How to replace the timing belt and the water pump Golf mk7 1.6 or 2.0 TDI 🚗
BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Coolant fluid : bit.ly/Coolanten
- Timing belt kit : maclede12.co/Timing-belt-kitk...
- Damper pulley : maclede12.co/Damper-pulleybol...
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Timing belt and the water pump on a Volkswagen Golf mk7 1.6 or 2.0 TDI.
Discover the world of UseTool EN
Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool ES to repair your Golf mk7 : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- Pulley blocking spanner : maclede12.co/pulleywrenchOM36...
- Reversible plier for clamps : maclede12.co/clampsplierOM9397en
- Timing tools : maclede12.co/timingtoolsen
- Torx T27 socket
- 13mm spanner
- 16mm spanner
- 17mm spanner
- 18mm spanner
- Socket wrench
- Flat head screwdriver
- Wheel lug wrench
- Torque wrench : maclede12.co/torquewrenchCLAS..., maclede12.co/torquewrenchCLAS..., maclede12.co/torquewrenchCLAS...
- Small flat head screwdriver
- Torx T25 screwdriver
- 10mm socket
- 13mm socket
- 15mm socket
- 16mm socket
- 18mm socket
- 24mm socket
- Adjustable pliers
- Lineman's pliers
- Extender
- Liquid collector
- Correction fluid
- Iron bar
- Impact wrench
- 6mm Allen key
- M10 Triple square socket
- M12 Triple square socket
- Magnet
- Plug
🔝💪Safely lift your Golf mk7 with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- Hydraulic jack
- Axle stand
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
- "Before carrying out this operation, we recommend watching the video "10 things to know when changing a timing belt" as well as the video "How to empty and bleed the coolant fluid circuit", since you will have to carry out both of these operations to avoid breaking the engine.
- Never ever turn the engine in an anti-clockwise direction.
- You will need to remove the Damper pulley. You must not use a socket wrench to unscrew it. You could lose its setting, or bend the pin in the engine.
Usetool's infos
For this operation, you have to remove the accessory belt and tensioner pulley.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : • Comment (BIEN) souleve...
- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : • ASTUCE : Pneu crevé ? ...
- [ USETOOL'S TIPS & TRICKS ] DIY: Making a liquids collector : • ASTUCE : Fabriquer un ...
- 💁♂️💡 10 things to know when we change our timing belt. 💡💁♂️ : • 💁♂️💡 10 things to kno...
- How to replace the car battery Golf mk7 1.6 TDI 🔋 : • How to replace the car...
- How to bleed the coolant Golf mk7 1.6 or 2.0 TDI 🚗 :
- How to replace the accessory belt Golf mk7 1.6 or 2.0 TDI 🚗 : • How to replace the acc...
- [ USETOOL'S TIPS & TRICKS ] How to (PROPERLY) use a torque wrench? 🔧 : • How to (PROPERLY) use ...
Space Race by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Terms and conditions of the offer : www.mister-auto.co.uk/operati...
Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.
0:00 Intro
0:15 Remove the timing belt
13:43 Remove the water pump
15:24 Install the new water pump
16:58 Install the new timing belt
30:10 Tips before starting your car
Пікірлер: 33
BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
Just about to have this done to my car... watched it so I could sympathise knowingly with the poor schmuck who I am getting to do it! Wish I had the skills to do it myself. Great video, thanks!
Very professional detailed presentation! Great job! Felicitation 😊
Im going to do my timing belt next week, so this video helped me a lot
@UseTool_EN
11 ай бұрын
Good luck! This is a tricky one!
Removing and the installing the plastic cam cover is a probably the hardest thing in this job. Thanks VAG for the great design
@johnblanning2500
2 ай бұрын
iss there a knack to it?
@slengoslengaw8510
2 ай бұрын
@@johnblanning2500 patience.. nothing other than trying to wiggle it out without breaking the plastic cover. Follow the steps about the heat shield.
@chrispinsoza8530
2 ай бұрын
Especially removing injectors
The bottom plastic sequence was showed after the damper pulley was installed :D
Can someone tell me why does he slacking off the cam and fuel pump pulley
A question. The water pump for Vw golf 1.6 17 plate is it switchable or non-switchable
For people doing this on the diesels, not required on petrol models you probably want to open the thermostat and you won’t be able to do that without ODIS, if you don’t you have a good chance to cook the head. You don’t have to but you might want to check the coolant fill quality by pressuring the reservoir to 1.5bar after filling it abit above the plastic line (30mm up) mark the spot, if it drops below 30mm you may have a problem.
Thanks!
@UseTool_EN
Ай бұрын
Hi @TomoReso ! We're glad we could help you out. Hope the operation went well 👌
@TomoReso
Ай бұрын
@@UseTool_EN It did, there is a small mistake in the video tho, when putting all back together, first we put this lower timing cover plastic along with engine carrier, then the crankshaft accessory pulley, not the other way around. Costed me 5 minutes, but no biggie! Video is great otherwise, very well covered. Thank you again!
On Skoda Fabia 1.6hdi 2012 i service book say intervall 198 000 km and no time limit, very strange
After your replace when you need to replace again 60.000 km 80 or 120 or 150.000km i have a GATES - Ref: KP15678XS-1 set
Is anyone knows when or after how many km the distributieriem should be replacing? The total km is 130,000
@UseTool_EN
Ай бұрын
Hi @thebronzedadonis ! This is why we make these videos! 🔥
The waterpump 10 minuut or 10 times in collant?
@UseTool_EN
4 ай бұрын
10 times will be enough. 😄
How many km must change on a golf 7 ? 1.6 tdi 2014
@guitarFAIL
8 күн бұрын
either 10 years or 210.000km. if you haven't changed you should do it ASAP! cheers
There is no link to "How to bleed the coolant Golf mk7 1.6 or 2.0 TDI" video in the description. Was this deleted for some reason?
@arkadius87radom
5 ай бұрын
Did you found it m8?
@JurLog
4 ай бұрын
No need for vacuum, it will bleed the normal way. Just fill till max mark, start your engine and see how level drops, when it drops, fill it. Go for a 3 minute drive with coolant bottle with you, stop and check again, fill and drive again 3 minutes, stop and fill again, do this till it stops dropping. I did 3 times and next day 1 more. Thats all
Without a dealer doing this work, it's a nightmare as a DIY for a common person
@Amigow0w
11 ай бұрын
This is something that you shouldn't do if you are not 100% sure that you can do it ! And even if you know what you doing, you need to make sure you've got the right tools 👌😎
@JurLog
4 ай бұрын
Did it two weeks ago on a road side, car runs great and I saved million of pounds. And Im not professional mechanic.
No way I'm doing this myself.
@UseTool_EN
Ай бұрын
I can understand ... 😅
@guitarFAIL
13 күн бұрын
🤣🤣🤣 so true bro just like me