u did a great job : just what we needed, no expensive software nor time consuming editing on ur side, just the essentials thanks !

Hi Thanks, can homebase 3 do continuous recording if extra storage is added eg CCTV Thanks

@Wanderer001_Reviews_Clips

Жыл бұрын

It can not. Meant to just store clips from cameras attached to it.

So I have a mesh network which covers the whole house and my outdoor patio. However, when I do the setup, it wants it to connect to the router Wi-Fi. After I do that, I cannot connect my additional cameras to the hub unless they are on the safe Wi-Fi signal. Any way around that?

@mikesantos9069

2 ай бұрын

Lo resolviste ? Tengo el mismo problema …. Ayuda

Thank you for the video. Does the home base have to stay connected via the Ethernet cable to the modem all the time?

@Wanderer001_Reviews_Clips

10 ай бұрын

After the setup processes the Home base can be set to operate over WiFi, letting you place it a little better then if it had to be connected to Ethernet.

@iamviewer

2 ай бұрын

I've seen a video where it's said that when the homebase is connected to WiFi, it won't record 24/7 feeds, just clips (like motion detected event etc.) is it true ?

Hi. Do you know how can I check the signal strength after installing the camera? I want to look for the best placement with a high signal strength but I don't know how to see that option that appeared during the installation of the camera. Thank you

@Wanderer001_Reviews_Clips

Жыл бұрын

There is a little icon when you click into the settings for the camera next to the charging icon should look like a wifi signal icon. this shows you the strength of the connect. It is not as good as the one during setup but should give you a pretty good idea.

@EddyBenalal

Жыл бұрын

@@Wanderer001_Reviews_Clips Thank you. I saw that one but I thought that I could reach the one during the setting of the camera. Thank you for taking care!

Hi, can you connect this to an external monitor as opposed to only being able to view the camera on your phone?

@Wanderer001_Reviews_Clips

Жыл бұрын

You can not. Eufy does have a web portal but you will need a actual computer to look at it.

I just received our new home base 3 we currently have a home base 2 with 3 cam2 cameras currently working. Do i have to take them all down and hold them near the new home base 3 and reinstall them again?

@Wanderer001_Reviews_Clips

5 ай бұрын

You may be able to leave them in place, I just happened to need to move these closer to get them to pair.

I am planning to buy eufy cam 3 4k. I want to install one outside and one inside the house. Will ot work the one inside the house ? Even there is no sunlight direct to the solar panel.

@Wanderer001_Reviews_Clips

Ай бұрын

It would work but it would not keep the battery topped off if it does not have access to sun light.

Hi please can I ask if the home base has a built in fan? Is it noisy?

@Wanderer001_Reviews_Clips

10 ай бұрын

No fans, just vents. Very silent. The most I hear is the hard drive spinning up in it from time to time.

how many meters can the camera can conect the home base i ean the distace between them

@Wanderer001_Reviews_Clips

8 ай бұрын

Very dependent on wall type it needs to go through but I have had it as far as 21.81 m when I was testing.

Question, dose the camera connect to the homebase directly or via the network? Means can i hide the homebase somewhere at the house where it’s connected to the network and the camera outside connected to the same network? Or the video feed going directly from the camera to the base without going to the home router? Other question do you know if it’s still not supported with iCloud+? Thanks

@Wanderer001_Reviews_Clips

11 ай бұрын

The home base after setup does not need to be hardwired to your access point after set up. It can connect over wifi. The means you can place it where you like after the fact. Cameras connect over the homebase not your access points wifi. iColud is not supported as far as I know.

@hybridmods4228

5 ай бұрын

@@Wanderer001_Reviews_Clips so to be clear i have to plug it up to the router via ethernet but than after everything is setup, i can unplug the base from the router and still access cameras and recordings with the app? My router is full so i dont have another port to keep the base plugged in.

@Wanderer001_Reviews_Clips

5 ай бұрын

@@hybridmods4228 There is an option in the app that you will have to change first. But after that the home base can work over WiFi without taking up a port on your router.

@philsisson195

4 ай бұрын

I wish EUFY would get their stuff together because one of their experts told me that the cameras connect to Wifi and from there, they go to the homebase and the hard drive. @@Wanderer001_Reviews_Clips

@alicanyasar

3 ай бұрын

@@Wanderer001_Reviews_Clips After the first wired setup, does it have to connect the same internet from the router if want to use WiFi? Or another internet connection from another router could be used?

Can you plug the homebase to your existing router or does it require a special router box.

@Wanderer001_Reviews_Clips

Жыл бұрын

Yes you can. You do not need an extra device that it plugs it into.

@tabithakadri9152

Жыл бұрын

Thankyou!

Hi i have a old eufywireless doorcam 2k after i changed broadband now my chime cannot sync to the doorbell cam. I want to ask if i buy the homebase 3 that i can connect that to my doorbell cam and then have my echo 8 as a chime

@Wanderer001_Reviews_Clips

9 ай бұрын

I know this might be making this very simple but when you changed broadband providers did they use the same wifi name and password you had setup before?

@Secret_staycation21

9 ай бұрын

@@Wanderer001_Reviews_Clips No all the details of username and password was changed so I removed the doorbell and chime from the eufy app then when I tried to set it up again on the new broadband the doorbell does not syc to the chime anymore

@Wanderer001_Reviews_Clips

9 ай бұрын

@@Secret_staycation21Did you get a new wifi access point? Might need to try moving it closer to it durning setup. I know I have used a few things like that in the past that needed to almost be right on top of my old setup.

Can you do a video of how to add older eufy cameras to home base 3?

@Wanderer001_Reviews_Clips

Жыл бұрын

Is there one in particular you were looking for. Right now it seems that the cameras that they said would be compatible with the Homebase 3 will not bet getting an update until mid 2023 now.

@kyoung3482

Жыл бұрын

@@Wanderer001_Reviews_Clips I have the E210, S220 Indoor Cam, Solo IndoorCam C24,, & S230 SoloCam S40. I was under the impression these will be available to connect to Home Base by March

@Wanderer001_Reviews_Clips

Жыл бұрын

@@kyoung3482 That was the orignal plan from eufy but seems that things have been pushed back.

@Demicron

Жыл бұрын

Ah maybe this is my issue I have the newest flood.light cams and the 360

Does this device work with Apple HomeKit?

@Wanderer001_Reviews_Clips

Жыл бұрын

It does not.

What brand/model router are you connecting hb3 to? Also what id the color of the led light at the back where you plug into Ethernet cable? My current router is Tp link a7 archer and hb3 is not able to connect to router via Ethernet cable. Other all devices are able to connect.

@Wanderer001_Reviews_Clips

Жыл бұрын

I was using the ASUS RT AX88U to connect to the HB3. The color of th light where I connected the HB3 to my Asus was flashing green and amber shwoing data passing.

Hi Question, does that mean that when I installed the cam into the Homebase 3, I can use this camera to other locations like the homebase is at my home and the camera is at my office, as long as it is connected to the internet?

@Wanderer001_Reviews_Clips

10 ай бұрын

No, the camera and home base need to be on the same wifi network in order to work.

@Khalixer97

9 ай бұрын

@@Wanderer001_Reviews_Clips thank you for the clarification

@Khalixer97

9 ай бұрын

@@Wanderer001_Reviews_Clips another question, it can use wifi after setting up with using the ethernet cable connectes to the router? And then the cameras can be connected to the homebase within the same local network?

@Wanderer001_Reviews_Clips

9 ай бұрын

@@Khalixer97 Yes that is correct.

@Khalixer97

9 ай бұрын

@@Wanderer001_Reviews_Clips Hi its me again, lets say we have 3 rooms with different routers, but the routers are like access points they still have the same default gateway, the cameras can still be connected to the homebase 3?

Hello my friend, I just bout the 3c system and i keep receiving notifications from camera because of the TV , how can i stop notifications coming because of TV

@Wanderer001_Reviews_Clips

8 ай бұрын

When you say you get notifications from your tv is that because the camera is pointed at the TV?

@mhmdsulami

8 ай бұрын

⁠yes , the TV is in the living room and the camera detects the faces and motion in the TV and send me notifications

@Wanderer001_Reviews_Clips

8 ай бұрын

@@mhmdsulami If you set up a detection zone that avoids the area with the tv this will stop it from sending you notifications.

@mhmdsulami

8 ай бұрын

@@Wanderer001_Reviews_Clips thanks a lot it works great now 👍🏼

@Wanderer001_Reviews_Clips

8 ай бұрын

@@mhmdsulami Good to hear it is working for you now.

How do you then connect Homebase to the router via wireless? I could not find a wireless option on my unit.

@Wanderer001_Reviews_Clips

Ай бұрын

You need to set it up via hard-wired first. Then, you will get the option for wifi after you do a firmware update.

@gilltim5711

Ай бұрын

@@Wanderer001_Reviews_Clips Interesting. I did initially hard wire to my router and set up the cameras, then disconnected hard wire and moved my Homebase across the house to the window closest to the camears. Then I looked on my software on my iphone, but did not see an option for wireless. I'm guessing I should have looked for this option while Homebase was still wired to the router?

@Wanderer001_Reviews_Clips

Ай бұрын

@@gilltim5711 Yes that is correct. It still needs to be wired to select the option to be wireless.

@gilltim5711

Ай бұрын

@@Wanderer001_Reviews_Clips Thanks! 😀

Hi. remove camera from home base and now cant connect to home base. My camera not doing beep after i press sinc baton. Maybe can help someone? Because eufy support not helping to me. Because i buy camera not from eufy authorized store... thanks.

@Wanderer001_Reviews_Clips

10 ай бұрын

You can try powering on and off the home base 3 then try paring the camera after that.

@600lorinser

10 ай бұрын

@Wanderer001_Reviews_Clips i try everything what i can... :)

@Wanderer001_Reviews_Clips

10 ай бұрын

@@600lorinser Is the home base connected via eithernet? Could also try fulling charging the camera as well. I know I had issues with mine and had to hold it oddly to get it to pair up as seen here: kzread.info/dash/bejne/fJuB2qixkZqsgM4.htmlsi=S43FuxWfMJyrG-fW&t=175.

Is it eligible Apple HomeKit ?

@Wanderer001_Reviews_Clips

4 ай бұрын

It is not.

My friend its me again 😅, all of a sudden the homebase has restarted on its own and nothing appears on the app . Now when i try to setup the system and add the homebase i get this message “unabel to add homebase3” even though I followed all the steps it fails at the last step “ press the SYNC/ALARM button untill it beeps “ and it does but then nothing happens! I even tried using the reset button still nothing happens! Thank you for your support.

@Wanderer001_Reviews_Clips

8 ай бұрын

That might be a little beyond what I can help. You hit the areas that I would have suggested looking into. At this point it might be time to contact eufy tech support.

Can homebase unit be connected on wifi rather then cable

@Wanderer001_Reviews_Clips

4 ай бұрын

After you first set it up you can select to use it over wifi in the app.

@marcellafalzon9431

4 ай бұрын

@@Wanderer001_Reviews_Clips I have done so but it keeps going and saying cameras off line I even bought deco mesh pods - is it because it’s on wifi

@Wanderer001_Reviews_Clips

4 ай бұрын

@@marcellafalzon9431 It could be that it is taxing your wifi connection too much. Depends on how many things you have connected over wifi as well as how good your wifi router is.

I csnt my flood lights to pair with the home base....

@Wanderer001_Reviews_Clips

Жыл бұрын

Only a small set of cameras are compatible with the home base 3. Eufy is slowly making other cameras compatible but it will take time.

@cocolee8396

Жыл бұрын

I have home base 2 and cam 2 pro can I add home base 3 and the cam 3 to it?

@Wanderer001_Reviews_Clips

Жыл бұрын

@@cocolee8396 You can only use one of the two home bases. Eufy is currtly retoractivly making it so thier older cameras are compatable with the home base 3.

@cocolee8396

Жыл бұрын

@@Wanderer001_Reviews_Clips oic pls update us and make a video how to set up thank you very much

@Wanderer001_Reviews_Clips

Жыл бұрын

@@cocolee8396 How to set up which part?

So you just buy a hard drive and install it. That's it? Nothing to download?

@Wanderer001_Reviews_Clips

Жыл бұрын

Nothing extra to download as you already would have the eufy app. The drive would then just need to be formatted then it is good to go.

What supposed you buy something solar but you needs plug the base to the electricity that's the more wrong deal I gonto return my camera because no works with my 5g wifi

@Wanderer001_Reviews_Clips

21 күн бұрын

The cameas are solar powered the base station needs to be powered some how. If it stays inside it really can't be solar powered. 5g wifi is what your cell phone uses, unless you mean 5ghz. In which case there are not a lot of cameras out there right now that use that spectrum.