Madison playing the role of a mad scientist is quite fitting

@cheezywheezy526

3 жыл бұрын

@@err don’t comment

@suppar8066

3 жыл бұрын

Yeah she knows how to create big oof moments

@chuckgaulke6219

3 жыл бұрын

Seeing Madison in LTT videos make me happy

@belknapbrothers3971

3 жыл бұрын

Madison is the best LTT employee yet

@esentis_x

3 жыл бұрын

@@belknapbrothers3971 Antony

Here is our sponsor: "Microcenter.... we are no where near where ever you live. If you live there... we don't."

@cody2957

3 жыл бұрын

Haha lol im right next to one with all ryzen 5000s in stock lol

@JimbotheGymbro

3 жыл бұрын

Arizona gang

@isaarunarom7830

3 жыл бұрын

Boston has one....but iv never been becuase 15 minutes is to far . . .

@spencerrr9878

3 жыл бұрын

Just moved to a city that is 20 minutes away from the only one in my state 😎

@youtubeminute4388

3 жыл бұрын

Florida here, never heard of micro center until I saw LTt

I've been using 32gb (4x8gb) of ram with my b450 and Ryzen 5 5600 for over a couple months with 100% reliability, 2 sticks are 3200 and the other 2 are 2666. I don't care a terrible about about speed, so I set them all to run slower at 2666 and have had absolutely no issues

@dfcteamracing

Жыл бұрын

this is excatly what ive been researching! lol thanks!

@Nemesis-ky5ih

Жыл бұрын

What od i place cl16 ram to cl14 Rama triple chanells,that Work or not,sorry for my bad English...

@Nemesis-ky5ih

Жыл бұрын

All Rams is 3200mhz

@thecuzzy3571

Жыл бұрын

i have a qs can i overclock my 3000 mghz ram to 3200 and pair it with a 3200

@MaddinPlayz

Жыл бұрын

@@thecuzzy3571 I don't think so...

40 years old and just now getting into tech. Thank you so much for this. I paid a local kid to build be a gaming computer. my ram is very minimal and buffrs sometimes during youtube.

@arslanrasit

28 күн бұрын

Ram and youtube buffering is not related dude.

How about a tech tip for you guys: If you make charts that compare things, put them both on the screen at the same time, so you can actually compare them.

@shoebockx3334

3 жыл бұрын

Jeez you fuckin killed him

@julianbueno699

3 жыл бұрын

true. There is space in the graphs to combine both figures into one, like putting the results of one test for CS:GO next to the results for the ther test, side by side.

@490o

3 жыл бұрын

They've been doing it for so long, I don't think they know how to do it properly.

@marvingudel605

3 жыл бұрын

It's freaking me out how they compare ram configurations solely by making videogame fps benchmarks. I mean thats absolutely a key point for gamers, but probably isn't an overall good measurement.

@guscichoski

3 жыл бұрын

He's dead, Jim.

MTT? I'm down.

@theguywhodoesassettoedits4513

3 жыл бұрын

Oh good to see you here. Love your vids clockner :)

@ether2434

3 жыл бұрын

GODner

@hukama6911

3 жыл бұрын

simp

@InfoBrokerz

3 жыл бұрын

simp

@clockner

3 жыл бұрын

@@hukama6911 ​@Info Brokerz I'm afraid you guys got that first letter wrong. Just saying...

Adding this for other enthusiasts that may run into this oddness.. I build systems typically with older hardware to save on costs. Recently built an Unraid system for my home that I have been very happy with, but recently ran into sporadic parity issues. Assisted by that great community, we tracked in back to the RAM, but not for the usual reasons. I am using an ASUS X99-a USB 3.1 with an Intel Core i7-5930K CPU @ 3.50GHz. This is a quad channel motherboard with 8 DIMM slots. As per the ASUS manual, I installed 4 Kingston HyperX Fury 8 Gb modules all in one quad channel. My mistake; I bought two dual channel kits, not one quad channel kit. Turns out, everything worked... most of the time. But running Memtest pointed to issues and errors with the setup. When I reinstalled the same RAM as dual channel in the top DIMM slots of quad channel bank, everything ran smooth. Weird, eh?

I mixed 2 sets of 2x4 ddr3, different speeds. Only thing that caused issues was having XMP enabled, but I was able to OC the lower speed ram manually and have been running it like that for at least 3 years

"As long as your workload doesn't exceed the capacity of the smallest module" Ah, maybe that extra 2 GB stick in my computer isn't a good idea...

@sweaterfish6311

3 жыл бұрын

It has to not exceed *twice* the capacity of the smallest module, acually, and even when it does that extra is just going to run as single channel, which is presumably the alternative anyway.

@Red_Eye_Jedi

3 жыл бұрын

The question i want answered is what the implications are for anyone with soldered ram in their laptop.... If i have 4gb on board and need more than 8gb in total what does that mean for dual channel operation and if you want to get faster ram how do you know what the modules on board will handle??

@bend7668

3 жыл бұрын

It only creates a performance impact, not compatibility errors

@HonkForLife098

3 жыл бұрын

I have two 1gb module just to fill the slots, guess I should remove them then

@Ghozer

3 жыл бұрын

@@HonkForLife098 But if you have 2x8GB and 2x1GB in their respective Dual Channel configs, (just as an example) that shouldn't impact performance in the same way...

I'm waiting for another Mean Comments video where it's just Madison reading all of them to Linus, then she shows the cards and they're all blank.

@Felipemelazzi

3 жыл бұрын

No, she shows the cards and it's all "qupons"! Muahahahah

@b-beluga4510

3 жыл бұрын

Linus 🐧

@zaidlacksalastname4905

3 жыл бұрын

PERFECTION

@finitekosmos

3 жыл бұрын

Nah the cards contain a collection of Linus' segue's....... That truly is a fate worse than death.

@Luca-zq3pi

3 жыл бұрын

We need to make this happen

I really appreciate that you include pricing with all of your plugs!. Glad LTT is transparent and isn’t just trying to lure me into their Store trying to figure out the price!

Thanks for another very informative computer related video. I was always told mixing RAM modules would cause problems, but I have an ASUS E35M1-M Pro motherboard from 2011, which has two sticks of DDR3 4 GB RAM; one Corsair XMS-3 and one 'no-name' stick of DDR3 4 GB RAM. They've worked happily alongside each other in my Spare PC since 2015, when I built my gaming PC. So much for all the warnings of 'dire consequences' from various 'experts'. Keep'em coming. Russ. UK

I love how madison is acting like she is installing the ram in the intro and then we zoom into some else's fingers pushing it into the slot.

@technoclasher1

3 жыл бұрын

actually it can be seen clearly because she is wearing a white gloves and the next footage is of fingers with no gloves

@SuperFischboy

3 жыл бұрын

so is she now an intern at LMG ? :D

@cfr.r

3 жыл бұрын

@@SuperFischboy yeah she was hired. everyone is very happy about it

@unanimated7084

3 жыл бұрын

@@SuperFischboy yeah, I'm pretty sure she manages the LTT tik tok

@GOGOROBOv2

3 жыл бұрын

But why could you tell tho?

Shout out to the notebooks with unremovable 4GB RAM and one extra slot when they support up to 32GB of RAM 🚮

@dmgd6286

3 жыл бұрын

absolute worst!

@fahrimertdincer8421

3 жыл бұрын

When bios sports to 8 gb ram and you have 4 on laptop and there is only 2 slots and 1 is fled by 4gb you will think like me 2 4 gb or 1 8gb ram whic one is beter?

@gdhplays3166

3 жыл бұрын

@@fahrimertdincer8421 two 4gb sticks are better if your motherboard supports dual channel mode (which it likely will). It performs better in gaming and overall workload consumption.

@shrey768

3 жыл бұрын

@@gdhplays3166 So if I have 4gb on board already, I should go for another 4gb (4+4=8) instead of 8gb (4+8=12)?

@MrGman910

3 жыл бұрын

@@shrey768 yes

I've mixed before and as long as the speed and timings match I've honestly always been able to run dual channel.. Both on AMD and Intel systems. I know this was a problem 10+ years ago but nowadays it's not that bad at all.

20 years ago it was the same problem with Cas timing. Size of MB or GB was not important... the chip on the module were! As long as u had the minimum recommendation, it worked and upgrade were easier. Hundreds of my customers were happy and they all thought I had magic special upgrades for their computers🤣Samsung and Micron were King👑 back then. Great test Linus ✊ Running Pentium 3 and Tx motherboards Cas and Latency were and still are important 😎

@iamspencerx

6 ай бұрын

Most people don't care about frequency and latency they want more ram so the system stops swapping to the HDD and for that any module will do. I doesn't take a genius to add more ram

One day he's gonna say "We don't need a segue, thanks to our sponsor, Segway!"

@MrCODEmaster00

3 жыл бұрын

Legit though lol

@m0epinator

3 жыл бұрын

Unfortunately segway is Insolvent.

@MischieviousJirachi

3 жыл бұрын

@@m0epinator That sucks :/

@MvsG18

3 жыл бұрын

Underrated joke

@tylerbrown1160

3 жыл бұрын

Who’s gonna tell them?

"You've got to be very careful about how you populate your slots." Good general life advice, honestly.

@sayingnigromakesyoutubecry2647

2 жыл бұрын

My brother wasn't careful and he is now paying the price xd

@derp3044

2 жыл бұрын

linus life tips

@sweaty6158

2 жыл бұрын

sounds like something you would say in china

@moneyong5451

2 жыл бұрын

Lol

@majinplaton

Жыл бұрын

ALLES DEUTSCHE, MUHAHAHAHAHA

Upgraded my GF's HP all-in-one PC awhile back with a memory module (and an SSD too) that I had laying around in the 'ol spares box, worked great. And just bought myself a lenovo T580 laptop and upped it from 8 GB to 24 GB using the OE 8 GB stick and a new16 GB stick and it's cruising along just perfectly. So it can be done.

Great video! I work at Best Buy and this video gave me. better understanding of RAM compatibility that I can communicate to customers. Thank you!

I just can't believe Madison is actually Linus' employee.

@jhonnythejeccer6022

3 жыл бұрын

I never saw her again after that one ep until now lol.

@mariosiroky5454

3 жыл бұрын

@@jhonnythejeccer6022 She is graphic designer of ltt

@KikkawaRyu

3 жыл бұрын

@@mariosiroky5454 Graphic designer/social media manager

@Vordhosbn

3 жыл бұрын

Shame, she's insufferable.

@tugrulserhat

3 жыл бұрын

@@mariosiroky5454 lol didn't know that :D

Madison is probably one of the only LTT employees being featured in videos this soon after employment. She was even on a video before employment

@birkk

3 жыл бұрын

Typically they do a probationary period before they can be public iirc

@xxJOKeR75xx

3 жыл бұрын

she basically has the job because of that video and her being crazy.

@errorcode503

3 жыл бұрын

@@birkk yeah, I think it is a year or two. It is because she was so great on ROG rig reboot obviously

@errorcode503

3 жыл бұрын

@@xxJOKeR75xx She has applied for jobs there even before she did that video. She was employed because she was the best person for the job. Her being on that video may have helped slightly but that is unknown.

@xxJOKeR75xx

3 жыл бұрын

@@errorcode503 it definitely put her on the map. Linus didn’t want to employ her just because but if something that fits would come up...

thank god there is linus to answer all of our random computer questions

I've mixed ram since it was EDO ram, I did on one build get occasional BSOD's, until the bios update. But I try not to do it it these days, so I am glad to see that line of thought is still supported.

LTT is like an addiction for u to keep opening ur pc and make a heart surgery on it

@maneaandrei7881

3 жыл бұрын

Swapping ram compared to heart surgery. Aham, lego for adults

@thecoolguy9364

3 жыл бұрын

@@xX_MC_OvU_PvP_YT_Xx lmao

@tzxtiger

3 жыл бұрын

Lol

@freevbucks8019

3 жыл бұрын

Or in my case, a head transplant

@Besieboo23

2 жыл бұрын

growtopia man

Linus videos: Linus: it doesn't matter Linus: or does it? Also Linus: 10 minutes of content explaining why it does not matter but still does.

@toastcart8211

3 жыл бұрын

5

@olo398

3 жыл бұрын

classic LTT vid format really.

@rikumajumder1558

3 жыл бұрын

I mean it's common sense to use the same type of company hardware. However it is nice to know that if you know how to tweak sh*t then maybe you can get away with it while it all working properly.

@t1995roger10

3 жыл бұрын

Does it work? *YESN'T*

@SelecaoOfMidas

3 жыл бұрын

Well, I'd rather know why than just get a hollow talking point without some substance behind it to chew on.

Didnt really get what i was hoping for with this one... my main concern is with running different sets of dual-channeled ram. (so 4gx2 + 8gx2 at different Mhz). Most ram comes in sets of two nowdays

@fahmialikhsan8477

9 ай бұрын

What happen to those set now? Same here, i have 4GB+ 8GB and still run smooth for my daily use.

@nikhiljain5101

7 ай бұрын

@fahmialikhsan8477 I'm planning on doing the same,Do you think it will effect my decent gaming? or it should be just fine 4+8GB both of different frequencies

This is a really interesting video. Nice work guys. I always wondered why ram modules couldn't be mixed if they're very similar and have similar time configurations especially since all those specs can be tweaked. You also spoke about an AMD design that can handle multi or mixed RAM speeds by design. I'd like to find out if the ASUS' Zephyrus. The mid tier gaming laptops with quite a lot of bank4buck squozen into them. You guys did a expo on the new models recently. I have a 2021 model and it came with 8gb DDR4-3200x1 paired with 8gb 3200 soldered to the board. There's only one so-dimm.... so, dems the best hardware configurations possible. The specs say it can see up to 24gb but I can only do it if I buy a 16gb stick. Many people say that I'm going to lose dual channel the very second I do this. However, just as many other say that it will perform in dual channel up until it surpasses the dual channel's max capacity. Honestly, I was beginning to side with the naysayers, that it likely will disable dual channel upon install. After hearing what you were saying about AMD I started wondering if maybe they implemented something like that in the Zep. I'm not even sure where I could find such info.

@YOUNGMON3Y847

Жыл бұрын

Does it work?

@jonathanjaramillo4865

3 ай бұрын

hey, were you able to get it done?

I love how you take an extra moment to briefly explain binning, but then just expect the viewer to know all about CAS latencies and such.

@ScReamOut93

3 жыл бұрын

Well, to be fair binning is not really super specific. SO chances are you can relate to that without extended context/information. So it's easy to mention for 5 seconds and go on.

@marcusborderlands6177

3 жыл бұрын

@@ihatepokemonthings you are the one hitting the nostalgia juice a bit too hard pops. Things are 100% better these days, and crts are dead for a reason.

@Endonae

3 жыл бұрын

@@ScReamOut93 Yeah, I get that it's much simpler to explain. It's just pointless and poor form. Imagine if a calculus textbook took a moment to explain what a slope is but then completely gloss over derivatives. Lately it just doesn't seem like LTT has a good grasp of the knowledge their audience has and the level of detail they go into is all over the place.

@marjanmartinov9607

3 жыл бұрын

@@Endonae but if you're watching a video about RAM it's not unreasonable to know what latency is, because you should research before buying. correct me if I'm wrong

@cwill2127

3 жыл бұрын

@@ihatepokemonthings sure grandpa, please go on with the war stories. But really we get it you’re a hipster and different

Madison is everywhere now. Has to be the fastest a new employee got onto LTT vids. True power behind the throne at LMG XD

@the_retag

3 жыл бұрын

Thats still yvonne... but madison may be an apprentice or similar

@01Beaker

3 жыл бұрын

I mean, she is so fast that she was on ltt before she was even hired!

@nickevans8977

3 жыл бұрын

@@the_retag No, it was Madison at the start of the video and is a full time employee

@dvargas3553

3 жыл бұрын

EXACTLY. Linus said it, normally it takes a couple years to even be able to get in front of the camera at LTT! Maybe they let her get on early bc of her history on the LTT channel; that and she is kinda made for the camera, she’s super funny lmao 😂

@the_retag

3 жыл бұрын

@@nickevans8977 i was talking about power behind the throne. I may be short sighted, but im not that blind that i cant keep yvonne and madison apart

"Everyone knows mixing different RAM is bad" and here is me who didn't know

@gamervisveish

2 жыл бұрын

Same

@gimmeabreak4435

2 жыл бұрын

You guys are weird

@cyruscanonigo9706

2 жыл бұрын

✋✋🖐

i had a different set of 2 sticks for years and it ran fine, it wasn't until this year i learned that the fastest sticks will be limited by the older ones. but as far as compatability and usage goes it went fine, that being 4 sticks, 2 sets of 2x. Those were some old ass ram sticks i bought with the pc like 10 years prior at 4gb x2 with 8gb x2. Not sure I matched the proper slots 1-3, 2-4 either as I didn't know that until later.

I've been mixing RAM since the second year of owning a PC. I've never gone for anything too crazy different between them, but different manufacturers, different brands and so forth. Honestly never noticed any issues. It was much later down that people cautioned against mixing ram, but I never really paid it much heed since I'd never had any problems. The minor performance issues probably matter more to someone trying to squeeze every last drop of performance out of their system, but I guess I'm just easy to please.

@kynokaz

3 жыл бұрын

I'm buying a prebuilt and it only comes with 1 stick of 8gb ram should I get another 8 gb stick? Or will it not work

@warpspace7871

3 жыл бұрын

few of my RAM sticks died... it could be related to mixing... DDR3. I just test different configurations and see if they boot. I haven't even checked timings

@Wanis23

3 жыл бұрын

@Biorider does that work for laptops too? If i were to upgrade because the stock ram on my laptop is a samsung and most local pc stores in our city does not sell samsung ram. Is it okay if i buy a different brand as long as it has the same speed?

@mihan2d

3 жыл бұрын

So wait, you're saying I've been wasting time trying to find a matching kit of 2x4 HyperX 2666 CL15 to add to my two sticks, and I should buy a vastly more popular 2666 CL16 version and it will 100% run in dual channel with my CL15 sticks, even with a mild overclock? That's a serious question by the way, I really am anxious about buying a mismatching kit. I heard a few years back, I think even from some tech KZreadr, that unless the speed and *every single timing* is matching on the second kit of ram, the dual channel won't work. And this video sounds kinda inconclusive, like what if I don't want to match a 2666 and 4000 kits like in the example. P. S. You know a person is desperate when they seek tech advice from strangers on KZread.

@apex639

3 жыл бұрын

@@warpspace7871 Same thing happened to my friend after a couple weeks of having mixed rams

“Just how smoothly Linus here...” *Skips 20secs*

@gamingtopps8975

3 жыл бұрын

@DIDIER MATEO RAMIREZ - ARCE well no shit

@GamingBlizzardA

3 жыл бұрын

@@gamingtopps8975 😂😂

@DaneH64

3 жыл бұрын

@DIDIER MATEO RAMIREZ - ARCE Gee, Nice observation Einstein...

@daniel8763

3 жыл бұрын

@@DaneH64 hahah

@axis6333

3 жыл бұрын

That is a good wisdom

In general as long as the frequency is the same you're fine with plug and play. Been a rule since my first laptop, a Dell Inspiron 8600. Wouldn't boot with 2 different frequencies. Swapped the smaller one out with one to match the bigger one. Ran beautifully

@nikhiljain5101

7 ай бұрын

@vincentmarcellino7183 i have a Dell Inspiron with 4gb Ddr4 -2666v Ram stick I'm planning on getting a 8gb Ddr4 -3000v should it be fine ? or i should instead get a 8gb -2666v to match it?

I have mixed memory but only 2 of each type to fill all four slots and there have been no issues for 4 and a half years of gaming and watching your channel among others !

Oh no, I hope Madison didn't mix the blender and gaming RAM.

@cyanporpoise

3 жыл бұрын

Big oof

@aclonymous

3 жыл бұрын

why does this random comment have 4 separate korean spambots

@ianroach8119

3 жыл бұрын

@@aclonymous idk man

@aclonymous

3 жыл бұрын

@TheReal_Yash they were all deleted

@xxcattoxx544

3 жыл бұрын

@TheReal_YΛSH when the:

One time, I mixed memory by taking DDR3 and putting it in a DDR4 motherboard with a hammer. A few additional DDR4 sticks and it didn’t turn on at all. (In seriousness though in my experience mixing ram, it usually is limited by the weakest link. The slowest RAM will slow down other sticks that can run faster) I would love to see a video where you guys mix DDR3 & DDR4 on some of those systems that support both. Ps: ily Linus.

@xb7778

3 жыл бұрын

HEY IM SUBBED TO U

@spacetoast4874

3 жыл бұрын

Ily jay

@sardarkhalsa

3 жыл бұрын

@@xb7778 ME TOO

@toastcart8211

3 жыл бұрын

E

@oldmanonyoutube

3 жыл бұрын

Kitguru did an article on the Asrock B150M Combo-G. It supports DDR3 and DDR4, although not simultaneously. No need for a hammer.

Back in the day I did a similar thing with DDR2. I found the same was true. I didn't do all the bench marks that they did for comparison. I basically just kept mixing ram to see if it would even work.

I ran 2x8 Kingston and 2x8 Crucial modules just fine, with the former ones being Hynix CJR and the latter Micron E-die. So they were different chips. But with the same rated speed and timings (3200 16-18-18-36)

LTT: Posts one video featuring Maddison in the intro Viewers: "MTT?"

@WetaMantis

3 жыл бұрын

He's teasing us with 5secs of appearance XD

@TheMsdos25

3 жыл бұрын

Was she from the ROG Rig Reboot

@fredsigu6684

3 жыл бұрын

@@TheMsdos25 she was, yes

@julianrime8544

3 жыл бұрын

@@thealien_ali3382 chill bruh

@reggiexp69

3 жыл бұрын

she was also in a other video with the old server where she made sub to linus on wooden blocks

“Dude, what are you doing? We need to finish building the computer” *rubs the sticks of ram together* “...it’s for good luck”

@cutiebunnyamber3447

2 жыл бұрын

jake.

@VaishnavVenugopal

2 жыл бұрын

jake.

@blight1934

2 жыл бұрын

lol. wouldn't it kill the ram? (static) meanwhile... “It’s not dying, who designed this stupid RAM?”

@abdrex2139

2 жыл бұрын

Jake.

@rifdifirebolt

2 жыл бұрын

Like chopsticks

I always thought Linus was just a lucky rich dude. Now I realize how cost efficient he is and doesn't waste. Weird how I forgot he was human just because he's an online content creator. Thanks for teaching me how to actually make my very first PC run. I've watched your videos enough to build my very first PC without any help lol. Thanks :)

@kx7500

2 жыл бұрын

Being cost efficient doesn’t mean you’re not rich.

@brendancross2767

2 жыл бұрын

He did say in the review of the steam deck teardown that he’ll be modding his because he’s lucky to be able to afford to break it

@hare_ware

2 жыл бұрын

@@kx7500 Probably helps that Linus didn't start out rich, he and his team worked for what they have.

@Enalius

2 жыл бұрын

What? He was testing it for the sake of a video, not to be cost efficient

@kx7500

2 жыл бұрын

@@hare_ware yeah, still very lucky tho

I'm running 4 sticks of mixed ddr3 in my system now; I've had no issues. Old config was 4 4 gig sticks of 1333, 2 sk hynix sticks, one micron stick, and a Kingston stick. All of them ran at 1333 cl12 just fine. Current config is 2 sticks of pny XLR8 ram, and 2 sticks of hynix. They mix and run just fine.

Linus: “increasing your RAM speed is important for performance” Me, using mismatched 400Mhz DDR2: “interesting”

@leakingamps2050

3 жыл бұрын

What are you running? A TI-86?

@Frog-ko6uu

3 жыл бұрын

@@leakingamps2050 Windows 10 Pro 64-bit on an AMD Phenom II X4 920, 4 2GB sticks

@Frog-ko6uu

3 жыл бұрын

@@leakingamps2050 The computer was a custom built in 2009, it’s seen Windows 7 come and go, and runs 24/7 as a server for the past 18 months or so.

@Fishgod1216

3 жыл бұрын

I used to have a PC with athlon 64 3400+; it supported (barely) the instruction codecs windows 8.1 uses, so I installed it. Ran surprisiungly OK considering its age.

@hardrivethrutown

3 жыл бұрын

Ouch, even my first system was 800mhz

I feel like Madison is the only one that can truly revive channel super fun

@suppar8066

3 жыл бұрын

Channel big oof :'D

@keksentdecker

3 жыл бұрын

what about Dennis "live laugh" Liao?

@mizhimo

3 жыл бұрын

The only one able to do that task is Nicky V

@Unknown-sz8kg

3 жыл бұрын

Simp

@gamingwithlucas7201

3 жыл бұрын

@@err nice fake verification bot

I remember many moons ago I had done this (back when I had ZERO clue about Speeds/Timings etc) I was surprised to find that I could successfully run 2x Kingston Hyper X 8GB and 2x Ripjaw 8GB DDR3's (unfortunately I no longer have these sticks and still to this day have no clue what the clock speeds or the timings were), never once had a bluescreen (that I am aware of) in regards to the RAM and never had to tweak anything in the bios it was just simply plug and play. I am pleased to announce that I am no longer working with a $0 budget and using every hammy down possible to upgrade my system I now have fully populated 4x 8gb Corsair Vengeance and it looks a lot nicer than having 2x Mid Sized Black Ram Sticks and 2x Jumbo Red Ram Sticks :P

@serebbi

Жыл бұрын

What about a 4gb stick + 8 gig stick ? Will it work ? Thats the question.

@FuryFight3r

Жыл бұрын

@@serebbi when mixing RAM, it's always a gamble, sometimes it works without issues, other times it will make your system crash. Even now days when chips are all randomised you could buy 2 boxes of 8gb RAM from the same manufacturer and exactly the same type, but one set may be using crappier chips and may not be compatible with the other set. So again it's just a guessing game, only way to find out is try it 👍

@serebbi

Жыл бұрын

@@FuryFight3r Yup i will try it myself. If it crashes, i just put back my old stick right ? It will not affect any other component?

@FuryFight3r

Жыл бұрын

@@serebbi your computer will be fine from my past experience I haven't had an issue when testing types of rams together

I've got a 7700k office test bench that I played around with a bunch of different sticks a while back. If you can tweak them a little, they generally work just fine, but I wouldn't recommend it for intense or heavy workloads.

I've done mis-matched RAM for years. As long as my Frequency and Timing matched I've never had an issue.

@OriginalMergatroid

3 жыл бұрын

Same here. Worst case has been running them both at the speed of the slowest module. Works great for non gaming systems that don't really need the extra speed.

@OriginalMergatroid

3 жыл бұрын

@@espanalibre9505 Wouldn't check out four links without anyone mentioning why.

@hdezn26

3 жыл бұрын

@@espanalibre9505 Spam...

@hdezn26

3 жыл бұрын

I had a laptop which has mismatched ram in it and i think the timings arn't even the same either ... still works ( at least teh last time i checked it...)

@LokiCDK

3 жыл бұрын

@@hdezn26 yeah, generally they should all just down time to match.

Hey people! I want to add some personal experience to this this video - long story short - secondary and tertiary timings matter a lot as well when mixing and long term system instability can happened (random crashed no matter what after a few hours). But can be tuned to make the modules work together. The complete story is as follows - I have 2 different sticks from Kingston due to a needed upgrade to my system 2 years ago for the ultimate minecraft mod pack (yeahhh, 600+ mods and 8GB of RAM wasn't enough and yeah, I like minecraft) - I was on a very tight budget so a set of dual 8GB modules was out of the question and the original cheap stick was not available at all, even second hand. So I went second hand hoping to get lucky. The "new" one is rated at 2400, while the old one is 2133, both Kingston with the same primary timings. However, unpredictable crashes started happening after random amount of hours - might be after 1, might be 2, might be 10, which stress tests didn't reveal. And the frequency of them was growing month after month (I wounder why). I tracked it down to the the memory mismatch and had to actually down speed them to 1833 and get a lot worse timings to get the system to stop crashing so often. Worse yet, the crashing was not completely gone, just happened very, very seldom. A couple of months ago I got a second hand Z170 motherboard and got the exact same problem. So I decided to tackled this again and asked the wonderful folks at the LTT forum for some help. And someone suggested it could be the secondary and tertiary timings that are causing problem. So I set aside a weekend, read up on those timings (tuns out motherboard BIOS holds them, not the sticks), plugged in each module individually and recorded the 2ndary and 3iary timings. After comparing them, they didn't seem that off, but decided to stick with the slowest ones from both (basically mixed them) and decreased the refresh interval. Aaaaand all worked! The system was stable for 24 hours at 2400MHz none the less! ^^ Buuuut it doesn't end there - I overclocked the 2 modules to 2666 without a problem, 2800 was also possible, but not completely stable (even with more voltage). Maybe again the 2nd and 3rd timings? :p Best part - the H110 motherboard I have also allows for tweaking the secondary and tertiary timings! (but no overclocking for the RAM, soooo 2133 max speed). I hope someone finds this helpful and sorry for the long comment! Love your vids and wonderful community Linus and all that help make them! ^^

@sMASHsound

3 жыл бұрын

so ur saying, if u check to see which has the lowest timing, adjust the others to match, u can get them to operate at a better frequency? if that is so, then uve cracked the code. tnx

@louistournas120

3 жыл бұрын

What's a secondary and tertiary timing? I've never seen that in the BIOS settings. There are of course a whole set of timing values.

@shadowlord0162

3 жыл бұрын

secondary and tertiary timings huh? that sounds complicated

@astaroth_sasazaki_yt

3 жыл бұрын

for i am too lazy to read, i will copy and paste this and read it later just so you know, you are one good person and i aspire to be as kind as you are, have a good day

@hi_tech_reptiles

3 жыл бұрын

Great point man

Hello. I watched your video because I wanted to increase my FPS to a more stable one for my 144Herz monitor and it worked. I have 2x16Gb and 2X8Gb in all slots. They work at 3200M T/s CL 16-18-18 1.35V. I was afraid that it wouldn't fit, but after setting it in the BIOS, the performance is optimal for me.

my personal server is running 4 sticks from 3 different vendors with chips from at least 2 manufacturers. It's a minor miracle

"You've got to be very careful about how you populate your slots" Agreed.

@ethanlai1044

3 жыл бұрын

@Linus Tech Tips what

@johanneslinnemann6660

3 жыл бұрын

Pff... in our first PC back then (Pentium with 133 MhZ) we chuged in all the RAM we could, had 2 2 MB and 1 4 MB EDO-RAM or something like that in the end... worked just fine :D

@hueyrosayaga

3 жыл бұрын

@@ethanlai1044 It's a scam, don't do it! Look how that account is missing the checkmark!

@bubbledoubletrouble

3 жыл бұрын

@@ethanlai1044 Scammer using look-alike letters

@emperorpalpatine5559

3 жыл бұрын

@Linus Tech Tips You arent fooling anyone

"if you try it and there's no performance difference, then there's unlikely to be a performance difference"

@lifeinsocialism

3 жыл бұрын

@Linus Tech Tips Nice try bot.

@sanjacobs6261

3 жыл бұрын

@Linus Tech Tips Not even a half decent try, bot.

@OnlyHerculean

3 жыл бұрын

Ah the floor is made out of floor

@HelmsL0L

3 жыл бұрын

Every sixty seconds in Africa a minute passes

@OrangeC7

3 жыл бұрын

The archer clan really is made up of archers!

Hey so im still pretty new to owning a pc and i am wanting to get more ram because i just dont have any space left. And i was wondering if i have to do anything about my old stick of ram like transfer data or if i can just remove it and put in a set? I just dont want to mess anything up or lose anything

Mixed 2 different sets of ram twice in my life, both times that was kingston modules. First time - old ddr3 sticks, 2x2GB and 2x4GB. Worked fine. Second time - a month ago, bought 2x8 Kingston Fury modules to my pair of HyperX Renegade, also 2x8. Both was 3200ghz, both working OK on 3200 GHZ together.

Everybody gangsta till glasswire can see future network activity

@uberfuzzy

3 жыл бұрын

Its just a tiny precog in a box, like a closed prefilled AIO cooler.

So, we are not gonna talk about how Madison suddenly didn't have gloves on at the start?

@Leo2000___

3 жыл бұрын

They thought we wouldn't notice...

@BeastMode070subscribe

3 жыл бұрын

U a redditor

@ungefeiert

3 жыл бұрын

@@sr_bob m dawg sounds more gen z, imo

@itskdog

3 жыл бұрын

I thought she'd still technically be under probation...

I ran into BSOD issues (But only with XMP enabled) after adding 16GB using the same model number RAM from Corsair. The kits worked independently and both passed a Memtest, so mixing can be a bit of a lottery. I ended up getting different vendor die.

@Kitten_Genocide

6 ай бұрын

Good to know. I currently have a Corsair vengeance rgb rt (2x8) CMN16GX4M2Z3200C16, I was planning to add a 2x16 kit with as close spec as possible. I guess I'd have scrap that plan after all.

I did this back when DDR3 was a few years old, I wanted to upgrade and bought some random DDR3 stick. It worked fine but when I wanted to get more RAM later on and did the same thing I had to fiddle around in the bios (and I was in high school if I remember correctly) which was a lot of pressure, thinking I could just screw everything up. Anyhow, I got it working in the slowest speed RAM's clock speed and it all worked out fine, but still, I was a lot more careful after that...

Madison is so freaking powerful that she can remove her gloves and put them back in less than a second ! Continuity my friends, continuity ...

@fadelpw511

3 жыл бұрын

cinema sins ding.mp3

@gregorianeg5311

3 жыл бұрын

It was just Dr. Maddison and Mr. Linus

@mobilePCreviews

3 жыл бұрын

That was only a fraction of her true power.

@smoothcortex

3 жыл бұрын

Small production. They don't have the resources to catch small mistakes like this....if only Linus had more staff.

@pepijnkrijnsen4

3 жыл бұрын

@@smoothcortex video next week: "we're hiring for a continuity manager..."

Linus I have an interesting idea about the next Secret Shopper. Use a decoy shopper. Make one well-known person call the company's and also make another not-so-known employee do the same thing. Do this on all stages of Secret Shopper and compare how the company's (Dell I'm looking at you) behave when they know Linus is calling them and how they behave when they don't.

@laerin7931

3 жыл бұрын

From watching those videos, I have serious doubts that Dell tech support would have any idea who Linus is.

@skrbik1056

3 жыл бұрын

they woud have to spend 2x mony on it. It woud be cool but, you know mony is money

I used to run two different memory size kits from different manufacturers but with the exact same specifications. I never had an issue.

I tried upgrading from 2x8GB G.Skill Trident Z 3200 (16-18-18-36) to add another kit of the same and couldn't get it to run stable above 2600 MHz. Turned out my CPU was the problem, as I found plenty of posts saying the integrated memory controller on Zen+ wasn't that great, so I ended upgrading from my 2700X to a 5700G.

@oliwierwarchal

6 ай бұрын

Exactly my experience, tried at least 4 kits of memory and none of them worked properly on my Ryzen 2700X, switched to 5600X and even 48 GB (32+16) is running stably.

I like how Madison ist wearing gloves in the intro, but a bare hand puts in the dimms in the close up :D

@chaitanyapundeer5999

3 жыл бұрын

That could have possibly happened bcz nobody would have trusted her with the dimms lmao🤣 No offence tho

@dhruvupreti5120

3 жыл бұрын

Nice observation 👌

@Linerunner99

3 жыл бұрын

Because the intro is a parody of Frankenstein... where the rest is just normal life.

@Luukebaas

3 жыл бұрын

You're so german

Linus: It barely matters Me: Shiiit, mate. That's all you had to say. "closes video"

@hueyrosayaga

3 жыл бұрын

@Linus Tech Tips SCAAAAAAAAAM, YOU DON'T EVEN HAVE THE CHECKMARK!

@ryanborax7851

3 жыл бұрын

💀💀

@h1ghe3a44

3 жыл бұрын

Today's bots are way worse. I don't get it.

@ItachiUchiha-69

3 жыл бұрын

@@h1ghe3a44 As technology advances, bots are going to get continually worse. I’m pretty sure it’s a direct result of capitalism. That’s not to say it doesn’t happen in other countries, it’s just to say that if everyone has access to a free market this is going to happen a lot. It’s annoying as hell.

@shameermalik5540

3 жыл бұрын

@Linus Tech Tips i would like to invest. I trust Linus.

I bought a prebuilt before I knew about PC parts. Sadly it only came with a single stick of DDR4 8GB. A year later after that, I wanted to expand the ram but I couldn't find the same stick that had came with my PC, so I bought a stick off Amazon, I made sure to find the same size and speed. It all worked fine and it got me to 16GB with no problems. A year after that though, I wanted another stick of ram but I couldn't find the same stick that came with my PC or the one that I had bought prior. So I ended up buying two more sticks with the same speed and size and it worked. So now I have 4 sticks, each with 3000mhz, and 3 different types of brands. I haven't noticed a single issue and my PC is running great.

I tried this out cause some sticks were just laying around. I had some corsair platinum and I currently had some vengeance in my pc. They were both clocked at 3200 and I figured well same brand same speed. So I tried it haven't had any crashes or any performance drops either. Been like that for about 6 months now so I got lucky.

i like how you didnt let her insert the ram stick by herself and instead cut to a close up of someone else doing it :D so good

@toastcart8211

3 жыл бұрын

5

@potto1488

3 жыл бұрын

a sex bot copied your comment lmfao

@user-po6zt8if4c

3 жыл бұрын

@@potto1488 Technology really is advancing.

@potto1488

3 жыл бұрын

@@user-po6zt8if4c true

@DarkNexarius

3 жыл бұрын

Thanks I didn't notice that blatantly obvious cut and now I feel stupid.

I love the wide shots of Madison wearing gloves and then the close up of the ram insert is a glove-less hand. Peak comedy.

@J37182

3 жыл бұрын

@Lo Fell how is he simping lmfao

@J37182

3 жыл бұрын

@Lo Fell where is he simping lol

@Turt3752

3 жыл бұрын

@@J37182 “if you act any sort of friendly or appreciating towards any FeMaLe you’re a perverted simp” - incels

@FrankieIpp

3 жыл бұрын

@Lo Fell She's funny, it's like Anthony but you feel uncomfortable because you are a child and girls scare you

@FrankieIpp

3 жыл бұрын

@Lo Fell nah dawg I'm engaged, I just like seeing someone be successful, unlike you obviously.

when I built my old computer, I didnt pay attention to the clock timings, just the clock speed, I went with 2x8GB Ripjaw V 3200mhz. My new computer from EK Fluid Gaming came with 2x8GB Trident Z 3200mhz. the Trident Z were CL16, and i was kinda shocked to find out my old ripjaws were CL14... so of course I put the Ripjaws in the B channel on my new rig and set them both to 3200mhz CL16 I wasnt sure if it was a good idea because of the myth, but it definitely didnt hurt anything, and I guess I'll find out if it helps when I get around to giving my computer a real workload.

Heck, I have 2 separately bought sets of Corsaid RGB Pro 2x8 3000 sticks that won't run together at rated speed on an Aorus x470. Had to turn them all down to 2666 to make them work at anything other than 2133. Read it is something about the motherboard having issues, I dunno. Good video LTT

Somebody at edition thought that we wouldn't notice Madison's gloves disappearing on that memory close up XD. Seems that they won't let her really touch a computer lol.

@JRockThumper

3 жыл бұрын

Lmao

@samikjain5837

2 жыл бұрын

There's some creature on your profile picture

I've mixed memory for years and never had issues in hundreds of computers and servers by just matching the MHz

@vincentschumann937

3 жыл бұрын

I have i system with 6 different sticks (ALL are different size, speed, latency) overclocked it to the moon and it just works (DDR2)

@BigBoronto

3 жыл бұрын

@@vincentschumann937 Is it weird that I wanna see thia?

@vincentschumann937

3 жыл бұрын

@@BigBoronto it isn't if you're into computers and it only works in one order for me but my combination is a bit brutal

@United_Kangaroo1992

3 жыл бұрын

Newbie here. Would it hurt or help to have 3 sticks of ddr4 in my hp office machine? (Used for light gaming, eventually there’s a possibility of streaming)

@Mr.Patchy

3 жыл бұрын

@@United_Kangaroo1992 As long as the sticks are all similar enough, more memory is more good.

The old PC I did this with that my friend now owns was a FX 6300 build on DDR3 ram at 1666. I paired a set of 2x4gb Ripjaws with a 2X4gb set of Adata and it just worked. no bios fudgery nothing. So it's been somewhat possible since before DDR4... Obviously that's not a desirable system anymore but it helped me keep the system running as well as possible until I let it go...

08:52 - Linus spit tips 😀? I've run various different RAM sticks in many PCs and never encountered a substantial problem. Sure, timings should be equal and they will only run as fast as the slowest stick - but many times it was just an upgrade for a "family PC" that mostly did word processing.

I love how Madison didn't actually insert the ram in the intro.

@brettmayo4354

3 жыл бұрын

I didn’t notice that 🤣

@babute21

3 жыл бұрын

who is that girl

someone needs to stop the sponsors linus is starting to refer to himself in the third person

@zmazn

3 жыл бұрын

ikr what the frick

@b00gyman1

3 жыл бұрын

Linus is getting upset!

@liambergstrom8183

3 жыл бұрын

@@b00gyman1 man I really want to know the context for that clip

@timurtheterrible4062

3 жыл бұрын

That's because Linus is now sponsoring Linus.

@b00gyman1

3 жыл бұрын

@@liambergstrom8183 you got it man kzread.info/dash/bejne/poBtrMmGpJfVm7A.html

I originally had a set of Gskill ram (2x8gb) at 3600mhz, and added a pair of corsair vengeance PRO RGB (2x8GB) at 3000mhz. the corsiair ram overclocked perfectly and is super stable without even changing the xmp profile

Interesting, didn't know this wasn't recommended. A few years ago one of the four 8 GB RAM modules in my desktop died, so I replaced it (and its matching partner, I got two sets of two a few months apart) with two 16 GB modules for a total of 24 GB. That was the end of 2018, I think, and it's been running perfectly for me ever since. I didn't run any benchmarks or anything, but I haven't noticed any performance differences.

@Brunnen_Gee

Жыл бұрын

It's not really a thing that's recommended or not recommended, it's one of those "if it works, it works, if it doesn't, find a different solution" things. Mixing RAM is a rather common practice, and usually works out fine.

Of course her cameos are more elusive than Stan Lee showing up in MCU movies.

@angrysocialjusticewarrior

3 жыл бұрын

First time I read your comment I mistakenly read "cameos" as "cameltoes".

@roundcube2948

3 жыл бұрын

@@espanalibre6065 ​ spammy trash using lazy and scummy promotional tactics - may your dislikes be plentiful and unwavering

I mean that's all nice and all Linus but DID KNOW YOU CAN DOWNLOAD MORE RAM?🐏🐏

@VERSA6969

3 жыл бұрын

And that's why I have 69000 ram stored in my hdd!!

@zeronxepher

3 жыл бұрын

@@VERSA6969 Pffftt I have 69420.

@robbietorkelsonn8509

3 жыл бұрын

Works even better in linux: Just need to enter: echo "Successfully installed `head -n 1 /proc/meminfo | tr -s " " | cut -f 2 -d " " | awk '{print $1*2}'` kB" That will be 75$ ... pretty please

@ShFred

3 жыл бұрын

@@VERSA6969 I'll bite. bUt ThErE's No WaY tO dOwNlOaD rAm, YoU'rE iNfEcTeD wItH vIrUs nOw!

@idontknow8734

3 жыл бұрын

Lmao some ppl take this seriously. Anyway thats haliarous

Back when ddr3 was just comming out, it was quite expensive and I was on a budget so I got ddr2. My motherboard, however, had 2 slots of ddr2 and 2 slots of ddr3. Sometime later I needed more memory so I got 2 sticks of ddr twice the capacity that I had. It actually worked with both, it didn't have the full combined capacity and I don't remember what speed it ran at but it was very stable.

@mustafachoudhury3368

Жыл бұрын

Gigabyte G41-combo mobo?

@cjnf11

Жыл бұрын

I got 16 MB SIMM RAM from my 80386 to my P1 PC. Then I got a Celeron PC that was better than this P1, its motherboard had both SIMM and DIMM slots, and I've used these two SIMM and.. one newer DIMM I think. Also I gotta note somewhere at that time I had an ISA soundcard that had SIMM slots to expand its MIDI bank loading capabilities, so I used those here too.

I always mixed my RAM and never encountered a problem. Back when every single MB counted I had 3 different sticks of RAM (512, 256, and 128MB) from different brands and running at different speeds.

@brandonscherrer6487

2 жыл бұрын

Do you think i can throw a trident x royal 64gb on a ddr5 board?

@jamesr9400

2 жыл бұрын

@@brandonscherrer6487 depends on how good at welding you are

@thesnake1862

Жыл бұрын

@@jamesr9400 lol

@caade_1967

Жыл бұрын

The only thing that doesnt work is when they run at different speeds. Your bios will automatically set them all to the lowest one you have. You could also overclock it tho

@mayukhsreejith2776

Жыл бұрын

@@brandonscherrer6487 No since it is ddr4. Which will not work on a ddr5 board.

You should let Madison help a ROG winner build their pc. So she can feel how Linus felt when he helped Madison build hers.

@MrCODEmaster00

3 жыл бұрын

Pretty sure ASUS pays a lot of money for the Linus factor though. Like a contract kinda thing

@dingle2987

3 жыл бұрын

Who were the ROG winners because I could not find my email😉

@the_retag

3 жыл бұрын

Lol i dont think madisons gotten good enough at building for that

@winteronice

3 жыл бұрын

Evil genious

LTT has given up on actually segueing to their sponsor, now they segue to the segue and cut abruptly to the sponsor spot. The word segue has lost meaning and I love it.

@XX-121

3 жыл бұрын

it's cringe as hell and made for elementarty school children. insults anyone with any level of inteligence and makes me want to not even click anymore. especially when he puts those nasty underwear ads up. i mean, if your making content for kids why include that crap? no one wants to see that crap, gross. maybe start selling womens underwear or something if you're that desperate. i'm getting to the point of almost avoiding their content. but i am not a child so...

@1992jamo

3 жыл бұрын

@@XX-121 It's just an advert... Skip it if you want to. It's a shame that they need adverts, but this platform is free to use.

@mrblurleighton

3 жыл бұрын

trance dj What's wrong with undies though? Also the laid back vibe is good sometimes. Why so serious? They don't take themselves too seriously, and neither do we. Why do you?

@Lysergic_

3 жыл бұрын

@@XX-121 just stop watching bruh it's clear you just aren't a fan anymore. Nobody cares about an underwear ad, cause everyone wears it. Unless you don't, which is why you find it gross... anyways, you have an L key. Use it next time you see someone mention anything about a sponsor, it'll change your life. Also, if the content is made for children, then how would avoiding it make you a child? It's questions like these which are why I say you aren't a fan anymore. When critiques don't hold much logic behind them, it usually means there's a form of bias instead

@theneha1992

3 жыл бұрын

JPnewPic88.Men

This saved me! And a lot of others I know Thanks!!

I just upgraded some ram on a old PC. I used some cheap Timetec DDR3 ram (8x2GB) and mixed it with some old unbuffered ECC ram (4x2GB) and it seems to be working good so far

I just realized how much Madison and Colton look alike, especially when Colton wears glasses. Welcome to the team, Madison!

@hueyrosayaga

3 жыл бұрын

@Linus Tech Tips Yeah, no one is falling for this scam

@HDReMaster

3 жыл бұрын

@@hueyrosayaga saldy a lot of people do

I think this is an interesting issue when addressing “upgrading” a laptop, I had success upgrading a laptops RAM a few years back when I replaced its free slot with a 16gb ddr4 that was the same speed as the soldered 8 but in the long run I’m not sure if the slight performance improvement I experienced were worth the hassle or getting it working, however it’s still something I find interesting and ends up influencing my purchasing decisions when buying a laptop.

@matthewwatt2295

3 жыл бұрын

My work laptop has 8GB soldered and our IT upgrades them with 32gb DIMMs in the free slot, no issues so far but web development isn't super heavy on memory.

@XX-121

3 жыл бұрын

yeah most of the time if you don't buy ram that's been certified by your laptop vendor for that model, you'll get super slow speeds and timings looser than a crack hoe.. and there's no way to change it in bios like you can w/ a desktop so you're just stuck w/ what you get. sux.

@danielbarnes3406

3 жыл бұрын

I did the same, and 24GB was definitely better than 8GB, for my purposes anyway (software dev, VMs)

When I bought what I thought was the exact same ram, it had a different controller but otherwise was the same. It doesn’t overclock well at all now but it runs fine at it’s rated speeds.

Hey Linus! I was watching this vid because I was planning for an upgrade. I have a question though for another topic. What difference does it make if for example I use an old (like 5 years old) HDD than buying a brand new one to pair up with my SSD?

@lettuce7259

2 жыл бұрын

Don't bother with a hard drive, I would save up a bit more for a second or Bigger ssd

@ruekurei88

2 жыл бұрын

@@lettuce7259 Disagree. Buy an SSD and use it as your main boot drive. Buy an HDD for general storage.

I feel like the most common memory mixing scenario would be two mismatched 2 stick kits. You may have tested that, but it wasn't super clear

@ademiravdic

3 жыл бұрын

Yeah, as far as I saw it will be no problem, unless you trying to go for xmp way above slowest modulr

@xqr2911

3 жыл бұрын

Exactly this. Most people having 4 RAM slots get at start 2 stick to run in dual channel and then as time goes there's option to put another 2 sticks which are different. They should test this but they did not. I would like to get an answer what configuration of slots is optimal for pairing different sticks for dual channel. Should each channel should be exactly the same (so 2 different sticks per channel) or is it better to put one brand in first channel and other is second channel?

@RichFreeman

3 жыл бұрын

@@ademiravdic yeah, I really didn't get what they were going for. Obviously you're not going to be able to clock way above the slowest stick, so that was hardly news (getting a 2666 stick up to 4000?). I'd be more interested in what happens if you're running at 3600 or whatever (maybe XMP), and you buy another set of 3600 RAM with comparable timings, or maybe a faster set. Does that cause issues? That seems like the sort of scenario an enthusiast would actually run into. And of course run it at the slower of the two timings.

@Thermalions

3 жыл бұрын

@@RichFreeman Agreed. I can't be bothered manually messing around with overclocking, but might want to upgrade from basic XMP 16GB to 32GB and just happy if I don't see a performance drop. You're unlikely to be able to overclock a *matched pair* of 2666 sticks up towards 4000 without a lot of luck and much manual tweaking, why would they choose that as their test scenario for unmatched sticks/pairs? Out of touch will real users comes to mind.

@dutubenbenutzer9

3 жыл бұрын

yeah, why on earth did they test 4 different modules but not this config?

So if I download my memory on Chrome I can't mix it with memory I downloaded on Firefox

@MinistryOfMagic_DoM

3 жыл бұрын

But you can mix it with RAM you download on Edge because they are both Chromium based.

@homegeographic5351

3 жыл бұрын

so if you think you make a smart joke you remain id!otski for ever

@danieladamovic9273

3 жыл бұрын

lol

@squabbbb

3 жыл бұрын

Free RAM is open-source, so you should be able to find multiple sites with compatible RAM. Just make sure the toolbar you install looks the same and you should be good

@lumityandowlhousefan

3 жыл бұрын

Overclock it.

Yeah my nas server currently runs ecc and nonecc ddr2 memory and somehow it's in dual channel :) Depending on the chipset of your motherboard you can do some crazy things with your memory :)

If i get the same 3600mhz cl16 but diffrent brands is it ok? I currently have crucial ballistix 16gb (2X8) 3600mhz cl16 but can’t find this midel and brand any where at the time all i can fund is a corsair kit but it is a 2X16gb kit

Who else checked the comments to see how many people are hyped about Madison coming back Edit: holy crap 1.1k likes

@joshuahendricks3552

3 жыл бұрын

She runs LTT tiktok as well

@edszab

3 жыл бұрын

Lol

@deluxemc8885

3 жыл бұрын

yep same just saw her and was like yep people are gonna comment about this right away

@veniulem5676

3 жыл бұрын

who?

@squabbbb

3 жыл бұрын

@@joshuahendricks3552 Linus Tok Tips

"we created a bass line" and yet I hear no bass

@marlonwaardenburg654

3 жыл бұрын

sad times

@fsisrael9224

3 жыл бұрын

NOT EPICO

@dukemanu9580

3 жыл бұрын

bass below 20 Hz

@marcusbunce3406

3 жыл бұрын

Huh 🙄

@patrickj

3 жыл бұрын

It's so deep.

I have an asus tuf B450, Using the latest bios update to date with a Ryzen 5 5600x, I use to use 2 different kits of 16GB ram gskill F4-3200C16D-16GVKB. Individually, they could reach 3200Mhz, but together (using the DOCP profile) they both reached a maximum of 27333Mhz at 1.35 volts with my old Ryzen 5 2600. After changing the processor (Ryzen 5 2600) I got the same behavior with these kits BUT, I decided to test the DOCP profile, but, pushing the voltage up at 1.37,5. Wooalah! It's working now, memtest pass. 2 different kits of ram (same brand, same model). Great Brand Gskill, great Motherboard (ASUS B450 upgraded BIOS for Zen 3). Great CPU, Ryzen 5 5600x.

I have [Klevv Kras-X (8x2_16gb) 3200mhz (16-18-18-38) 1.35v] and its somewhat hard to find in my area and its more expensive than other RAMS so I went to buy [TeamGroup T-Force Vulcan-Z 16x2_32gb) 3200mhz (16-20-20-40) 1.35v] and at first finding the proper slot for the ram is problematic but after few trials everything worked and XMP set all my RAMS to 3200mhz (16-18-18-38) 1.35v at a total of 48gb RAM size and how I thought timings would be (16-20-20-40) hmmm, first time doing it and so glad it worked well together without problems. Thanks Linus!