How to Replace the Blower Motor in a Nissan Xterra
Автокөліктер мен көлік құралдары
This video demonstrates the removal of the blower motor in a Nissan Xterra (second generation). If you need a blower motor for the Xterra you can follow the link below.
amzn.to/2jBcG09
Check out the Official RTCG website! rtcg.tv
Support the channel and get a cool t-shirt: represent.com/store/ry-the-ca...
***As an Amazon Associate I earn from qualifying purchases by use of affiliate links.
#howto #diy #auto
Пікірлер: 136
Thank you so much for posting this video! It was so very helpful! Several months ago my air conditioner/ heater fan started making an unsettling noise whenever I turned it on. The higher I turned it on the more unsettling the noise became. My gut was mostly telling me and hopeful that something possibly got in the fan from the overflow from the glove compartment (my daughter and her 30 lip gloss and chapsticks, etc...). The other thing of course, was also to check the air filter and air filter compartment.Which I will be commenting on that video of yours which was also a huge help and blessing. So because of your video for the first time ever I removed my fan motor and sure enough, There was a chapstick inside!! I removed the chapstick, re attached the fan motor and turned on the AC/heater and the sound was completely gone! Mystery solved! I saved money by doing it myself. Now we can run the A/C next weekend while visiting AZ. My daughter learned some lessons here and I feel like a million bucks for accomplishing the job. #girlpower 😊
Thank you for being direct and simplifying everything that was done here!
@Rythecarguy
Жыл бұрын
My pleasure, thanks for watching! 💪🏻
I just bought a 2008 Nissan Xterra and I am so glad I found your channel. Literally every issue my Xterra came with you cover in your videos.
@axidhaus
2 ай бұрын
Welcome to the Xterra community
Excellent video Man! I have a Nissan Xterra 2002. I had a "rumbling" sound coming from behind my glove compartment when I put my heater on. And, there was very little force in the fan. I first checked the cabin filter for obstructions. I had to remove the glove compartment to do this. It was full of straw which I cleaned out. Next, I took out the blower motor just as you showed. Sure enough, it was jam packed with straw, including the compartment that the blower is attached to. The fan could not spin! It is obvious to me that mice had been working on building a nest. I was away on vacation and my vehicle sat for 2 weeks. I cleaned out the blower motor and the area behind it. After cleaning out everything, I reassembled the blower motor and put back the glove compartment back in place. Everything works perfectly! Thanks for the video, and for saving me money!
great video. You explained the steps very well.
No filler, no fluff (unlike my Xterra HVAC right now) just the content I needed. Awesome video as always. Thanks!!
@Rythecarguy
2 жыл бұрын
haha thank you. I hope you get yours all cleaned up.
@thomasvlahoff3561
4 ай бұрын
The 3 blower motor bolts I had to painfully get out with small vice grips, no socket worked on the head of the bolt?
Thanks for the video! Pulled my cabin air filters out today and ended up dropping acorns on the motor. Watched another video where the guy ripped the whole glove box out and thought there’s GOT to be a better way. This was perfect. Cleaned and oiled the fan while we had it out and now it runs smooth and quiet.
@stevenp3176
6 жыл бұрын
SamZzz glad I’m not the only one. Just did the same thing today.
Hey man that was awesome, step by step, I need to replace mine so this is great!
Yaaasssssss! This was an easy fix to a super annoying problem. Fan was super noisy. Was helped by replacing filters, but found a bunch of little pine needles and twigs when I pulled the motor out. It now purrs like a baby kitten. Thank you Ry!
thank you - i will have to try this next to see if anything fell inside - you have a new subscriber!
thanks dude. my wifes 2008 is not working at all. now I got the rundown. I got work to do.
Well done, you are answering some of my questions. You just made a new subscriber. Thanks again. Your videos are very well done, and the images crisp and clear.
Excellent video
Thank you!! I watched your video and was able to replace mine.
Hey I have a question. My 2013 Xterra ac blower changes speeds on all settings. For example it will blow at its proper speed for whatever setting it’s on however every couple of seconds it will slow down for a bit then speed back up. Do you think it would be the resistor?
Thanks for these videos. I almost traded in my xterra. I’m going to try this myself since the mechanics where I live are either unavailable or unprofessional but I’ve been able to follow along in the past. Thanks for that part link as well. Wish me luck !! In a week I’ll let you know how it goes
Thanks for the video! I was getting odd noises out of my 2005 Xterra blower. I followed your instructions and replaced the motor. Problem fixed! Appreciate the vid.
@Rythecarguy
Ай бұрын
You're welcome! Thanks for watching!
Thanks! Great money saving instructions
Fantastic video, short and straight to the point.
@Rythecarguy
5 жыл бұрын
Thanks Man. Sub for more like it!
Thanks a lot for your instruction video, Ry. I had a fan noise that turned out being a piece of a drinking straw. Crazy! I have no idea how that got there. Also, my Xterra had a insulation cover over the fan motor. I had to remove some stubborn clips on the screws to get that out first. I wonder if some models had that, while others didn't.
It worked, Ry. There's no way I would have even considered changing the motor if it wasn't for your video! Also, the motor you recommended on Amazon works great!
@Rythecarguy
2 жыл бұрын
That's great to hear! So glad the video helped. 🤘🏻👍🏻
Removed my Air and heater blower fan in my 2012 Nissan Xterra do to some buzzing noise. Did not find anything in the fan bucket section to create any noise could it be the internal bits to the motor itself or am I missing something? great video!
Awesome video!! Just changed mine and I really appreciate you saving me cash!!
@Rythecarguy
4 жыл бұрын
Of course! Good work knocking it out yourself. 👍🏻💪🏻
Hey Rye, have a video on how to fix the clicking noise from the internal air mix valve gear directly above the cabin air filters? I've only been able to find temporary patches like zip ties & clothes pins to hold the valve/door open to keep it from clicking. Would like to fix it not rig it
Thanks Ryan for your video. My blower and AC quit on number one, but blower works on 2,3,4 with AC not working. Thanks for showing how easy it is to replace the resistor and fix my AC system since summer is coming here in Florida
@Rythecarguy
3 жыл бұрын
Glad to hear it went well. Where abouts are you in FL? Orlando area here.
Man thanks for this video!!! I also used your led floor light installation video to on my X
@Rythecarguy
7 жыл бұрын
+Jeff Jones Of course! That's actually one of my favorite projects I've done. I really think that it modernizes the truck.
cool man you are the best
Thanks!
This was the first thing I replaced on my 2008X. Nice video, wish I had it when I replaced mine. 😀
@Rythecarguy
3 жыл бұрын
Nice 👍
Thanks, is this the same for a first gen?
Thx. Finished this today. Much obliged.
@Rythecarguy
Жыл бұрын
👍
Mine blows cold air unless we’re driving down the road. I need heat! We live in Michigan’s Upper Peninsula and winter is almost here. We brought it to the dealer and they said they couldn’t find anything wrong with it and said maybe it was air in the lines??? They flushed and bled the system and charged me $250 and it’s still not working. Any thoughts??
Thanks for the video. So the blower motor in my 2010 Frontier has been making an obnoxious ticking noise since a few weeks ago. I replaced my cabin filters and pulled the blower motor out for inspection and it was clean as a whistle. Any idea why it would be making that noise? Thanks for your insight!
@Rythecarguy
6 жыл бұрын
It could be a bearing in the motor itself. :/ Had to tell without hearing it.
Thanks for the info.👍
@Rythecarguy
7 жыл бұрын
+J.R Rios you got it! :)
Thank you man everything worked
@Rythecarguy
3 жыл бұрын
You got it!
Hi, I recently changed my blower resistor coz fan and ac only was blowing at high speed. So it worked but after 2 days my resistor went bad again. What could have caused it? Thanks.
As always thank you for your helpful videos. And for the benefit of those going for this job, since it's not mentioned on the video. The size of the screws holding the blower is 5.0 mm.
@Rythecarguy
2 жыл бұрын
🤘🏻💪🏻
@jeremywilliams9039
Жыл бұрын
Mine does not have normal bolt heads. Some type of clip that is screwed onto the bolts. Ideas?
clear nice job!
@Rythecarguy
3 жыл бұрын
Thank you! Cheers!
I've been having trouble with my ac for a month now. I've already checked the fuses and have replaced the resistor but I'm still not getting any air flow. The compressor kicks on but the blower motor doesn't turn, could this be a relay issue or the blower itself? Awesome videos by the way, I've used both this one and the cabin filter one!
@Rythecarguy
7 жыл бұрын
+Michael McCall first off thanks! It sounds like you might be low on refrigerant. Have you tried recharging it? If you recharge it and it works then you know you ware looking for a leak somewhere
thanks so much...you just saved me about $400
This is great. My Nissan X-trail is not so easy. I got a quote of $1300+ labour to get my blower replaced. From my mechanic who charges WAY less than the Nissan dealership. My fan only works if I have my block heater plugged in for hours before or overnight. If I go out for an errand and get back in my X-trail the fan no longer works. It's aggravating when you live in Canada and there are -55 °Celsius (-67°F) wind chill days and I cannot afford this bill. Only replacing the motor and resistor from removing them from the entire assembly is affordable at $95 for both parts is feasible. I know you said not to remove the parts but in this 2005 vehicle I need an affordable option. What do you suggest?
Great video man, was super easy to replace the motor with your help. Unfortunately it didn't solve my problem. I can feel slight warm air at the vents with heater on, but no blowing. Not sure what to do now. Obviously the resister comes to mind, but people have said if like one setting functions only, then it's probably resister. All 4 of my settings don't perform, so I don't know.
@Rythecarguy
2 жыл бұрын
That's true, its DEFINATLY the resistor when only 1 or 2 are dead on the dial. It COULD be the resistor when none work. The other option is that your switch is dead. I would do resistor next.
Hello I need your help about my Nissan Xterra 2009 AC blower always working when turning on the engine and without turning on Ac
@lecyalphamaids9134
3 жыл бұрын
AHMED.....did you ever get an answer to that, i sort of have the same problem, changed resister, and still blower motor now dont work, bought a new blower motor also for my 2009Xterra/$91 from NAPA autoparts store down here in south fla.,, so i hope, and someone told me that was it, if it aint, then I havent a clue then what it could be! anyone ever change blower/motor and resistor, and still have blower/motor problems??? ANYONE???
Hey! You have been a great help with our 2001 Xterra, but....the 2001 is NOTHING like the X that you are demonstrating with! Lol there are no cabin filter in a 2001 Xterra. We took that whole front compartment apart and no cabin filters. The blower has just gone out, so were going back in and hopefully it's close enough that we can figure it out this time. Any advice on what to do about cabin filters on a 2001 Xterra? I heard they need to be cut and added. Wish us luck on the blower!!
@Rythecarguy
5 жыл бұрын
Not sure on the filter but best of luck on the blower. I believe in you!
god Bless you sir!!!! Im having issues.. lol My shrink doesnt have answers like you!!!
@Rythecarguy
6 жыл бұрын
+ericbofcarsonc glad to be of help!! 😁
Just Thanks save me a lot of $$$ your the best!
@Rythecarguy
7 жыл бұрын
Thats great! I am glad to have helped. :D
Outstanding video..I also have a clicking/rubbing sound. This should do the trick. Thanks
@Rythecarguy
4 жыл бұрын
You got it! 👍🏻
Great video, Info i needed to do mine.
@Rythecarguy
7 жыл бұрын
+Chen Keo sweet, glad ya like it!
@rpdfix6056
7 жыл бұрын
Ry the car guy hey buddy can you make a video of how to fix your lose steering wheel on the xterra (2nd generation)?
Hi Ry. I have a different issue with my 05 Xterra my blower does not turn off with the keys out of the ignition. I have researched this a lot and found nothing on the exact topic. Dont think its the resistor as the blower speeds work fine. Would this be the control module causing the issue? Thanks for your help in advance. Kay
@Rythecarguy
7 жыл бұрын
+Kay Fiehn does it turn off if you turn off he dial or is it literally always running?
@fliehn
7 жыл бұрын
+Ry the car guy it turns off when you turn the dial and works on all 1-4. It just doesn't turn off when the truck is turned off and the key is out of the ignition. Help please!
I was thinking of getting a low miles 2015 xterra. Do you think your truck is reliable?
@Rythecarguy
7 жыл бұрын
+Feint that's really hard to say. I bought this truck knowing it had problems so I could make videos on it. Now that I fixed the problems I would say that the trucks very reliable. I would say check out the issue with the automatic transmission if you're thinking of getting an automatic. Also when you test drive it listen for a high-pitched whining that increases with RPMs this could indicate the secondary timing chain guides have worn out and it's a huge pain to fix but I do have a video on it. I don't however have a video on the transmission cooler bypass issue because I have a manual transmission.
Ry, do you think the bad smell from my vents has anything to do with a dirty blower?
@Rythecarguy
6 жыл бұрын
Probably not. It would have to be pretty nasty. I know it sounds funny but just take out the blower, take it away from the truck and smell it. However the smell it likely in the vents themselves. I just bought a smoker car and after replacing everything in there it still smells when I turn on the vents. grrrr
Thanks very helpful 7/32 nuts
Heater fan not working. Checked fuses, replaced relay, resistor, panel with switches (fan speed, air flow, temperature, a/c, defrost, recycle air), new motor! Still fan is not working. Bad ground? Thought this might be a good puzzle for you :)
I want that shirt!
@Rythecarguy
2 жыл бұрын
Here ya go 😂 represent.com/ry-the-car-guy-vintage-tee/?variant=78401817
yup, the resistor is an easy fix. But the Gen 2 Xterra is a bit diffrent, OK a lot different. It has it as a credit card slide that is accessed from under the glove compartment and is attached by 2 screws and a power clip. I did that this summer. cost $30
What size bolt heads hold the blower motor fan In place? I've tried 6-7-8- and 9 and none work?
@Rythecarguy
4 ай бұрын
I believe they are 5.5
What size socket do you use for those 3 screws? 5 mm?
@the_hwyman
6 жыл бұрын
It's 5.5 mm. 7/32" will get you close as well but with a bit of play.
@lecyalphamaids9134
3 жыл бұрын
@@the_hwyman WOW, got myself both the 7/32 and the 5.5mm, both seem to fit the same, but you say the 5.5 is tighter? have to figure that out. AND, why do they do that, what the heck is wrong with having some kind of standard, nothing, but they dont do it, it could be 5mm or even 1/4, BUT they just needed to make it 7/32, WOW, bums all of them! and they know they did that to us out here. but the bottom where they went is, flathead, phillups, then of course the star tool, and allen wrench.....INSANE!! then all of those different sizes, WOW. it needs to be illegal what they have done to us out here. the 2009 XTERRA is just about a nightmare for the number 3 i think it is SPARK PLUG. intake manifold taken out to get to it and replace, AGAIN INSANE! EVERYONE, AM I WRONG???
Would this be the same with an 01 model Xterra?
@Rythecarguy
6 жыл бұрын
It may not be the same but it will likely be similar.
Where can I check for Xterras fuse man
شكرا لك علی هذا المجهود اللذي تقدمة علی هذه القناة انا لدي xteera وقد استفتدت من قناتك ارجو ان تظيف الترجمات لمقاطع الفيديو خصوصا العربية لتعم الفائدة محبك من قلب الصحراء السعودية
@Jamarkus_Delvonte
4 жыл бұрын
Allah ackbar
Will this video work for a 2009 Nissan Xterra?
@Rythecarguy
Жыл бұрын
Yes, it should be the same. If not, it will be VERY similar.
same story here... I was at Jiffy Lube and the one Day someone decided to actually do there job there and check the in cabin air filter (been going to the same one for 5 years they never checked it) well it was completely awful hair, tree debris, dirt etc was literally all up in that shit..LOL!!! And guess what? now there is a buzzy sound... thankfully I can check it myself!...
@Rythecarguy
2 жыл бұрын
Lol aren’t they gross?! Luckily they are pretty easy in the X to drop out and clean. Gunna keep up on that filter from now on? I know I am.
On my 2009 Xterra, I had quite a surprise when I changed the cabin air filter. It seems that I was traveling with a stowaway who had decided to make his nest just above the cabin air filter. I removed the cowl cover between the windshield and the engine compartment, and I installed a sturdy anti-rodent mesh above the air intake of the ventilation system on the passenger side. I don't understand why, from the start, Nissan did not block access to this opening against the infiltration of harmful little critters. This opening is easily accessible to small rodents, passing through the inside of the fender trim, then through an opening allowing the passage of the antenna cable and the windshield washer hose.
@Rythecarguy
Жыл бұрын
Oh no! That's what happened to my Titan!! Sorry to hear that. It's really strange that they don't put mesh in it. In fact, that's a great video idea.
@KenMcLeodBC
11 ай бұрын
Oh, that's where they got in. I have a 2008, and same thing. Couldn't figure out how they got through the little holes in the cowl...they didn't. Thanks for the tip!
Do you think I can replace the blower motor on a 2015 Nissan Versa? It's on the Driver's side, looks like.
@Rythecarguy
6 жыл бұрын
I believe that you can do anything!! :)
@maryproveaux9200
6 жыл бұрын
Ugh! I Guess I'm going to the dealer to pay $1k to get a twig out of the fan.
@Rythecarguy
6 жыл бұрын
Lol why!?! Try if for yourself. It should be easy.
Hey so ireplaced the motor and resistor . It still won’t blow.When I turn it on it’s a small squeak
@Rythecarguy
3 жыл бұрын
Start looking into your electronics. Fuses and relays and shit.
What if it's barely blowing? I will turn my speed up max and it doesn't change.
@Rythecarguy
Жыл бұрын
The switch in your dash might be dead
3 small screws? What size ?
@Rythecarguy
4 жыл бұрын
Don’t remember, was years ago.
@Jamarkus_Delvonte
4 жыл бұрын
5.5mm
@lolosdream
4 жыл бұрын
@@Jamarkus_Delvonte Thanks! Someone put these damn quick connect on mine (lazy a**). Didn't know what nut size to replace with, saving me some time!
Oh yeah, and I have a 2011 Nissan Xterra X
lol. one leaf.
Cool. Easy as shit.
@Rythecarguy
2 жыл бұрын
For sure.
I took my motor out to dump out the leaves, put it back in and now it won't work
@Rythecarguy
Жыл бұрын
I hate to be that guy but did you plug it back in? Make sure that the electronic plug is really well seated
Thanks. Parked in town today and somehow a chipmunk got in there. Out and dead now.
@Rythecarguy
Жыл бұрын
Awww make you you check your cabin filters.
WHAT THE FUCK SIZE ARE THE LITTLE SCREWS!!!
@Rythecarguy
Жыл бұрын
I DONT FUCKING REMEMBER!! LOL. They look like 7mm on the video to me. I am about 1000 miles from my Xterra right now I would run out and check.
Thanks!
Thanks for the video! Replaced my cabin air filters and found a tiny acorn made its way into the fan, made a light, audible, off balance, whirling sound at 1/2-to-Full fan speed.
@Rythecarguy
3 жыл бұрын
So annoying right! Even the smallest thing can create noise in there.
What size bolt heads hold the blower motor fan In place? I've tried 6-7-8- and 9 and none work?
@Rythecarguy
4 ай бұрын
I believe they are 5.5
@thomasvlahoff3561
4 ай бұрын
@Rythecarguy you are correct, or 7/32 thanks Ryan and happy st.patricks day!
@Rythecarguy
4 ай бұрын
@@thomasvlahoff3561 right back at you! 🍀
Thanks!
@Rythecarguy
2 жыл бұрын
No, thank you! I appreciate the support.