How to Replace Serpentine Belt Tensioner 2001-07 Toyota Sequoia
Автокөліктер мен көлік құралдары
Buy Now!
New Serpentine Belt Tensioner from 1AAuto.com 1aau.to/ia/1AEBT00109
The tensioner is a springed device that keeps the serpentine belt in your vehicle at the correct tension to keep it on the pulleys, without being so tight that it breaks. Eventually the tensioner may become worn, loose, or stuck, resulting in belts that squeak, slip, or fall off. This video shows you how to install a new TRQ tensioner pulley in your 2001-2007 Toyota Sequoia.
• Check here for more videos on the 2001-2007 Toyota Sequoia: • Toyota Sequoia 2001-2007
This process should be similar on the following vehicles:
2001 Toyota Sequoia
2002 Toyota Sequoia
2003 Toyota Sequoia
2004 Toyota Sequoia
2005 Toyota Sequoia
2006 Toyota Sequoia
2007 Toyota Sequoia
Tools you will need:
• 12mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 12mm Socket 1aau.to/oa/1AXAA00015
• 14mm Socket 1aau.to/oa/1AXAA00015
• Hose Clamp Pliers 1aau.to/oa/1AXAA00076
• Pliers
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXAA00044
• Drain Pan 1aau.to/oa/1AXAA00320
Subscribe: / @trq
Check out our playlist:
Toyota Sequoia 2001-2007: • Toyota Sequoia 2001-2007
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 35
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
First of all, I want to thank you for putting this tutorial up. I have a 2004 Toyota Sequoia with 300,000 miles! I only use it to commute to work which is 30 miles round trip. I'm happy with my truck and I haven't had a car payment in over 10 years. I followed everything to the T and you were on point. I feel so proud of myself 😊 Thank you
Thanks for the video. I now understand why this service is so costly.
I just finished the job thanks for makin look so easy!!!
Thanks for video saved me alot of time
Preciate this,doing one early in the morning.👌🏾
Great video! Thank you!
The video was labeled "How to change serpentine belt 2001-2007 ....." There was no need to remove anything but the skid plate on my 06. Can't imagine what the labor charge would be for all of that, hope it's not for a customer .
Easy change only bearing of tensioner pulley. Chipper and save a lot of time
This video saved my bacon. And thanks to all the coin I saved following this video, I can go and buy lots and lots of bacon! Thanks for the detailed explanation. You made this fix super easy. Well almost. That fan clutch was a bear. Other than that, it was much easier than I expected. Thanks again!
Amazing content 👌 👏
You don't have to remove all that watch a nother videos is to much job I did my sequoia 04 only I remove the cover from the bottom
@MarshallBLewis
Жыл бұрын
Agree. I'm gonna put up a video showing the bare minimum. Half as much work and messing around
@TRQ
Жыл бұрын
+Eliseo Ureño Carrillo Thanks for the feedback! 1aau.to/m/Shop-TRQ
@gregoriogregorio22
Жыл бұрын
😂😂😂😂
Like you video,good work
El video es muy informado! Gracias amigo!
@TRQ
3 ай бұрын
+@leprechaunlune Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Thanks from me too. What a beatdown...
Thank you so much for this video. I have the Haynes book and they skipped a lot of steps. I should have watched the whole video through though. I reassembled everything before putting the new belt on 🤦♂️
@TRQ
2 жыл бұрын
+Juan Shagner Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Thanks bud
Followed the same steps for my 100 series land cruiser.
@Werthmkoo
Жыл бұрын
What year
@tristanramos593
Жыл бұрын
2000
Why no torque specs for the tensioner?
How long did that take you? Please and Thank You!!
I found with my fan shroud came off and slid past the fan ( just trying to contribute some info.☺️
Does the tensioner bolt need to be slightly loose? If mine is fully tight, it locks up and doesn't spin. If I loosen it about half a turn, it spins freely with no noise
What's giving me an issue is the fan/clutch, it refuse to come off of its pulley!
TFW you’ve assembled everything, and you find a 12mm bolt lying around…. Now I have to go back and find out where I need to put it
I was gonna try doing this myself but damn that’s a lot of work nevermind!!😳
@gregoriogregorio22
Жыл бұрын
😂😂
that coolant is a NO NO on those toyotas...pink only
You definitely don't need to take off that hose