How to Replace Steering Rack 2001-07 Toyota Sequoia
Автокөліктер мен көлік құралдары
Buy Now!
New Rack & Pinion Assembly from 1AAuto.com 1aau.to/ia/1ASTG00008
The rack and pinion assembly transforms the turning motion of your steering wheel to the push and pull motions that turn the front wheels of your vehicle, as well as adding the power assistance. If the steering rack on your vehicle is leaking, or damaged in some way, you might need to replace it entirely. This video shows you how to install a new TRQ power steering rack and pinion assembly on your 2001-2007 Toyota Sequoia.
• Check here for more videos on the 2001-2007 Toyota Sequoia: • Toyota Sequoia 2001-2007
This process should be similar on the following vehicles:
2001 Toyota Sequoia
2002 Toyota Sequoia
2003 Toyota Sequoia
2004 Toyota Sequoia
2005 Toyota Sequoia
2006 Toyota Sequoia
2007 Toyota Sequoia
Tools you will need:
• Pry Bar 1aau.to/of/1AXAA00020
• 16mm Wrench
• 17mm Wrench 1aau.to/oc/1AXAA00010
• 22mm Wrench
• 12mm Socket 1aau.to/ot/1AXAA00015
• 19mm Socket 1aau.to/om/1AXAA00043
• 22mm Socket 1aau.to/oa/1AXAA00266
• Adjustable Wrench
• Large Locking Pliers
• 1/2 Inch Air Impact Gun 1aau.to/od/1AXAA00252
• Air Chisel 1aau.to/ob/1AXAA00270
• Socket Driver
• Swivel
• Torque Wrench 1aau.to/os/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Bungee Cord
• Floor Jack 1aau.to/oj/1AXAA00068
• Hammer 1aau.to/og/1AXAA00091
• Jack Stands 1aau.to/ok/1AXAA00065
• Wire Brush 1aau.to/oc/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Toyota Sequoia 2001-2007: • Toyota Sequoia 2001-2007
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 33
The patience of JOB. This is awesome showing real life mechanic problems. . doing my rack soon. Thanks for the education.
I couldn't do this job without cussing at least 80000 times
Wow, your video is amazing. I was able to do the whole job by myself and thanks to your list in the description I had every tool I needed on hand before my car was in drive able. But I had some major BS happen to me… literally the last thing I was doing was tightening down the two hydraulic lines on top and on the second one the actual housing with the threads cracked in half 😡 so now I have to do the entire job over again lol but it’s going to be much easier the second time. Thank you for you amazing video 👍 and thank goodness for warranties
Thank you for the clear and concise video! 👍
Nice and easy explanation, very well done, my job was easy thanks to your vedeo
Blessed with a rust free Florida truck.
Did you replace the o-rings on the power steering lines that feed into the steering rack? I didn't see that but I believe it's recommended?
Great job, thanks so much
The 22 ml bolt on the left of the steeeing rack (6:26) is clinking when turning my steering wheel. Do you think its just loose??
Enjoyed video!
The flare nuts are 15 and 17. There is no 16. Nice video besides that. With the right tools, you can get a torque wrench on the center bolt. Or just move sway bar out of way. You’ve got torque specs mixed up. Per the FSM, 22mm nut is 96. Vertical one you couldn’t torque is 122. Both on right side bracket at 122.
I think TRQ found a Tundra at the bottom of the ocean for all their demonstrations.
How long did the replacement take?
What the name or part number of the joint you replaced?
Great video but man you absolutely covered everything under that truck with anti seize.
Great video, just bought your rack from 1A for our 2006 Tundra. Do you have a part number for the OEM shaft coupler just in case ?
It didn’t come off because some of the bolt was still in the groove of the rack..
What it's the name for the part from dealer
What's the average time of workmanship for this?
Just did an 02 sequoia. I changed the rack and pinion , all power steering lines, all 4 camber bolts/sleeves/nuts , both lower control arms, both lower ball joints, both outer tierods, and sky bar links. It's been one hell of a job. But now adding fluid to power steering resivour and im not able to get it to breed any advice? I have it ¾ full and turning wheel both ways to stop and not getting much of any fluid level change it's staying at ¾ full.
@LuisBazan
2 жыл бұрын
Im needing to replace all of those on my 02. About how much did it cost for everything?
Did I miss the part on centering the rack before installation or does this come centered already?
do you have to center steering wheel when you bolt it back to rack
I have 2002 Toyota Sequoia limited n mines went out ? Don't know what to do 😮?
@TRQ
7 ай бұрын
+@aliciawilliams5545 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Great video! Thx
@TRQ
2 жыл бұрын
+Mickey Doolittle Thanks for watching our video! 1aau.to/m/Shop-TRQ
Great job...Unfortunately 18 months ago i went to a shop to get a rack and it was cheaper to get the reman rack $800 vs an original for $1300.Boy did i get screwed.Your site sells an original rack not reman for $364.00.I do not trust shops anymore, it is just gross.My truck makes a noise whenever i turn it and i'd rather have my old rack on which was smoother than this reman.
Mangled that thing
Good lord the rust. I seriously would have stopped doing auto repair professionally if I had stayed living in the northeast. I remember torches, rusted bolts breaking, lots of penetrating oil, etc etc. I am older now and absolutely would not have the patience for this BS anymore. Thankfully the past 23 years I have lived in FL and AZ. No dealing with rust
Tell the owner of that Sequoia that there was a RECALL on rusted frames they replace it for free
@benbowers8827
Жыл бұрын
That was years ago. Good luck with that.
No way i can do thisat home