Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00328
The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 2001-2007 Toyota Sequoia.
• Check here for more videos on the 2001-2007 Toyota Sequoia: • Toyota Sequoia 2001-2007
This process should be similar on the following vehicles:
2001 Toyota Sequoia
2002 Toyota Sequoia
2003 Toyota Sequoia
2004 Toyota Sequoia
2005 Toyota Sequoia
2006 Toyota Sequoia
2007 Toyota Sequoia
Tools you will need:
• Pry Bar 1aau.to/ogC/1AXAA00020
• 24mm Wrench
• 19mm Socket 1aau.to/okq/1AXAA00043
• 21mm Socket 1aau.to/okq/1AXAA00043
• Hose Clamp Pliers 1aau.to/o6/1AXAA00076
• Pliers
• Straight Cutters
• 3/8 Inch Air Impact Gun
• Socket Driver
• Torque Wrench 1aau.to/opo/1AXAA00044
• Paper Towels 1aau.to/odU/1AXSS00035
• Wire Ties
• Floor Jack 1aau.to/ohw/1AXAA00068
• Hammer 1aau.to/ogI/1AXAA00091
• Jack Stands 1aau.to/ogT/1AXAA00065
Subscribe: / @trq
Check out our playlist:
Toyota Sequoia 2001-2007: • Toyota Sequoia 2001-2007
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.