This is extremely useful thanks.

@TechInsomnia

9 ай бұрын

Glad it helped my friend 💯 Thank you 🙏

Yup brilliant, got myself 6200ddr5, showing as 5200. All good now 🎉

@TechInsomnia

Жыл бұрын

Perfect! 🙏

Nice thanks bro

@TechInsomnia

Жыл бұрын

Pleasure 🙏

Thx so much 😊😊

Thank you so much

@TechInsomnia

10 ай бұрын

Pleasure 🙏

Thank you. I just got a 7950x with a X670E Hero and 64GB of 6,000Mhz of RAM.

@TechInsomnia

2 ай бұрын

CRUSHING! 💯💪🔥

You don't have to go to the advanced mode, the XMP profile set to "enabled" will clock to it's rated speed, from the easy side.... Also, overclocking it to the full speed of the RAM will increase the voltage in all cases. Usually to 1.35v

@TechInsomnia

5 ай бұрын

Thank you for this comment. 🙏 I'm going to make an improved version of this video in the future with the next Asus Gaming build that comes through my workshop and include your tip as the first course of action. 💯

@BerkayMuvaffak

4 ай бұрын

Xmp is disable my ram will be run custom frequancy?

Thank you sir

@TechInsomnia

2 ай бұрын

Pleasure 🙏

only way it worked for me. xmp kept crashing so tysm

Thanks, my bios was forcing my 4800 ram sticks to run at 5300... This was forcing my pc to freeze every now and again and ramp my fan speeds up.

@TechInsomnia

5 ай бұрын

Really glad this video helped my friend. 🙏 I'm going to make a better one in the future forsure 💯

but what if its not posting then its telling me to press f1 to revert the settings bcs its not going to post? should I lower the frequency?

@TechInsomnia

Жыл бұрын

You can try a lower frequency. Is the voltage set to exactly what your RAM is rated for?

Ty

@TechInsomnia

8 ай бұрын

Pleasure 🙏

For some reason i did everything and when i clicked save and reset it's still resetting and the pc seems to be normal but there is no signal and my mouse and keyboard ain't working..

@TechInsomnia

9 ай бұрын

Certain brands can be very finicky on Asus boards. You might have to pull your BIOS battery a few times before you find a stable setting combo that works well with your exact hardware. 🙏

I have i9-14900 and 32 ram DDR5 i switch it to 5600MHz that is its capability from 4000 that starts me but it doesn't work

I got 3200mhz but it is higher than 1.35v (which i also have on the ram packaging). Should I lower it down?

@TechInsomnia

8 ай бұрын

I would recommend it my friend 🙏

@yoshed3517

6 ай бұрын

how do i lower the voltage?

I’ve tried this and I’m still getting that same slow speed. Does anyone know how to fix this?

My ram should be at 3600 but when its higher than 2400 , the pc reboots and shuts down a few times until it throws me into safe mode...do you have any idea on how to fix it?

@TechInsomnia

8 ай бұрын

I would check the voltage first and make sure it matches what’s written on your RAM. Does your motherboard give you the option to match the voltage in a setting usually close to or in the same section where you set the speed? Sometimes that can throw off a RAM setting being successfully applied. What brand board are you using my friend? Hope this helps 🙏

@vaynemarksyou6213

8 ай бұрын

@@TechInsomnia Fixed the problem... I had my two sticks of ram on slots 1 and 3 and when I moved them to slots 2 and 4 it worked.

@TechInsomnia

8 ай бұрын

Incredible! 💪 Really glad to hear you got it working my friend 💯

@aboiwithmemes3988

6 ай бұрын

​@@vaynemarksyou6213I have the exact same issue except mine is in 2 and 4 already, you think if I make 1 and 3 it will work

@vaynemarksyou6213

6 ай бұрын

@@aboiwithmemes3988 It depends on motherboard but 99% of the time slots 2 and 4 are best for dual channel. Make sure they are on 2 and 4 and you didn't make a mistake

Hy! If i have 4 pcs ram, need to do same? Because i watched other video and i used to D.O.C.P setting, worked, but now i bought more 16gb ram and the result was black screen. Now iam using the 4x8gb on 4800mhz, but i want 5200. Thank you for the answer!

@TechInsomnia

5 ай бұрын

What exact board do you have my friend? Make and model. 🙏

@themakeryt

5 ай бұрын

@@TechInsomnia ASUS Prime B650-Plus

I don't have that option but I have everything else except the over clock thing

@TechInsomnia

Жыл бұрын

What speed does your RAM say on the package my friend?

@captaincarrot1181

Жыл бұрын

@@TechInsomnia if by package u mean what it came in I have no idea

My PC won't boot into BIOS after making these changes. What am I doing wrong? Do I need to enable the XMP? I didn't see you using XMP.

@TechInsomnia

5 ай бұрын

If ever you make changes and boot to a black screen you can unplug your PC and pull out your BIOS battery for a few minutes. Then reinsert and boot up. This will reset your motherboards BIOS values to default and you can try a different configuration. XMP works well most times you can try that. In this video I wanted to kind of give the viewer an understanding of what the settings mean and how to do it manually but I should maybe make another video and show XMP as well. Hope this helps my friend 🙏

thanks, mine is 3600mhz, but it is unstable, and there are only 3600mhz and 3000mhz, how to create a 3200mhz option?

@TechInsomnia

5 ай бұрын

Have you tried enabling your XMP profile? When you do, what speed does it show?

@FallenLight0

5 ай бұрын

yes in order to show 3600 and 3000 I need to enable XMP profile. When I do it only appears 3600 and 3000. So I need to create the 3200 option?@@TechInsomnia

I changed that and saved and then restarted my pc it turned on but its all black screen and nothing is responding

@TechInsomnia

10 ай бұрын

Sometime the board or RAM or CPU won't like that exact setting. Different parts can react in different ways to different configurations, especially when a setting just doesn't sit well. Unplug your power cord and open your computer. Remove your BIOS battery from the board and wait 30-60 seconds. Re-insert BIOS battery and your computer should boot fine with default BIOS settings. Try another configuration and see if the computer restarts and runs stable. 💯 Hope this helps my friend 🙏

What If AI Tweaker does not appear? ASSUS G531

@TechInsomnia

5 ай бұрын

Try enabling XMP profile. That should do the trick. 🤞

i don’t have this option on my gaming laptop. i got a 16 stick 3200hz with the 8gb already on laptop but my ram says 2400

@TechInsomnia

8 ай бұрын

This will mainly work on an Asus Motherboard as shown in the video but the concept is similar with different brands. Will likely just be different menus or steps to get to those settings. 🙏

@mikey...7077

8 ай бұрын

if you installed a stick of 16gb with an 8gb stick and the 8gb sticks speed is 2400, it will bottleneck your 16gb

At myn says 1.35 V but it’s running at 1.36v is that ok?

@TechInsomnia

5 ай бұрын

That's ok. I've seen systems set in a similar fashion and they worked well. Ideally you want to get as close as possible so this will be fine. 💯

What if the voltage is not the same? I got DDR5 6000 and it says 1.35V but in the hardware monitor it says 1.264V

@TechInsomnia

Жыл бұрын

Try your best to get the voltage to the same value as presented on the packaging my friend. You may need to search up your exact board and settings online for the RAM you have. 🙏 Hope this helps

I tried changing it to 6000 and it still says 4000. I did this in my msi motherboard and it was at 6000

Idk why in BIOS shows that my ram is at 3200 but in taskbar manager is at 1600

@TechInsomnia

11 ай бұрын

What board and RAM do you have my friend?

@UnknownAZM

11 ай бұрын

@@TechInsomnia ASUS PRIME B450-PLUS and 2x HyperX Predator RGB 8GB DDR4 3200MHz CL16

When i did this today it just gave me "hdmi no signal" had to reset it. Anyone know why?

@TechInsomnia

5 ай бұрын

Sometimes if the setting is incompatible with the RAM itself, this might happen. It can be a pain but the best way is to unplug the computer and pull the BIOS battery for 30-60 seconds and then re-insert. This will set the BIOS back to default settings and you can enter the BIOS and try again. Hope this helps my friend. 🙏

@Nameless_TF

5 ай бұрын

@TechInsomnia I just did it after seeing your comment to someone else, and it worked 😁 It's now running at 3533mhz. Thanks alot

@TechInsomnia

5 ай бұрын

Perfect! 😁@@Nameless_TF

My pc turned on and off by itself did I break it? Cause I don’t have the ram box with me so I don’t remember the ram speed

@shaybn

6 ай бұрын

It was 3200 mega hertz and I changed it to 5500

@TechInsomnia

5 ай бұрын

Asus motherboard? Try unplugging the power and opening it up and remove the bios battery if you can access it. Then wait 5 min and put the bios battery back in and plug the computer and power on and enter bios. You should be back and reset to factory bios settings. Try not to set higher than what your RAM is. It will display the speed and voltage on the RAM itself most times so while you’re pulling the BIOS battery and have it open maybe take out one of the sticks of RAM and check it. Take a clear picture for future reference. Hope this helps my friend. 🙏

@shaybn

5 ай бұрын

@@TechInsomnia I don’t remember the name off the motherboard but I had the same bios as you. I’m gonna work on that today hope the problem gets fixed

@shaybn

5 ай бұрын

@@TechInsomnia it still doesn’t work I’m getting nervous

@TechInsomnia

5 ай бұрын

@@shaybn Have you tried enabling your XMP profile? This should do the trick to get you the best settings for your RAM and I hope it does my friend. 🙏

I have 3200mhz too . Is it safe to go more ?

@TechInsomnia

2 ай бұрын

I like 3200 because it’s the safer more stable speed on average for most Asus boards at least in my experience. Better timing might help you more depending on what you’re doing and Corsair and G.Skill have quality builds for the most parts. 🙏

Mine keeps failing to boot although it’s at the correct speed

@TechInsomnia

5 ай бұрын

Have you tried enabling your XMP profile? When you do, what speed does it show and what's the voltage? Does it match what's written on your RAM? You can look it up online if it doesn't display on the sticker of the RAM itself.

Do we need to turn on Xmp

@TechInsomnia

5 ай бұрын

On most Asus boards XMP will set all the settings for you. You just need to double check that the settings it chooses are accurate and that they match up with your specific RAM. Hope this helps my friend. 🙏

Bruh mine was pre built and the Builder don't give the box of RAM bruh

@TechInsomnia

5 ай бұрын

You can look up the specs online if your RAM doesn't have the specs displayed on it's sticker. Hope this helps my friend. 🙏

i dont have xmp i have docp what do i do?

@mariusjohannessen9626

3 ай бұрын

XMP = Extreme Memory Profiles (Intel cpu) DOCP = Direct Overclocking Profile (AMD cpu) They do the same

Youre not getting the timing 16-18-18-38 of the RAM by doing it that way.

NOpe Asus laptops don't have the ontion to change XMP profiles FML

@TechInsomnia

Жыл бұрын

Shoot.. Which Asus laptop do you have?

not working for some reason… my ram should be 3200 speed but its not working when i set it to that

@RedPhilip0912

Жыл бұрын

Same. Set it to 3600mhz but it stays at 2600mhz. My mobo supports up to 4600 mhz. My ram is rated for 3600mhz. No idea why this happened.

@TechInsomnia

Жыл бұрын

Is your BIOS up to date with the most current version my friend?

@TechInsomnia

5 ай бұрын

@@RedPhilip0912 Have you tried enabling your XMP profile? This should do the trick to get you the best settings for your RAM and I hope it does my friend. 🙏

My pc don't have AI tweaks

@TechInsomnia

11 ай бұрын

Asus Motherboard?

@fairkwys

11 ай бұрын

@@TechInsomnia yes

@fairkwys

11 ай бұрын

@@TechInsomnia ASUSTeK COMPUTER INC. D425MC (AM4)

@TechInsomnia

11 ай бұрын

They have removed that feature in your unit because this is a consumer grade pre-built machine and they wouldn't want you to change the RAM clock settings. They like to set everything for you in the factory so it's less likely to fail and likely the RAM they put in these machines can't handle a higher clock speed so they won't give you the option unfortunately my friend. 🙏

My PC POSTed to safe mode.

@TechInsomnia

2 ай бұрын

Unplug your power cord and pull your BIOS battery for a few minutes and it will reset you to OEM stock BIOS settings. Hope this helps my friend 🙏

@NinesNX

2 ай бұрын

@@TechInsomnia I solved it. I needed to switch RAM to slot 2 and 4

@TechInsomnia

2 ай бұрын

@@NinesNX Excellent! 💪

my monitor turns black

@TechInsomnia

11 ай бұрын

It happens when the board doesn't like a certain configuration for that exact type or speed of RAM. Try updating the BIOS to the newest version. That usually helps. 🙏

@guigo6

11 ай бұрын

@@TechInsomnia I already know why

@mirofw

10 ай бұрын

@@guigo6why

@mirofw

10 ай бұрын

@@TechInsomniahow do i get back into bios

@TechInsomnia

5 ай бұрын

Usually F2 or DEL key on boot @@mirofw

Bi - yoss?

@TechInsomnia

5 ай бұрын

yup

@Kreemerz

5 ай бұрын

​It's bi' yoehs​s @@TechInsomnia

This screwed my pc

@TechInsomnia

Жыл бұрын

Try pulling you BIOS battery and give it a minute before you pop it back in. That should reset you settings to default 🤞