How To Replace Serpentine Belt Tensioner 2007-12 Dodge Caliber
Автокөліктер мен көлік құралдары
Buy Now!
New Accessory Drive Belt Tensioner from 1AAuto.com 1aau.to/ia/1AEBT00075
The tensioner is a springed device that keeps the serpentine belt in your vehicle at the correct tension to keep it on the pulleys, without being so tight that it breaks. Eventually the tensioner may become worn, loose, or stuck, resulting in belts that squeak, slip, or fall off. This video shows you how to install a new TRQ tensioner pulley in your 2007-12 Dodge Caliber.
• Check here for more videos on the 2007-2012 Dodge Caliber • Dodger Caliber 2007-20...
This process should be similar on the following vehicles:
2007 Dodge Caliber
2008 Dodge Caliber
2009 Dodge Caliber
2010 Dodge Caliber
2011 Dodge Caliber
2012 Dodge Caliber
Tools you will need:
• 15mm Wrench 1aau.to/oa/1AXAA00010
• 13mm Socket 1aau.to/oa/1AXAA00015
• 15mm Socket 1aau.to/oa/1AXAA00015
• Serpentine Belt Tensioner Tool 1aau.to/oa/1AXAA00019
• Trim Tool Set 1aau.to/oa/1AXXX00006
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXAA00044
• Floor Jack 1aau.to/oa/1AXAA00068
• Jack Stands 1aau.to/oa/1AXAA00065
• Ratchet Strap
Subscribe: / @trq
Check out our playlist:
Dodger Caliber 2007-2012 1st Generation: • Dodger Caliber 2007-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 33
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
At the 3:00 mark, you say to remove the bolt on the tensioner to remove it, another way to do it is take the bolt out of the coolant res and move it out of the way and the tensioner will come out as 1 piece that way and you can put the new one in the same way.
Fantastic very well explained video. Appreciate you sharing it!
Thanks! I’m getting ready to replace mine & a new belt! Looks like it’s gonna be pretty easy to replace! 😊
WOW, BEST PRESENTED HELP VIDEO IVE EVER SEEN !
Excelente video My friend, it helped me a Lot!!
Great tutorial. Thanks!
Excellent video.
Great video
Great video! thx
Very usefull thanks... 👍
I have air tools but no compressor atm but I can simply unbolt the tensioner pulley while it’s still bolted on the engine correct? I’ll just have the new pulley removed beforehand. Great video btw. Very helpful. I just bought a used 2010 Journey from a friend and I going through everything…
Perfect
Thanks
Great video thanks
@TRQ
2 жыл бұрын
+Steven Kelble Thanks for watching our video! 1aau.to/m/Shop-TRQ
Thank you I needed and learn how to do I realize what I did wrong
Thank you so much for this video. That plastic cover you took off after you took off the tire what’s it called? That’s what’s missing on mine.
@TRQ
Жыл бұрын
+Maria Mota Thanks for watching our video! 1aau.to/m/Shop-TRQ
Helpful thanks
@TRQ
2 жыл бұрын
+Chris Parsley Thanks for watching our video! 1aau.to/m/Shop-TRQ
How did you pull the pin out to keep it locked
Frist coment. 😅. Thanks.
What size socket for the loosening
@Dave1979z
Жыл бұрын
15 for aftermarket, 16 for oem.
Can't get it from above?
Can I just remove the pulley without straping it out the way or is it not possible
@Dave1979z
Жыл бұрын
That's what I was thinking also.
@Dave1979z
Жыл бұрын
Remove the pulley first that way you just have access to the bolt. I'm going to try it here shortly and I'll comment back to let you know.
@Chris-sl2ir
Жыл бұрын
@@Dave1979z did you try it? I just replaced my pulley because the belt is coming coming off a 1/4 inch. So I think I need to replace the whole thing.
@joshvandall2717
Жыл бұрын
Yes you can.. i just done it today, just make sure you use an open end wrench to loosen the pulley bolt.
What if pin is stuck an wont come out
@tt7hvn
Жыл бұрын
Exactly the problem I'm running into. It's in there so tight, I can't rotate the tensioner to relieve pressure off the pin.