Nice and best way to teach. Initially i thought some gora is making this demo until I heard the very familiar voice in the background saying "choriyan taiz karwa lo, kenchiyan taiz karwa lo, pressure cocker diyan washran pwa lo" 😅😅😅

Thank you for this video! I struggled a little but this is a good idea!

Tape on tip is great idea...

The ferrule is machined flat. Use a blade to get any residual tip and glue off, never sand it.

@ewanthug91

3 жыл бұрын

yup. i never sand it. just use blade to cut off the old glue

@D.P.G

3 жыл бұрын

@@ewanthug91 You may well not have but whoever made this video can be seen sanding the ferrule at the 5 min mark, watch the video. This looks like the first tip change (cue and tip look brand new) but after half a dozen or so the ferrule may start rounding off.

@ewanthug91

3 жыл бұрын

@@D.P.G barry stark does mention about this ferrule thing, he said like u just said.. its machined flat dont mess with it..

Great video thanks for sharing. Which tip shaper are you using I am looking for one like this, if you don't mind sharing?

Great video.Thanks for posting.

Never shape a tip like this. Scrubbing the sandpaper across the tip like this will tare the fibres of the tip. Always do downward strokes when shaping tip

Where did you get this cue from?

where can you get this tip shaper

Sir nice tricks to re tip.which brand tip is it?

Parabéns que marca é essa sola... Parece ser muito boa...

Ye shaper milskta ha ??

Awesome video

I am from Lahore tell me where we buy tip clamp in reasonable price or which one is better plastic or wood

Amazing job

You got blue stains on the ash?

Perfect.

bhai kis jag hy

Great video, do you know where I could get a tool like the one you use to trim the tip down?

@FarhanEjazfpfu

5 жыл бұрын

I make it myself. You can too its easy

@osamaiqbal2598

4 жыл бұрын

How you make this tool bro ? Omg

Nice bro

What is the purpose of the scotch tape ?

I need shaper..how much

Taping the ferrule to the same diameter of the tip your going to fit just so your can centre it perfectly is a waste of time, just get a tip which is bigger than your ferrule and glue it on. Your cutting the excess of anyway so it’s in line with the ferrule and then shape it how you like. It’s irrelevant if the tip is perfectly centred or not. Also sand the tip from the centre outwards - don’t go to and fro across it you’ll just pull the fibres apart

@simonbriggs6332

3 ай бұрын

I commented on this video a while ago saying it was a waste of time taping around the ferrule just to centre the tip……….however knowing this trick really came in handy whilst tipping a friends cue yesterday l. Ferrule was 10.2mm and the Century pro tip only measured 10.3mm - I could never have centred it by hand with soo little margin for error. This method saved me from messing up a £5 tip. Thankyou for your video 👍👍👍

@stena_vlogs

20 күн бұрын

Absolutely spot on comment, I couldn’t agree more!

Thanks you so much ❤️ brother

smart way to glue the tip

@FarhanEjazfpfu

5 жыл бұрын

Zhanhong Liu Thanks

I use gorilla glue adhesive instead of superglue gel. Means youve got to wait 24 hours but i get a much more consistent play compared to super glue gel. Maybe you should give it a try!

what if i don't press the tip?

Omin cue tip. Just like mine

SIR I WANT TO.BUY MY OWN CUE AND I'M BEGINNER FROM PAKISTAN WILL YOU PLEASE TELL ME THE PLACE FROM WHERE I SHOULD GET AND THE PRICE PLEASE

From where did you get this tip clamp (Silver one)

@osamaiqbal2598

4 жыл бұрын

Bro if u got answer please tell me I need tip clamp and tip shaper

@knutnskar6796

4 жыл бұрын

@@osamaiqbal2598 eBay

Can any one tell which cue tip is cheap and better

Have you tried the Bondic uv glue ?

@FarhanEjazfpfu

2 жыл бұрын

I always use bison glue

sui gas da chuly v thk kra lo

LIKE

with a normal snooker cue, the ferrule is flat with the wood of the cue...

What is the 2000 paper and where to get it ?

@shaillybhai007

4 жыл бұрын

It is sand paper

10.07.. hear the sound..👉. pressure cooker theek krwa lo😂😂

Which sand paper is best that can be used in tip shaper, fine or thick sand paper ?

@FarhanEjazfpfu

4 жыл бұрын

220 no

Meri cue per tip laga do gey aap?

where did you get your tip shaper

@FarhanEjazfpfu

5 жыл бұрын

I made it by myself

@shk.ahmadshahzad9924

5 жыл бұрын

cues 2 use plz tell how you made your tip shaper

@kingjay64

5 жыл бұрын

You could make by cutting a pvc pipe in half and pasting sand paper(fine grain) in the inside

@game4alaughman

Жыл бұрын

@@FarhanEjazfpfu the tip shape is crap pal. 😢

It was very, very dangerous the way you removed the tip from the cue. You're supposed to lay the cue flat on a table and then cut the old tip out carefully !!!

Pressure cooker theek karwa lo

You don’t put tape

@johngriffiths5682

4 ай бұрын

Why not?

Because of the person outside, I now know that you're from Pakistan 😂😂😂

@FarhanEjazfpfu

3 жыл бұрын

😂😂😂

@lehrasibalinasir

3 жыл бұрын

Very nice video though! ❤

@FarhanEjazfpfu

3 жыл бұрын

@@lehrasibalinasir Thanks bro 😊❤️

Sui gas de chiulle thk kra lo cue dia tip lawa lo

Pointless centering the tip its bigger than the ferrule...

Put the cue on a flat surface and cut downward other wise expect to have a few stitches. Ffs

@dnbmania

9 ай бұрын

8:24

Not the way to do it over time you'll ruin ur ferrule

y did u waste a perfect tip, could've shown us a tutorial with a worn off or a broken tip instead

@austinmoore1689

4 ай бұрын

Probably didn’t like it so replaced it

with all those accessories i still believe that's not a good replacement. just because it has more height i mean the tip wont be comfortable for shots...