How to replace transmission cooler lines on a Ford 6.7 powerstroke
How to replace transmission cooler lines on a Ford 6.7 powerstroke
Жүктеу.....
Пікірлер: 13
@timothyzimmerman747 Жыл бұрын
The line that is shorter is fairly easy to get in and out, the longer line however, takes some skill and maneuvering, you have to get the back end wiggled out to the right side of the truck, once the rubber hose part of the line is between the engine and the frame you have to slide the whole thing over to the drivers side, then for the last part you have to go diagonal from the driver's side in the front to the passenger side in the rear under the oil filter housing and slide it out that way. It all comes out fine if you are skilled at that kind of puzzle 😊
@jaspup4 ай бұрын
Awesome camera work dude really I'm going to puke
@piririn210 ай бұрын
Do you have the part numbers for the lines
@shimmy1211565 ай бұрын
Just a suggestion for anyone...take the five bolts out the the oil filter housing and take it off...the lines slide right in
@shimmy121156
5 ай бұрын
Ask me how i know
@RC-fc6fo
Ай бұрын
Both without separating? How do you know
@Tri_Crew9 ай бұрын
Did you use new o rings on the transmission side because I used my old ones and it seems loose
@timothyzimmerman747
9 ай бұрын
I got the lines from Ford, I can't remember now if they came with new orings or not . If they don't leak it should be fine.
@benpearce6288 ай бұрын
Did you put them back in from the rear?
@timothyzimmerman747
8 ай бұрын
Yes you have to put them back in from the rear . It takes a lot of patience to get them wiggled in 😢
@codynicklow817310 ай бұрын
Why did you have to take the oil filter off
@timothyzimmerman747
9 ай бұрын
Because to get the longer line out takes some fancy maneuvers and the oil filter got in the way of that
Пікірлер: 13
The line that is shorter is fairly easy to get in and out, the longer line however, takes some skill and maneuvering, you have to get the back end wiggled out to the right side of the truck, once the rubber hose part of the line is between the engine and the frame you have to slide the whole thing over to the drivers side, then for the last part you have to go diagonal from the driver's side in the front to the passenger side in the rear under the oil filter housing and slide it out that way. It all comes out fine if you are skilled at that kind of puzzle 😊
Awesome camera work dude really I'm going to puke
Do you have the part numbers for the lines
Just a suggestion for anyone...take the five bolts out the the oil filter housing and take it off...the lines slide right in
@shimmy121156
5 ай бұрын
Ask me how i know
@RC-fc6fo
Ай бұрын
Both without separating? How do you know
Did you use new o rings on the transmission side because I used my old ones and it seems loose
@timothyzimmerman747
9 ай бұрын
I got the lines from Ford, I can't remember now if they came with new orings or not . If they don't leak it should be fine.
Did you put them back in from the rear?
@timothyzimmerman747
8 ай бұрын
Yes you have to put them back in from the rear . It takes a lot of patience to get them wiggled in 😢
Why did you have to take the oil filter off
@timothyzimmerman747
9 ай бұрын
Because to get the longer line out takes some fancy maneuvers and the oil filter got in the way of that