Another great video and another easy repair on the Element! When I replaced the radiator I unbolted the fans and left them in and pulled out the radiator by itself. Just takes a little wiggling but the opening is too narrow to pull it out fans and all.

@pattayperformance

3 жыл бұрын

Ellis Mowers thanks for the tip! Hopefully mine last as long as yours!

Thanks boss. You simplified what seemed like a complicated repair.

@pattayperformance

3 ай бұрын

RIGHT ON! GREAT JOB!

Thank you for this excellent video! Saved many dollars! A little jiggle, a little wiggle, 30 minutes later, cleaned up done.

@pattayperformance

Жыл бұрын

Glad it helped!

Great info for the DIY people. Thanks for getting this info out there and showing just how easy it is to fix it yourself.

@pattayperformance

3 жыл бұрын

Thanks Uncle Ed! I’m running out excuses why I don’t cook for the Mrs. 🤣

@cheapers1952

Жыл бұрын

Thats correct to some extent all of the elements I have done have wiring also attached to the condenser fan shroud. also most videos on material or repairs do not show at the end if the repairactually is correcting the problem!!

Thank you!! The only video that shows how to undo that annoying white clip on the bottom

@pattayperformance

5 ай бұрын

RIGHT ON! Glad I was able to capture it for you!

Great work buddy got to have that cold ac bud very important sounds like you really know your stuff bud

@pattayperformance

3 жыл бұрын

I’m getting fragile in my old age🤣🤣🤣

Good job Mr P ..... and Mrs P for holding the camera :).

@pattayperformance

3 жыл бұрын

MegaDirtyberty Mrs here...I’m blushing. Thank you for all your support. Sometimes it’s hard to find good talent these days. Thank goodness this guy isn’t half bad and easy on the eye to film 😉

@MegaDirtyberty

3 жыл бұрын

@@pattayperformance Awww shucks, I'm just happy to help :).

Thank you this helped so much I actually Took the three bolts from the hood latch so it was an easier removal and installation

@pattayperformance

2 жыл бұрын

FANTASTIC JOB! more than one way to slice bread! In the end its done and you saved a BUNCH OF MONEY!

@DAISEYLEETHE1ANDONLY

2 жыл бұрын

@@pattayperformance yesssss i was super excited thank you a million !!!

Ha!! Mine is a 2006. 197,000 and counting.

@pattayperformance

Жыл бұрын

Hopefully you have better luck than me!

Well another good one Jason great camera girl there now send that Honda down the road get your self a chevy 1500 just playing with you I have a 1919 chevy Z71 and a 1955 chevy pick up completely restored my baby any way tell the mrs I said hi great cam work

@pattayperformance

Жыл бұрын

That would be cool! goal is an older pick up truck to match my mechanical skills!

Hey Pattay's! Thanks for this awesome video. I was inspired and wanted to change out my own fan but ran into a couple issues after acquiring all the materials in your video. Can you please assist? 1) I have a 2006 Element so do you have any idea if this is applicable to your video since it is a different year? 2) I crawled underneath to remove the hose from that clip as instructed but the entire front section is covered in plastic paneling. Did you already have this removed prior to starting your video? It is quite tight under there and difficult for me to access all the plastic bolts to remove them, and they seem to be all inter-connected (2-3 different panels). I tried to slip my hand down to remove the clip from the top but i cannot fully reach it to remove and tried multiple tools to finagle it out but was unsuccessful so I cannot move forward. Currently my vehicle is sitting in driveway with the top panel removed and I have everything I need to move forward but cannot access the clip. 3) Did you disconnect anything else before you started the video? Battery or otherwise? 4) those plastic bolts underneath are already is weird condition probably from being taken out so many times previously and I am missing some. Do you have the link to the bolts and the name of that tool that you used to remove them? I got the top ones out with just the flat head screwdriver but the ones underneath are more stubborn and already stripped a bit, I might want to just replace with new ones.... Thanks in advance!! Looking forward to finishing this project. Update** I ordered the clips on amazon and it came with the tool to remove them lol 🙂

@pattayperformance

Жыл бұрын

1) Yes it will be the same 2) Mine was already removed due to me having larger tires. The larger tires were rubbing against the plastic trim piece. You need patience or a special/simple tool. Same process to get the top ones on the cowling as well as the bottom ones. They are plastic and coming up on almost 20 years old. So if they break don’t be upset, they are cheap and easy to replace. 3) there is no need to disconnect the battery but if you want to feel safe by all means go ahead and do it. 4) you purchased the same kit I was going to link you too! AWESOME 5) my apologies for the delay in response…are you on Instagram? Can always send me pics and videos

great performance but what was the EXTRA loud noise after the fan was installed. were the blades hitting the plastic shroud?

@pattayperformance

Жыл бұрын

thinking the exhaust leak when I started it

👍🏻👍🏻

@pattayperformance

3 жыл бұрын

🤙🏻🇺🇸🔧🦅

You mentioned how to tested the fan it wasn't working. Would you be willing to explain more? Thanks

@pattayperformance

2 жыл бұрын

I jumped the fan using a small battery. It wouldn’t spin.

how can you check the relay for the ac fan i jumped my fan did not spin went to the yard ans jumped another one did not spin either 😫

@pattayperformance

Жыл бұрын

Fan relay should be the same as others like the horn. Swap relays around… If you jumped the fans using a power source and they didn’t spin, buy new fans

First good job replacing that fan

@pattayperformance

3 жыл бұрын

Kajler Dog thank you! Did you end up getting the Troy Bilt Tractor?

@kajlerdog628

3 жыл бұрын

Pattay's Performance yes it is running good

@pattayperformance

3 жыл бұрын

Kajler Dog Awesome! 🤙🏻🇺🇸🦅🔧

I surprised that the engine temp did not show any problems .

@pattayperformance

3 жыл бұрын

Chris's small engines, Excellent question/comment. There is already a dedicated fan for the cooling of the engine. Honda has a split/dual fan system. One for cooling and one for ac... With the AC fan working you should experience colder AC temps at idle/stop/around town driving.