For those who say it's not working - are you working on a Toyota and do you really have 4 & 13 jumpered. I would bet that Toyota owners who don't get satisfaction from this have the wrong pins jumpered. As he said in the video - after you jumper pins - turn on ignition to 1st position - do not start car - several dash lights will blink. The blinking dash lights indicate that 4 & 13 are jumpered . Also - correct number of pumps in x number of secs is important - AND - after you do the pump - REMOVE the jumper wire BEFORE starting the car. Jumpering 4 & 13 is used for many functions on late model Toyota's to include putting transmission into temp. check mode in order to set transmission fluid level on Toyota's that have no dip stick.

I just recently changed my front brake pads and rear shoe brakes on my 08 Prius and this problem came up. The dealership quoted me 200 dollars to run a diagnostic on my car... That was way more than how much I spent on my brake pads and brake shoes! Came upon this video and decided to try it out. It worked like a charm! Thanks for sharing this video!

This totally does work. I have a code reader that does the ABS system , I read the system with my code reader had two abs codes for wheel speed sensor faults, I used the jumper wire as shown in video. Then scanned the car again with the code reader and zero codes found. I would say if you do this on your Toyota and the light comes back you have a fault in the abs system that needs fixing, its not just a false code thrown.

Changed wheel speed sensor and had to reset the abs light. Tried this method and worked. Toyota camry 1998 sedan v6 3.0L. Cleared the light first try. Thanks mate.

Thanks I have a 2004 Toyota Sienna and tried this method and it cleared the ABS light. First I tried removing the battery terminals and left it out for almost an hour and when I came back from lunch I put those terminals back on the ABS does not turn off like you have mentioned. Luckily I found this great video and using your method it works thanks so much!!

awesome. thank you. for those who have issues. use a wire or paper clip and insert into the obd. top row- 4th from the left. bottom row- 5th from the left. turn key to on , but not start. pump the brake fast 8 times, remove wire and start the car.

@chasingadream1572

5 жыл бұрын

Works on 2006 Scion tc Great Video

@Izabella_playz

4 жыл бұрын

Best explanation than the video. Thanks...

@yeyasoer7506

3 жыл бұрын

Ññpñ⁰ñ

@valaus90

2 жыл бұрын

Better explanation than the dam video

@siddharthpareek6742

2 жыл бұрын

Thank you so much!!

Worked on my sister's 06 Prius and I can't thank you enough for that!

THANX A LOT! prius III bugged after brake job, Toyota retailer wanted to charge me 4000€ to replace the whole abs system after a few internet research, i did the reset myself and it costed me 0€ THANK YOU !

@mustie1

5 жыл бұрын

nice

Thanks my friend, your advice has helped me a ton on my 05 Tundra, and this little tid bit helped as well, just about to do the steering rack, your video on that is excellent. Thanks again from one fellow Mustang, Tundra man to another....

Wow! So glad this is here after 10 years. I had the same issue yesterday after replacing the axles and front brakes on my "10 Corolla. Really good video. Clear, concise and no eastern European accent to decifer. Really appreciate it!

You sir are God sent. Thank you so much for sharing this. It solved my 06 lexus gs450h abs error. I've replaced the front pads and rotors and when I started the car it triggered a code. Tried all the methods presented online, but this worked prefect the first time I've tried. Again thank you. God bless!

Great Tip, It saved me a lot of money, avoiding to go to the dealer & allow them to rip me off.. (It worked for my Camry Hybrid 2007) Thanks a lot !!

Thank You, Thank you, Thank you!. I replaced the rear brake pads and the ABS/VCS warnings came on. I spent more time trying to get rid of the false warnings than I spent replacing the pads. I'm so glad I found your video. Worked like a charm. Cheers.

Thx. U saveed me some money. :) It worked perfectly fine. On camry hybrid 2009. No more abs light

What other dude has been saying didn’t work until I found this. This one worked on my first trial. Thank you.

Thank you! Did a whole carrier assembly in the rear of an 09 highlander hybrid.. it set off all my lights when I was done. This fixed it, thank you!

Thank you . Your guide works on my 1996 Lexus LS 400. Appreciate your time for us.

This help me alot. Almost 3 months may abs and handbrake is on. Toyota vios 2009. And i try this tutorial its work. Thank you so much.❤

Mustie 1, You are such a great man....it works on my toyota vios 2012...Thank you so much........

Confirmed worked for a 2007 Toyota Tacoma (4.0L V6) with ABS light on.

Thanks a lot. This trick works on my 2008 Camry! After checking the abs sensor resistance, the abs light turned on. Disconnect the negative power didn't turn off the light.

Worked amazing for me on a 2001 Toyota Avensis, thanks ever so much for the tip.

I own a 2006 Toyota Highlander Hybrid Limited, replaced the front left CV axle, wheel bearing, caliper and pads on all wheels. When the repairs were completed the VSC, ABS, and Parking brake lights were lit up. The ABS was not working; I tried to bleed the brakes thinking this was the problem, but to no success. Last resort I tried the above and it worked. Thanks, all codes cleared and the vehicle runs and drives great.

@mustie1

8 жыл бұрын

glad l was able to help.

Thanks....worked on my 2011 Yaris after replacing both hub assemblies

Worked on my ‘06 Prius. Thank you so much!

Very helpful sir, this worked on my Toyota Camry 2002, I had an broken wiring harness rear left on ABS sensor. I fixed it but disconnecting battery doesn't help, so I tried this and it works well. So much thanks

Thanks dude. It worked, that damn abs light is gone finally. I managed to change the broken sensor. The abs light remained.. until yesterday.

Problem fixed on 2004 Toyota Prius Brake-ABS-VSC alarm with this video. THANK YOU!

Lexus is250 2008.Worked perfectly. Air bag off sign is gone. Just going to need to really get under the driver side dash to stick a paper clip in the tiny holes. Thanks!

This just worked on a 2016 Sequoia. Thank You!!

Worked on my 2010 FJ Cruiser TT 6MT after a speed sensor replacement. Thanks!

Thanks for sharing🙏🏾. Short&sweet. It works on my xle camry 01. The abs light keep flashing 2_1 code which is the rightfront sensor or the abs module. The wheel speed sensor was fine. I replaced the ABS pump control cos the rightfront wheel not function. Running smooth now. Thanks again👍🏽

2009 Prius worked like a charm.....Thanks!

Worked on a 2008 Rav4 Thank you champ

Worked on my Yaris 2000, thanks for sharing!

god bless you. I just replaced a brake line and hose and bled it only to find out that the braking system was locking out that brake. Since ive had this happen before when i replaced my rear brake wheel cylinders i was expecting this and thought i might have to take it to a shop. good thing you made this video and probably saved whatever ridiculous price they would want for this 2 minute procedure. (this was on a 2007 prius if anyone wondering)

@surfside75

4 ай бұрын

Can not get this to work for my 05 sienna.. any idea?

@jacksoncarter6352

4 ай бұрын

@@surfside75 I'd you're certain youre experiencing the same issue where the electronics are locking out a specific brake I would try looking around the Internet some more for a similar procedure. If that doesn't work a mechanic should be able to do it, hopefully they'll show you how to fix it if you ask, if it doesn't require some fancy scanner.

This trick works. I have same Corolla 2010. I am very grateful. Keep it up.

had the same error on a 2009 Toyota Camry Hybrid after changing the brake pads. I followed your video which clear the codes and reactivated the traction control & abs. Thank you.

@mustie1

7 жыл бұрын

glad l could help

@rojasr2

7 жыл бұрын

Jope N1A the abs light will reset on its own after driving the vehicle if the problem.has been fixed .... no need for any of this ... the vsc and check engine will remain on if there is a fault code

@marcellott584

6 жыл бұрын

hay mr . overachiever ! if you listened to the video this is not meant for any of that nor does he state it !

@marcellott584

6 жыл бұрын

Wanted to ask you a question , related to coolramone statement it does look like a paper clip , You state a jumper wire could please tell where and what excatly i need and how to get this ? please autozone was no help =(

Yeahhh!! Clip in the Pin 4 and pin 13. Turn on ignition, press brake pedal 8 times in a 5 seconds, lights go to blink, wait 30 seconds, turn off the car, pull off the clip, turn on the car and the lights are off. Toyota prius 2010. Thank you!!!

Worked on my Lexus is350 after I fix the wheel speed sensor harness thanks man

Damaged an ABS sensor changing rear wheel bearings on a 2007 Rav4. 4wheel, ABS, Brake, traction lights all on after R&R. This worked perfectly resetting all systems and saving a minimum 100 bucks for a dealership visit. Thank you

Worked !!!! With paper clips. Thank you. Toyota asked 180 dollars for this

Worked for the vsc trac, vsc off, and abs light on my 2003 4Runner!

Thanks for this video, it works on my 2009 Toyota vios

Great video! Worked on my 2000 mod corolla 1,4l

it work to reset the traction control light, i replace the rack and pinion, your instructions and a paper clip same $200.00 for dealer service fee THANK YOU !!!!!!!

@calebbundick5511

5 жыл бұрын

Ernesto Ruesta where your games going crazy when u drove the car?

Thanks alot for this great video ! It works on my dad Toyota Vios 2008 !

Oh wow, actually worked on my Yaris XP90 as well!!! Thank you man

Wow what a unique procedure to reset Toyota abs light, very useful information... :)

This is a great trick to remember! I recently replaced some sections of brake line on a 2006 Highlander Hybrid, not realizing that the hybrid brake system was so different. After bleeding the system the traditional way, the ABS / Brake / 'Check VSC' / Traction Control lights were all on and wouldn't reset with a simple battery disconnect. This reset the entire VSC system. All the warning lights went out and everything is working perfectly now. Thank you! :-)

Thank you so much! I was able to reset it on my 2012 Toyota Corolla.

your video really helped me and saved me alot of money ,thank you so much:)

Thanks a lot Mustie 1.. I have tried it out on my Corolla x assista 2006. It worked really fantastic Thanks once again

This ABS reset trick worked on 2002 ford ranger after replacing the rear sensor! Thx.

Worked great on a 2008 Toyota Tacoma. Thank you

The ground the pin deal. I retrieve codes on OBD1's with a paper clip. I never knew something so new could FLASH out the code. Cool stuff

Thanks a lot, this worked on my 2007 Toyota Camry hybrid. I also had the ABS, VSC system sign on after replacing the front axle, axle seal and tie rob, but this using method reset the ABS and other signs on my car.

Thanks Man!!!.it worked on Toyota Corolla Fielder 1.8l 2010 after replacing ABS sensors. Kenya, April 2024.

Thanks so much. It worked for my Corolla 2010

Thank you worked perfect on 05 hybrid prius

It worked perfectly. Great job.

It does work for my 2010 camry hybrid. Thanks Mate

Thank you for help me i did it on Toyota Camry 2010 and it works ... thanx

Worked on 2005 toyota vitz. Thank you so much!

Thank you! Worked for my innova 2009

Funciona perfectamente bien en mi prius del 2005 muchas gracias por tu ayuda y por ahorrarme el dinero de ir a la concesionaria saludos desde Panamá

@hackstarsv

7 жыл бұрын

Hector Tello y debes desconectar batería al poner el clip o no?

thanks very helpful light really turn off thanks again

it works on toyota corolla 2013 great video!!!

@miguelolivares3831

5 жыл бұрын

Is it's work on toyota corolla 2013 buddy ?

2004 Toyota Tacoma. Abs code cleared. Thank you.

its work with my landcrouser prado 2009 . thanks man

tryed on my 11 taco worked more than well thanks

This way was fancy ... 👏👏👏 love you as brother. It worked ✅

Good tip, thanks for sharing with us. BTW, have you ever changed bulbs in a PT Cruiser dash panel? I have one or two out in my "new" 2001 Cruiser. I haven't even tried to get in there yet, just wondered if you had any tips? Thanks

Thanks! This worked on my 2004 Toyota Allion.

Godbless you worked on my 2009 corolla

Had the same problem because I had to bleed the brakes on a 2004 Toyota Prius and it now works fine

Thank you this video has very helped me

Thanks. It worked. God bless you my friend

Just did it, It Works! Thank you!!!!!!!!!

Nice!!....short and simple..a 9 star video

Thanks, I was working wheels and ABS/ VSC and Brake lights came and no front brakes. I tried the jumper from pin 4 to 13 and did the reset (pumped brake pedal 8X and it corrected my problem.

@roncolesr1294

9 жыл бұрын

Ronsr super tech also this is a 2008 Prius

Worked on Hilux 2008... Thanks!!!

Just did this on my 2008 FJ, worked perfectly, THANK YOU!

I just want to thank you my friend for such help. Cooooodooos

It worked great on 06 Tacoma thanks

WORKED AMAZING ON MY 2014 TUNDRA

Worked on my Scion i just changed the ABS wire and now the light is off. Thank You!!

Thanks so much,watching from Malawi

I have Toyota Yaris 2012, put the pin in 5th one from the right on both rows, worked first time for me, no need to pump brakes just let the lights flash for about 5 secs

Good video. It help me to reset the fault codes on my Toyota Yaris -06.

@DopeKidd666

2 жыл бұрын

Really? How hard do I press down?

Thanks a lot it definitely helped me ,

thanks for video........... couldn't even find this info on google

Thank you !!! You solved my problem- great step by step :-)

@mustie1

8 жыл бұрын

+Gina L glad l could help

Thanks, worked on Toyota Alphard.

Thank you! It worked on my 2010 Toyota Corolla S

@mdabdullah-gu1dh

5 жыл бұрын

hi

Worked for my 2013 Corolla... Thanks so much!

Saved a lots of money, Thanks

you are a life saver tyvm for the knowledge ,where you get that book?

Thanks mate! Works like a magic 😮😮😮

thanks buddy, this worked for my 2000 mod corolla e11

@austincarroll3862

8 жыл бұрын

Good to know I have a 2001 with the airbag light on has yours stayed off or did you find a problem with say the clock spring ( connection in the steering wheel) or the micro switch in the seat belt?