It excites me that the freehub design would allow you to switch the spring and pawl round and make the freehub work backwards. If only more of my friends had hope hubs so I could play a trick

@RobbiePfunder

4 жыл бұрын

lol

Hands down the best Rear HUB ever manufactured! The sound is even better!

@VirtuousCyclesShop

7 жыл бұрын

sound? more like noise; good luck spotting any wildlife on the trail; you'll scare it all away the moment you stop pedaling. You'll get better engagement with a roller or sprag clutch hub. and you'll coast in peace. Hope makes great stuff but enough with the louder = better.

@jamesgadd5322

7 жыл бұрын

quiet hubs kill. poor deer never heard me coming. sound saves lives.

@mindedchaos

6 жыл бұрын

a1147538 true true I got a video on my channel of mine

@justinholmes5614

6 жыл бұрын

Virtuous Cycles It’s handy where I am. Lots of dog walkers on the trail who will walk in front of a quiet bike. The noise gives them a chance to get their dog under control so it doesn’t munch at my heels.

@Grincannabis

2 жыл бұрын

@@justinholmes5614 🤣

Excellent video! Thank you for posting this.

Great video.... Did mine last night with Blue seal bearings from Trail vision Silkstone.... £17.99 for the set of 5.... Runs mint now... Easy enough to do... Thanks for the video

"Just gently" - THONK THONK THONK - "tap the seal out"

@CJinsoo

Жыл бұрын

just did my Pro 4 a couple of weeks ago and it was “wham, wham, wham!” with a rubber mallet. next time I going to buy the hub tool or find a similar piece of pvc from home depot. it would be a lot easier with stable supports

thank you !!! i fixe my problem of friction beetween the "cover" of the free wheele and himself

very useful video , thx

greatest videos ever, thanks a lot.

@chainreactioncycles

2 жыл бұрын

Glad you liked it!

Wow, I realy want to experience the performance of that hubs

If you don't have the bearing support tool, when putting the new bearings on the axle you can probably just use the old bearings as a guide, right? So put the old bearings on top of the new bearing and use the mallet on the old bearings?

Could you List the tool and equipment part numbers you use here? thanks!

when he puts the springs in it is critical that the long edge be closer to the inner diameter. if you put the springs in with the long edge closer to the outer side then the hub won’t work properly. you will be able to pedal, but every so often nothing will catch and your crankset will spin around, happens most when you are ratcheting.

Where can i get one of those grease guns? Does it come preloaded or can you refill it and what kind of grease are you using? Great video

what grease gun do you use? looks like the sort of thing I am after.

Completely unrelated, but that a beautiful watch you are wearing. What watch is it? Very helpful video by the way thanks.

The spacer between freehub body and hub body is already broken, is ther any spare parts available or you can make a diy?

So the plat side of the non-drive side seal is facing the hub and the tapered side facing the hub end cap?

Does anyone know if the drift is commercially available or if it was a "home made" one?

What lubricant do you use for the hope pro 2's? I have the 40t if that makes a difference

WHAT BRAND IS THAT GREASE GUN???

He said gently tap, and bang

Y una q tenga balines se le puede instalar rodamientos al menos en un costado agradezco una opinión

Also (and arguably more importantly) why doesn't the bearing press tool have a way of locating it? Seems like a missed opportunity.

Banging 👍

Gentle tap *BANG BANG BANG*

Good video, managed to service my own hub. Some remarks: * pop the caps off -> took me half an hour. Mole grips eventually made them come off easily, just pull straight away from the hub. * at the end on the non-drive side a seal is put back on with a tapered and a flat side, but the video doesn't mention which side goes up. I tried to follow the seal when he handles it, I think the tapered side goes up. Best to check before you remove it. * the freewheel should pop in with a special tool, for me it never clicked in like in the video, it just fell in place.

@jasweb147

4 жыл бұрын

I can't get the free hub body out. I'm using vice grips and still no luck. It's brand new, never used. Any suggestions??

@jasweb147

4 жыл бұрын

Just got it off. Pain in the butt!!

@nicomommaerts60

4 жыл бұрын

@@jasweb147 I'm glad it worked out for you!

Were the heck u could buy that drift?

What kind of grease you have tu use ? Very useful and nice video !

@Greenjuiceman

7 жыл бұрын

this really is a great video - I must admit that I have tried loads of different grease during my 40 years of cycling but the best one has been AeroShell Grease 6 that a helicopter pilot suggested I try - he gave me a small sample and I have to say that it really is fantastic - I would highly recommend it and it is not that much more expensive than a basic lithium grease - one tin would probably last a lifetime and just wait and see and feel the results - please post lots more videos

where appropriate for bicycle polygon xtrada 3.0

Was für Kugellager benötige ich zum Wechsel?

how much below the hub shell must the drive side bearing sit ?

@bakedbass

7 жыл бұрын

obviously measure yours before its too late

What freehub body is it

0:55 “gently tap” -kung fus that shit

I cant get the left ( brake side ) Adapter from the Axel! Need help please.

@brandonreimer184

3 жыл бұрын

If the hub has been assembled for a long time things can get stuck. Try soaking with penetrating fluid, if that doesn't help try putting it in the freezer overnight then let it warm back up sometimes that will help free things up. If it is still stuck try freezing everything then while the axle is still cold heat only the spacer it is tricky to heat the spacer while not heating the axle. Try to not use any clamps as it is quite easy to Marr up the axle. Most importantly BE PATIENT! Don't give up and good luck!

How much for that set of tools ?

사용하고 싶은 허브 입니다.

My wheel is wobbly and the wheel is tight, I have hope pro2 hubs any ideas what it could be??

@james-to8pe

8 жыл бұрын

have u made sure that your qr spring isn't jammed. this happened on my front hub it seems tightly done up but it isn't making your wheel wobbly.

Where can i get tools like these? ohh, nice watch :)

@richardgilbert5339

7 жыл бұрын

For the pro 2 hub, ChainReactionCycles, for the Evo, Ebay

qual valor desse cubo

Hope hubs are really f*cking nice hubs. Not cheap like i thought

Does this work for the pro 2 hub as well ?

@greeenjeeens

Жыл бұрын

The hub shell of the pro2 and pro2 evo are identical. The axle and freehub are different on the pro2 evo, but the procedure I assume is similar.

Anyone who can explain the difference between the pro 2 evo and a pro 2??

Grease used in video is Mobil XHP 222,

@radekst5279

5 жыл бұрын

better is shc 460

@johnwatson8192

9 ай бұрын

@@radekst5279 It would be helpful to others if you could explain why you think that this is better?

@krautergarten4529

2 ай бұрын

​@@radekst5279why? It has 10% water washout, xhp has 5% ...

@radekst5279

2 ай бұрын

@@krautergarten4529 In my opinion. SHC is syntetic, xhp is mineral. Is not easy to wash away SHC 460, even with degreaser. Xhp 222 is more solid, "stickier". SHC 460 is more "loose". In matter of hubs, spindles, i rather use grease that is less "breaking". Each one last more than 6 months period of maintence. In my use, once by year.

@krautergarten4529

2 ай бұрын

@@radekst5279 ah check. Thx 🤘

How to pull out the bearings from freehub and bicycle hubs without using a hammer. All bearings will be hammered even we used rubber hammer. Saigon Bike Shop will tell you how to do! kzread.info/dash/bejne/p62XrbCBepu-h8Y.html

Hammer ? No comment from Россия !

@Ibedhostelsamui

5 жыл бұрын

ВЕЛОКУЛИБИН ЕВГЕНИЙ วงสาทาาาานยยงงงงงว่า มวยบใใใวววงบวบบวบวววบวววยยวยววมวลบสวยสวมบวนบสยวนยยยยบน. ทาสยชบลลลบบลลบงงบงงบบลบบบงบลลลลลลลบวฝวววงบงงวงบวงงงงงงงบววววววววววบววมสสสวว้้แตีย ท ทายยนจลบบบบบวววววงว งงงงงงงง งงงงงงฝฝฝฝฝฝงงงงงงง งงงงงง

Haha! On my fixed gear cx bike I like my front brake super noisy. Lets people know get the hell outta the way!

which grease do hope use for the hubs ?

@HugoMNF

7 жыл бұрын

Streetbikeboeddi I too need.

@Greenjuiceman

7 жыл бұрын

this really is a great video - I must admit that I have tried loads of different grease during my 40 years of cycling but the best one has been AeroShell Grease 6 that a helicopter pilot suggested I try - he gave me a small sample and I have to say that it really is fantastic - I would highly recommend it and it is not that much more expensive than a basic lithium grease - one tin would probably last a lifetime and just wait and see and feel the results - please post lots more videos

@HugoMNF

7 жыл бұрын

Greenjuiceman AeroShell Grease 6 ? Its mineral.

@harzenduro

6 жыл бұрын

Mobilgrease XHP™ 220

Sonho

Каким смазки лучшие смазать Hope???

these hubs are so expensive I can't afford them so stick to shimano which works really well

@Grincannabis

2 жыл бұрын

100€ hope pro 4 135x12

Never ever, ever, ever trust a man with a gold pinky ring

Ho 😐😐

И это видео от производителя? Подшипники не выбиваются и не забиваются. Их запресовывают. Любой удар по подшипнику это вероятность создать раковину. А это не хорошо

fucking BEARING not BARE IN

@johnwatson8192

11 ай бұрын

If you want to comment on the pronunciation of bearing don't start the sentence as you did.

@ahitler5592

11 ай бұрын

@@johnwatson8192 wow it's been a long time. Thanks