How-to Set Feed Timing on SINGER Sewing Machines using the feed worm gear and feed ring gear.
Жүктеу.....
Пікірлер: 14
@toonybrain3 ай бұрын
Short, sweet, very helpful. Thank you.
@npaisnel5 ай бұрын
Amazing ! A succinct straight to the point video. Some on here have taken 39 minutes to show that or needle timing ! Thanks !
@killerkadaver2053 жыл бұрын
This video saved me from going to a repair shop! Thank you so much ^^
@haint77095 жыл бұрын
Thanks for the video! It really helped after I replaced the feed dog gear.
@deborahhock4903 Жыл бұрын
Thank you, thank you!
@sewingmachinedoctor5 жыл бұрын
nice
@danijeladigiulio94824 жыл бұрын
can you please let me know which tool you used to tighten the gear? my guess is an alen wrench? I cant tell what to use'
@dorothygeerlinks8271 Жыл бұрын
I reset the hook and feed dog timing for my singer stylist 534 and it works fine with the straight stitch. However the zig zag timing is off. The needle slides over when it is penetrating the material instead of when it is at its highest point. How can I adjust this?
@RuthDeanQuiltNGo Жыл бұрын
I have my singer quantum 9960 apart and am trying to see why the backside of my feed dogs are not all the way up when the dogs are in the up position the front of the dogs are up. There is a nut/small threaded plastic piece and a pin attached to the plastic piece that I believe the pin came out of it home. How can I fix this?
@debbiecreekmore31676 жыл бұрын
How do you fix the timing on a singer 5050C? I used the pattern that is on the to right once, then it would not sew but a straight stitch. So I cleaned the machine, took the bobbin out (very hard to get the that holds it down), cleaned under, now it will not pick up the thread. I need the specific video for this machine. Can you please help me?
@SINGERonlinecom
6 жыл бұрын
You can watch the timing on the Singer 750 video on our website. It's not exact to the 5050C, but it will work. Hope this helps! Here is the link: kzread.info/dash/bejne/X6l6w8t_pbaZfdo.html
@g.neault7912 жыл бұрын
bonjour, , would you have the same thing in french? thank you also, I can't see well because the plate is not removed
@The_Deliberate_Photograph3 жыл бұрын
I have a Singer 648 and it doesn't appear to have any set screw adjustment for the timing of the feed dogs! I can easily set the hook timing, but the cams that adjust the feed dogs are only visible from the top of the machine, and do not appear to be settable. Help!
@naughtybynature62134 жыл бұрын
You need to take that plate off so that we can what it looks like
Пікірлер: 14
Short, sweet, very helpful. Thank you.
Amazing ! A succinct straight to the point video. Some on here have taken 39 minutes to show that or needle timing ! Thanks !
This video saved me from going to a repair shop! Thank you so much ^^
Thanks for the video! It really helped after I replaced the feed dog gear.
Thank you, thank you!
nice
can you please let me know which tool you used to tighten the gear? my guess is an alen wrench? I cant tell what to use'
I reset the hook and feed dog timing for my singer stylist 534 and it works fine with the straight stitch. However the zig zag timing is off. The needle slides over when it is penetrating the material instead of when it is at its highest point. How can I adjust this?
I have my singer quantum 9960 apart and am trying to see why the backside of my feed dogs are not all the way up when the dogs are in the up position the front of the dogs are up. There is a nut/small threaded plastic piece and a pin attached to the plastic piece that I believe the pin came out of it home. How can I fix this?
How do you fix the timing on a singer 5050C? I used the pattern that is on the to right once, then it would not sew but a straight stitch. So I cleaned the machine, took the bobbin out (very hard to get the that holds it down), cleaned under, now it will not pick up the thread. I need the specific video for this machine. Can you please help me?
@SINGERonlinecom
6 жыл бұрын
You can watch the timing on the Singer 750 video on our website. It's not exact to the 5050C, but it will work. Hope this helps! Here is the link: kzread.info/dash/bejne/X6l6w8t_pbaZfdo.html
bonjour, , would you have the same thing in french? thank you also, I can't see well because the plate is not removed
I have a Singer 648 and it doesn't appear to have any set screw adjustment for the timing of the feed dogs! I can easily set the hook timing, but the cams that adjust the feed dogs are only visible from the top of the machine, and do not appear to be settable. Help!
You need to take that plate off so that we can what it looks like