you for doing this video. Sincerely, NeVMeV

@MrEddie426

4 жыл бұрын

What is this "cdl school" I keep hearing about? Just borrow a buddies truck or rent one if you have too and head over to the local DMV that test for commercial licences and take the test.....it's only around $100 here in Texas as opposed to multiple thousands if you go threw school.....just my 2 cents

@randymoran67

3 жыл бұрын

@@MrEddie426 Typical shitty trucking companies won't hire these so call graduates! (My insurance wouldn't allow )x amount of hours time behind the wheel and x amount of class time ! One has to start somewhere ! Lol! Schneider swift werner ( shitty companies lol) from a retired 8 truck 16 trailer operator with my own authority! Just saying 🙂

Great video! I'm looking into getting my CDL and I definitely wanted to get a hang of this first. I can't wait. Thank you for this!

Today I can say, I always wondered how this thing works. Can't thank you enough! Very well explained!!!

Thanks from this aspiring new driver. You sound like a great teacher.

Spent my life with a 13-spd. Loved it. Could never see why low range needed to be split, most guys skip those anyway. Where you really need that little boost is only on the highway in hi range anyway.

@theguyinmaine

Жыл бұрын

Hauling heavy from a dead stop on a hill, splitting with the engine brake you can continue gaining speed, it's easier on the running gear and keeps you in a good torque range.