Te agredesco mucho en serio me ayudaste a solucionar 5 antenas nanostation m5 muchicimas gracias te ganastes un suscriptor mas
@arielsamec19 күн бұрын
Thank you so much! It worked. Salutes from Argentina
@cctvjhbali535819 күн бұрын
Nice thanks a lot from "Bali" brother🙏🙏
@thegiannis36329 күн бұрын
Even though im doing the first steps correctly(my cables are all working properly) i cannot ping the device in order to login. Any help?
@user-wv8lk9ri9yАй бұрын
Is there any problem when i put country USA and am not from that region?
@bocamaidenАй бұрын
You saved my life! Thanks a lot!
@under30smindАй бұрын
do one for mikrotik
@ruslan1132Ай бұрын
Працює дякую
@guillermobar5915Ай бұрын
Gracias.. Ya me estaba volviendo loco 👍👍👍
@kcalp21Ай бұрын
Completely forgot about the airMAX! thank you.
@finthegeekАй бұрын
Thank you so much, i wasted 2 hours before finding your tutorial and it just worked
@K-H-983 ай бұрын
Need de laptop wifi connection ? Browser keep saying -Adress_unreachable
@77lepi3 ай бұрын
have had such an antenna for about 5 years. I have never changed anything since I made the connection between them. now I'm noticing that for the last 7 days I'm losing my internet connection, or my downloadig drops from 60MB/s to 0 Mb/s for seconds to a few minutes, then the connection is established at 14Mb/s for a while, then it rises to 60 and so on. In short, the connection fluctuates or I don't have it at all. does the code have such a problem or has it broken down after all these years?
@77lepi3 ай бұрын
and upload is always full 60Ms/s
@odilijacob97694 ай бұрын
Cool
@jorgeviera9134 ай бұрын
gracias
@buki3004 ай бұрын
Nice thanks
@tebonouabdel-latif66135 ай бұрын
Thank u very much. It work for me.
@Muhayyo6666 ай бұрын
I did the same process and still same issue. I have stable internet connection but cannot access the ip
@mosesirhirhi12654 ай бұрын
Same here
@Muhayyo6664 ай бұрын
@@mosesirhirhi1265 tell me if it works for you anyway bro
@woolfy026 ай бұрын
I have 2 setup in PTP / AP repeater mode.(One on the side of my patio and the other on the barn for internet) It works great but, I'm not able to login to each individual nano station, to change the settings while connected to the wifi. (Right now, I just connect to each via the ethernet cable). Is this possible to have it setup like that? I noticed none of the Ubiquiti server stuff, doesn't show the networks unfortunately.
@manotasdm37 ай бұрын
Excelente, recupere todo.
@jhoncop91587 ай бұрын
Thank you so much
@user-ib8hp5xp2r8 ай бұрын
Спасибо!!! Просто спас!
@xharlyeeleazar95698 ай бұрын
Mas de una mes buscando información al respecto y tu video me salvo la vida... excelente Bro. Saludos desde Veracruz México :D
@doziechineme67608 ай бұрын
How do i configure M2 for one to be an AP and the other an AP repeater
@ericjeroenjansen9 ай бұрын
Thanx for the clear explanation, got it finally working.
@simomaataoui52969 ай бұрын
thanks bro ❤
@bargainsstoragedeals36539 ай бұрын
Thank you
@howto6589 ай бұрын
Most welcome 🙂
@bargainsstoragedeals36539 ай бұрын
@@howto658 worked perfect was having a bit of a nightmare when I did it all worked but did not connect to the internet so thanks
@gauravojha73629 ай бұрын
Yes solved, thanks from India. How to use as router ?
@trinche65710 ай бұрын
Me aparece “sec error unknown issuer" que hago?
@ioeta643010 ай бұрын
Gracias, tenia 2 Dias Intentando hacer lo que tu has realizado en 2:56 Minutos.
@howto65810 ай бұрын
You are most welcome . Please like, share and subscribe
@danielchamam903511 ай бұрын
Works! thank you...
@matteoriccardi1081 Жыл бұрын
you are the best! thanks!!!
@howto65811 ай бұрын
Most welcome. Thank you for the support ✌️
@CHELEGANABSKI Жыл бұрын
When I type ubnt in password or username place it said it's wrong. Can you help me about it
@howto65811 ай бұрын
Try this There are three default passwords: 1. Username: ubnt Password: ubnt 2. Blank; no username or passwords, login blank 3. Username: admin Password: admin If it doesn’t work, try resetting the AP and try again with these password.
@yashawan-banyasharahla2594 Жыл бұрын
Password not user name is not working for me
@howto658 Жыл бұрын
There are 3 default passwords. 1. Username: ubnt Password: ubnt 2. Blank; no username or password, login directly 3. Username :admin Password: admin If it doesn't work, try resetting the AP and try again with these password.
@patlyrics5926 Жыл бұрын
nice tutoria tysm!!
@honeyyt49 Жыл бұрын
the video is very useful
@alekseydmitriev2031 Жыл бұрын
THANKS U VERY MUCH !!! единственный толковый ответ на проблему, после просмотра кучи русских сайтов и расуждений
@salomoncruz3281 Жыл бұрын
Where does the mac addres of the other side comes from? Were to find it?
@howto658 Жыл бұрын
Both the AP has it’s own MAC address You need to login to both APs and keep note of Mac address of both of them
@inyourheadmf Жыл бұрын
WORKS!!! THANKS U VERY MUCH🎉❤
@cotehwordplayspokenword Жыл бұрын
You’ve explained so well 👏 👏 how about point to point and not Access point
@lalo96192 ай бұрын
any follow up on this?
@lalo96192 ай бұрын
I just did one yesterday so one needs to be set to access point and the other to Station I was using tightVNC to stream host display to station but it took a long time for me to figure out how to make it work correctly. To be honest I’m not exactly sure what I did to fix it because I repeated and repeated steps to go from listen mode when things would not connect on tight VNC.
Пікірлер
Perfecto 👌
Te agredesco mucho en serio me ayudaste a solucionar 5 antenas nanostation m5 muchicimas gracias te ganastes un suscriptor mas
Thank you so much! It worked. Salutes from Argentina
Nice thanks a lot from "Bali" brother🙏🙏
Even though im doing the first steps correctly(my cables are all working properly) i cannot ping the device in order to login. Any help?
Is there any problem when i put country USA and am not from that region?
You saved my life! Thanks a lot!
do one for mikrotik
Працює дякую
Gracias.. Ya me estaba volviendo loco 👍👍👍
Completely forgot about the airMAX! thank you.
Thank you so much, i wasted 2 hours before finding your tutorial and it just worked
Need de laptop wifi connection ? Browser keep saying -Adress_unreachable
have had such an antenna for about 5 years. I have never changed anything since I made the connection between them. now I'm noticing that for the last 7 days I'm losing my internet connection, or my downloadig drops from 60MB/s to 0 Mb/s for seconds to a few minutes, then the connection is established at 14Mb/s for a while, then it rises to 60 and so on. In short, the connection fluctuates or I don't have it at all. does the code have such a problem or has it broken down after all these years?
and upload is always full 60Ms/s
Cool
gracias
Nice thanks
Thank u very much. It work for me.
I did the same process and still same issue. I have stable internet connection but cannot access the ip
Same here
@@mosesirhirhi1265 tell me if it works for you anyway bro
I have 2 setup in PTP / AP repeater mode.(One on the side of my patio and the other on the barn for internet) It works great but, I'm not able to login to each individual nano station, to change the settings while connected to the wifi. (Right now, I just connect to each via the ethernet cable). Is this possible to have it setup like that? I noticed none of the Ubiquiti server stuff, doesn't show the networks unfortunately.
Excelente, recupere todo.
Thank you so much
Спасибо!!! Просто спас!
Mas de una mes buscando información al respecto y tu video me salvo la vida... excelente Bro. Saludos desde Veracruz México :D
How do i configure M2 for one to be an AP and the other an AP repeater
Thanx for the clear explanation, got it finally working.
thanks bro ❤
Thank you
Most welcome 🙂
@@howto658 worked perfect was having a bit of a nightmare when I did it all worked but did not connect to the internet so thanks
Yes solved, thanks from India. How to use as router ?
Me aparece “sec error unknown issuer" que hago?
Gracias, tenia 2 Dias Intentando hacer lo que tu has realizado en 2:56 Minutos.
You are most welcome . Please like, share and subscribe
Works! thank you...
you are the best! thanks!!!
Most welcome. Thank you for the support ✌️
When I type ubnt in password or username place it said it's wrong. Can you help me about it
Try this There are three default passwords: 1. Username: ubnt Password: ubnt 2. Blank; no username or passwords, login blank 3. Username: admin Password: admin If it doesn’t work, try resetting the AP and try again with these password.
Password not user name is not working for me
There are 3 default passwords. 1. Username: ubnt Password: ubnt 2. Blank; no username or password, login directly 3. Username :admin Password: admin If it doesn't work, try resetting the AP and try again with these password.
nice tutoria tysm!!
the video is very useful
THANKS U VERY MUCH !!! единственный толковый ответ на проблему, после просмотра кучи русских сайтов и расуждений
Where does the mac addres of the other side comes from? Were to find it?
Both the AP has it’s own MAC address You need to login to both APs and keep note of Mac address of both of them
WORKS!!! THANKS U VERY MUCH🎉❤
You’ve explained so well 👏 👏 how about point to point and not Access point
any follow up on this?
I just did one yesterday so one needs to be set to access point and the other to Station I was using tightVNC to stream host display to station but it took a long time for me to figure out how to make it work correctly. To be honest I’m not exactly sure what I did to fix it because I repeated and repeated steps to go from listen mode when things would not connect on tight VNC.
you are a genius
Wow
You are a genius thank you
Thank you