I watched a tutorial that was 10 hours explaining what you just simplified in min. Thanks for this

@ShotgunScream

4 жыл бұрын

calvinclyke glad you liked it brotha! More to come.

Simple and effective without the long winded explanations found in other tuts. Best part is, it actually works exactly like what I'm seeing from your tut. Like sub.

subscribed! A really helpful tutorial I can't wait to finish my character sculpt and put these on. The formsoft brush is so amazing never used it before but it will definitely be one of my fav brushes!

@ShotgunScream

5 жыл бұрын

Thanks so much for the subscription! Greatly appreciate it. Even more thrilled that this tutorial helped you. Keep sculpting away!

Thanks, Shotsguns Cream!

Absolutely brilliant! Using your technique has caused my characters face and surrounding skin to explode with life. Thankyou for sharing!

@ShotgunScream

5 жыл бұрын

Yold Man my pleasure and thanks for taking the time to share such kind words

Thank you, was about to buy a skin brush package, you saved me some money.

@ShotgunScream

4 жыл бұрын

Awesome! Glad to hear it! I always enjoy bringing some value to fellow artists. Share the video when you get the time. I would greatly appreciate it!

Yeah this helped me, subscribed. Ditto that Hair Tute ! Much needed, real appreciated.

@ShotgunScream

5 жыл бұрын

Thank you for taking the time to leave some kind words. Glad it helped!

This channel is gold, and you are gold, kind sir!

@ShotgunScream

5 жыл бұрын

Thank you for that! Appreciate it!

A perfect video. Exactly what I needed. And right to the helpful stuff...

@ShotgunScream

6 жыл бұрын

hob976 thank you so much my friend.

This has been so helpful. Keep up the good work.

@ShotgunScream

6 жыл бұрын

Teon S thank you brotha! Glad you found it helpful.

Incredibly helpful. You just distilled the perfect set of essential skin texture techniques for any skill level to get satisfying immediate results that genuinely look like skin. None of this shortcut noise fill nonsense. Thank you! Subscribed and liked faster than a super fast thing... I don't know, umm.... a hummingbird? No. I didn't float and peck at that subscribe button. Umm, a missile? Nah, I plan to revisit this to watch it about a thousand more times. OH! I KNOW! I hit that subscribe button like the vengeful judgement of an angry elder god! Boosh. Nailed it. Rough in the middle there, but I stuck the landing.

@ShotgunScream

3 жыл бұрын

Lol thanks brotha. Glad it was helpful.

Thank you . I love this

@ShotgunScream

6 жыл бұрын

Glad you enjoyed it!

thanks!!! so easy to understand!

@ShotgunScream

5 жыл бұрын

Gabriella Bonita Sukianto very glad it helped

Thank you so much. Plus I subscribed because you asked so nicely :-)

@ShotgunScream

5 жыл бұрын

Potz Zilla thank you so much! You rock.

great simple tutorial thanks alot!

@ShotgunScream

5 жыл бұрын

Alex Tattoo my pleasure. Thanks for watching.

thank you so much

Amazing vid, can u also make a tutorial on how to make the realistic color of the skin on top of what we learned in this vid.

My hero

Thank you very much sir This is really helpful.

@ShotgunScream

4 жыл бұрын

gaurav kumar my pleasure

Thanks for sharing to us🙏👌

@ShotgunScream

4 жыл бұрын

My pleasure

awesome tutorial, Do You have more tutorials regarding pore regions or wrinkles (age marks ) thanks

Thank you very much. that helped me alot!

@ShotgunScream

4 жыл бұрын

DonF204 thrilled to hear it. Subscribe for more content!

@DonF204

4 жыл бұрын

@@ShotgunScream I have ;-)

@ShotgunScream

4 жыл бұрын

Thank you so much

basic but also an usefull technique, thank you so much!

@ShotgunScream

5 жыл бұрын

gabezno09 my pleasure!

Thanks for sharing Spicer, cheers!

@ShotgunScream

6 жыл бұрын

My pleasure!

Thanks for this nice tutorial! Can you also do one on 'How to Sculpt Hair Details in Zbrush'? I love your way of teaching!

@ShotgunScream

6 жыл бұрын

Thank you so much for the kind words! I will do so soon as I get a decent enough workflow for you all. Thank you for the suggestion!

@ShotgunScream

6 жыл бұрын

So I have completed a few hair styles with success. Will make tutorial soon about the process.

@ShotgunScream

5 жыл бұрын

kzread.info/dash/bejne/lKRrrNhtkbfah5M.html There's the link per your request. Hope you find it helpful.

@TanatomorFozis

5 жыл бұрын

@@ShotgunScream it locked for some reason. thanx for what you do, sharing a knowlidge)

@ShotgunScream

5 жыл бұрын

Brain_Stok unfortunately the client sent me the NDA that the model was based on so had to take it down.

THANKS

@ShotgunScream

3 жыл бұрын

My pleasure.

can u make a tutorial on how to do it fast ,i mean that wrinkle in the last step and also a tutorial on skin hairs ,pls ,thanks for the ultimate tutorial

@ShotgunScream

5 жыл бұрын

There is a Short Hair Brush that comes with a tutorial. The name escapes me at the moment but I would definitely look for that.

Just because you asked so nicely I’ll Sub subscribe.

@ShotgunScream

6 жыл бұрын

Appreciate the love UHS

Thanks for making this short and simple definitely subscribing. Do you have any tips for modeling separate pieces of metal and cloth armor (something that could be taken off or put on)?

@ShotgunScream

5 жыл бұрын

Thanks so much! Really appreciate you taking the time to watch the video and subscribing. Are you speaking of something that you would 3d Print or something you would take off just digitally? I do not have anything like that on my channel. All I can say is reverse engineer the piece and start from the inside working outward and dont be afraid to make pieces over and over again until you get it right. That's what champions do!

@XxUndeadXTacoXx

5 жыл бұрын

@@ShotgunScream Just digitally I could start it in Maya and export it, but since I'm working on learning ZBrush I'm trying to find a good method for doing as much as I can there instead. I've still got some final details to add to the character's skin, but I'm thinking I might try masking bits and pieces, extruding, drinking a shit load of coffee, shaping it all out, punching a hole through the wall when it doesn't work the way I want it to, and trying again.

@ShotgunScream

5 жыл бұрын

Undead Taco I would start with blocking it out with masking and extracting. Then move brush til the forms are the way I like it. Use trim dynamic and then after that sketch is done retopologize with the topology brush and use Zmodeler to recreate it with really clean topology. Hope that helps.

My models will be so much better thank you!

@ShotgunScream

5 жыл бұрын

Mullins Toys my pleasure! Glad it helped.

understand it in quickly, on to the point .. I watched most of them just talking talking bro do you have eye sculpt tutorial

Thanks bro. From 2020

@ShotgunScream

4 жыл бұрын

Pleased to hear it helped you. Skin detail doesnt need to be that complicated. Hopefully, this simplified it for you. Don't forget to subscribe and share the video. It would mean a lot! More streams coming soon!

great tutorial!! thanks

@ShotgunScream

5 жыл бұрын

Thanks for watching!

@Maitraya3D

5 жыл бұрын

@@ShotgunScream i would really appreciate more videos like this..

@ShotgunScream

5 жыл бұрын

Maitraya 3D what subject? I have done hair and skin details.

@Maitraya3D

5 жыл бұрын

@@ShotgunScream I'm absolutely new to zbrush.. learning sculpting and hardsurface modeling.. but struggling in colouring and texturing.. can't figure it out how it works..

@Maitraya3D

5 жыл бұрын

@@ShotgunScream i have made one sculpting.. which was my 1st experience with zbrush.. plz give some feedback.. kzread.info/dash/bejne/om2grah_lKqtZJM.html

thnx so much sir , for this amaizing tutorial... can u plz make a tutorial on how to make this thing with high res alphas??

@ShotgunScream

6 жыл бұрын

Thanks for watching. I am unclear on your question? Do you mean how to create high res alphas or how to use them?

@pranabsen7481

6 жыл бұрын

well sir i meant how to use thm in a proper way...can u plz help me out in this matter?

I love how you reply to every comment unlike other KZreadrs. Also, is there a way to apply noise to textures? I wanted to upload a skin texture into zbrush just to add the realistic noise effect to it and use it for a virtual game

@ShotgunScream

4 жыл бұрын

you can into Surface in your Tool palette, click noise, then edit, at the bottom left of the canvas you will see an Alpha on/off. Click that and now you can use alphas as the basis for your Noise applications. Very glad you are enjoying the channel. Share the video if you would be so kind.

@JassC23

4 жыл бұрын

Spicer McLeroy wait, how am I able to upload a texture just to add noise and save it?

@JassC23

4 жыл бұрын

Basically what I am trying to say.. I uploaded a obj mesh head into zbrush. I was trying to find a way to create skin pores and found that zbrush was the better way to go. I uploaded my skin texture file to apply it to the obj mesh head that I’ve uploaded. I am trying to apply the noise to the skin instead of only on the mesh head 😭 I hope I’m making sense

Thank You, Mr. McLeroy, for that easy clear cut tutorial, I'm really liking the added detail to my shitty model. I should Tag you on Instagram!

@ShotgunScream

5 жыл бұрын

Pablo Pesquera my pleasure and glad you enjoyed the tips! Thanks for subscribing I really appreciate it

@spartan5760

5 жыл бұрын

@@ShotgunScream I'd Like to see your Approach to Hair Simulation. or even do a comparison between Zbrush & Blender

i cannot get any tutorial for polypainting realistic human skin all videos are in timelapse and cannot be followed please make a tutorial on this , if the speed is 1.5x or 2x faster it'll be fine , please ,please ,please

@ShotgunScream

6 жыл бұрын

This one will definitely be coming. More of an overview so that you can take it the rest of the way.

How many division this sphere have? How many poly to get this resolution?

@ShotgunScream

6 жыл бұрын

Hey Bruno, I believe it was subdivided this about 5-6 times.

cool

@ShotgunScream

6 жыл бұрын

Thank you brotha. Glad you enjoyed it!

nice tutorial!! i really apreciate it but i have a doubt how can i put details using alphas but not to add geometry while im on it, can you or someone else who knows can help me with this ?

@ShotgunScream

6 жыл бұрын

viewtiful jose you would use maps. This is for sculpting not for the final output that would either be decimated for 3D printing or a low poly cage with displacement and normal maps.

@josengan1

6 жыл бұрын

thank you very much for your response i will learn a lot about this maps have a great day

@ShotgunScream

6 жыл бұрын

Check out my Renderman Tutorial for an overview of what maps will do.

@josengan1

6 жыл бұрын

thank you ! right now i will see it!! thanks again !

Is there a way to do this in photoshop?? Please answer 😭

@ShotgunScream

4 жыл бұрын

Im sure there is but I only use Photoshop for compositing purposes. Not illustration.