How To Setup Ubiquiti Nano Station M2 - Access Point
Жүктеу.....
Пікірлер: 25
@finthegeekАй бұрын
Thank you so much, i wasted 2 hours before finding your tutorial and it just worked
@kcalp21Ай бұрын
Completely forgot about the airMAX! thank you.
@ericjeroenjansen9 ай бұрын
Thanx for the clear explanation, got it finally working.
@cotehwordplayspokenword Жыл бұрын
You’ve explained so well 👏 👏 how about point to point and not Access point
@lalo9619
2 ай бұрын
any follow up on this?
@lalo9619
2 ай бұрын
I just did one yesterday so one needs to be set to access point and the other to Station I was using tightVNC to stream host display to station but it took a long time for me to figure out how to make it work correctly. To be honest I’m not exactly sure what I did to fix it because I repeated and repeated steps to go from listen mode when things would not connect on tight VNC.
@patlyrics5926 Жыл бұрын
nice tutoria tysm!!
@honeyyt49 Жыл бұрын
the video is very useful
@woolfy026 ай бұрын
I have 2 setup in PTP / AP repeater mode.(One on the side of my patio and the other on the barn for internet) It works great but, I'm not able to login to each individual nano station, to change the settings while connected to the wifi. (Right now, I just connect to each via the ethernet cable). Is this possible to have it setup like that? I noticed none of the Ubiquiti server stuff, doesn't show the networks unfortunately.
@thegiannis36326 күн бұрын
Even though im doing the first steps correctly(my cables are all working properly) i cannot ping the device in order to login. Any help?
@user-wv8lk9ri9y27 күн бұрын
Is there any problem when i put country USA and am not from that region?
@yusuphikram7906 Жыл бұрын
Wow
@buki3004 ай бұрын
Nice thanks
@odilijacob97694 ай бұрын
Cool
@77lepi3 ай бұрын
have had such an antenna for about 5 years. I have never changed anything since I made the connection between them. now I'm noticing that for the last 7 days I'm losing my internet connection, or my downloadig drops from 60MB/s to 0 Mb/s for seconds to a few minutes, then the connection is established at 14Mb/s for a while, then it rises to 60 and so on. In short, the connection fluctuates or I don't have it at all. does the code have such a problem or has it broken down after all these years?
@77lepi
3 ай бұрын
and upload is always full 60Ms/s
@under30smindАй бұрын
do one for mikrotik
@bargainsstoragedeals36539 ай бұрын
Thank you
@howto658
9 ай бұрын
Most welcome 🙂
@bargainsstoragedeals3653
9 ай бұрын
@@howto658 worked perfect was having a bit of a nightmare when I did it all worked but did not connect to the internet so thanks
@CHELEGANABSKI Жыл бұрын
When I type ubnt in password or username place it said it's wrong. Can you help me about it
@howto658
11 ай бұрын
Try this There are three default passwords: 1. Username: ubnt Password: ubnt 2. Blank; no username or passwords, login blank 3. Username: admin Password: admin If it doesn’t work, try resetting the AP and try again with these password.
@yashawan-banyasharahla2594 Жыл бұрын
Password not user name is not working for me
@howto658
Жыл бұрын
There are 3 default passwords. 1. Username: ubnt Password: ubnt 2. Blank; no username or password, login directly 3. Username :admin Password: admin If it doesn't work, try resetting the AP and try again with these password.
Пікірлер: 25
Thank you so much, i wasted 2 hours before finding your tutorial and it just worked
Completely forgot about the airMAX! thank you.
Thanx for the clear explanation, got it finally working.
You’ve explained so well 👏 👏 how about point to point and not Access point
@lalo9619
2 ай бұрын
any follow up on this?
@lalo9619
2 ай бұрын
I just did one yesterday so one needs to be set to access point and the other to Station I was using tightVNC to stream host display to station but it took a long time for me to figure out how to make it work correctly. To be honest I’m not exactly sure what I did to fix it because I repeated and repeated steps to go from listen mode when things would not connect on tight VNC.
nice tutoria tysm!!
the video is very useful
I have 2 setup in PTP / AP repeater mode.(One on the side of my patio and the other on the barn for internet) It works great but, I'm not able to login to each individual nano station, to change the settings while connected to the wifi. (Right now, I just connect to each via the ethernet cable). Is this possible to have it setup like that? I noticed none of the Ubiquiti server stuff, doesn't show the networks unfortunately.
Even though im doing the first steps correctly(my cables are all working properly) i cannot ping the device in order to login. Any help?
Is there any problem when i put country USA and am not from that region?
Wow
Nice thanks
Cool
have had such an antenna for about 5 years. I have never changed anything since I made the connection between them. now I'm noticing that for the last 7 days I'm losing my internet connection, or my downloadig drops from 60MB/s to 0 Mb/s for seconds to a few minutes, then the connection is established at 14Mb/s for a while, then it rises to 60 and so on. In short, the connection fluctuates or I don't have it at all. does the code have such a problem or has it broken down after all these years?
@77lepi
3 ай бұрын
and upload is always full 60Ms/s
do one for mikrotik
Thank you
@howto658
9 ай бұрын
Most welcome 🙂
@bargainsstoragedeals3653
9 ай бұрын
@@howto658 worked perfect was having a bit of a nightmare when I did it all worked but did not connect to the internet so thanks
When I type ubnt in password or username place it said it's wrong. Can you help me about it
@howto658
11 ай бұрын
Try this There are three default passwords: 1. Username: ubnt Password: ubnt 2. Blank; no username or passwords, login blank 3. Username: admin Password: admin If it doesn’t work, try resetting the AP and try again with these password.
Password not user name is not working for me
@howto658
Жыл бұрын
There are 3 default passwords. 1. Username: ubnt Password: ubnt 2. Blank; no username or password, login directly 3. Username :admin Password: admin If it doesn't work, try resetting the AP and try again with these password.