Thank you so much for the information! I appreciate it

Please show how to change the back wheel inner tube ?

@sustainableslumber552

3 ай бұрын

remove the 4 bolts and take out the tube then use a gas station pump to fill it up

I've got another scenario for you. One of the side nuts won't budge, so you can only unscrew one of them. There is no way to unscrew the other nut while the axle is loose and spinning and you just can't lock it in place. Then you f^&king HAMMER the wheel out of its slot.

@maksym3d

Жыл бұрын

If you got one nut off - there should be nothing holding the other one. You can simply slide the axle out of the hub with the other nut still attached.

@art2cute

Жыл бұрын

Thanks. I was getting frustrated.. lol

Thanks man

Were did you get the Rear Wheel from what website?

I need to get a razor E prime 3 rear wheel/motor I'm in New Zealand and cant get one here. All the suppliers can only give me a razor Prime wheel which only has the yellow plug and not the black plug as well. Please can you help me.

Do they have Rear Wheel for E200

I accidentally sprayed WD 40 where it says don’t grease and my tire went flat and won’t hold air. Do I need a whole new tire system

@sustainableslumber552

3 ай бұрын

retard

Poor instructions this is not a detailed one, can someone give a link on how to do the whole tire assembly, thanks!

Hey I did all this... besides losing the screws for my chain guard.. thank you boyfriend... lol. .. I went to turn on my scooter and see if it would work!!.. the back wheel won't move now!! I am going to charge my scooter but my chain is now rusty from being out of commission for over a year :( so maybe I just need to oil my chain?? But yeah the back wheel just locks up :(

@razorworldwide

Жыл бұрын

Are you still needing help? Let us know!

And here is the second part we are here for - how to change the inner tube! kzread.info/dash/bejne/o5WKmpSiaK3WdLA.html

What about the front wheel

@sustainableslumber552

3 ай бұрын

its easy as fuk foo

dude....would be helpful if it showed how to remove tube and tire from the rim rather then only showing how to replace the the whole wheel and drive train

You were much more helpful when you played Kenneth on 30 Rock.

why cant I find a single video of what I need to know..... rubber washer thingy...

@MrStyle2

4 жыл бұрын

You mean the one that goes inside the brake?

@davidgoodrich1258

3 жыл бұрын

@@MrStyle2 I think you just saved me a headache. The bigger “rubber washer thingy” goes inside the brake? Between the metal drum and black piece?

@MrStyle2

3 жыл бұрын

@@davidgoodrich1258 it’s been a year since I took it apart so I don’t remember

@davidgoodrich1258

3 жыл бұрын

@@MrStyle2 dang. Oh well. My biggest issue has been getting all the washers and spacers in proper location. Bought a used one for my boy for Christmas and had to replace rear inner tube and tire. Everything back together but the wheel doesn’t spin and I have a spacer left. I’ll figure it out

This is only useful if you want to pull your existing rear wheel and then put it back into its original position. If you actually needed to install a new wheel, this tutorial leaves out the entire axel removal and washer placement. In other words, not very helpful.

Garbage video....not one second on how to remove the tire from the rim! Who has a whole new wheel assembly to swap out?

This video was deceptively shot and produced with not much helpful info.