Pays to be handy when you own an rv. Never would have thought it would have been so fast to replace the rv sewer gate.

@TheHungryCubanAdventures

3 жыл бұрын

We did not either. But I saw a couple of YT videos and it seemed pretty easy. Thanks for watching

Great video! Thanks for sharing all this information! Stay safe and healthy!

@TheHungryCubanAdventures

3 жыл бұрын

Thank you Ramon

The Hungry Cuban Adventures name is hilarious... :-D Thanks for the video, very helpful for this Not So Hungry Cuban in NC. Cheers!

@TheHungryCubanAdventures

3 жыл бұрын

Haha. I had a catering company by the name of The Hungry Cuban. Once we stated traveling we kept it and added Adventures. 👍 gracias hermano

Getting ready to do my black valve! Your video was awesome. Thank you

@TheHungryCubanAdventures

2 жыл бұрын

Thank you and have fun.

I (Phil) did this for the black tank last year in Florida. The flushing took the longest time and then making sure I never cross-contaminated anything I touched!

@TheHungryCubanAdventures

3 жыл бұрын

I agree, washed and cleaned everything well. 👍

I would still use rubber gloves regardless that the tanks were emptied.😊. Also its easier if you removed the black water waste gate valve. No chance of pinching the gaskets.

Good job! Impressive pace! Clearly you are now NASCAR PCQ (Pit Crew Qualified)!!! Have to go now- headed out to my rig to measure mine and order spare valves for our trip to the Keys this week. I'm a bit worried as my valve bolts are rather rusted up. Have to soak them well ahead of a project! All the best Joe and Joy M

@TheHungryCubanAdventures

3 жыл бұрын

PCQ Poop Crew Qualified is more appropriate. Lol 😂 enjoy the Keys. I grew up going there every spring for lobster season.

Nice job getting it done so easily. Is that a tank level indicator in your wet bay? I sure wish we had one in ours. It would make tank flushing so much easier.

@TheHungryCubanAdventures

3 жыл бұрын

It is a tank indicator but they don’t work. 😢

Thank you! I think I can!!

@TheHungryCubanAdventures

2 жыл бұрын

Yes you can! 👍

@kimcrenshaw

2 жыл бұрын

I did it! All by myself! 😁😎. Thank you so much.

@TheHungryCubanAdventures

2 жыл бұрын

@@kimcrenshaw that’s awesome!!! I knew you could. 👏👏👍👏

A smidge of dielectric grease on both sides of each gasket helps in assembly & seal. 🍻

@TheHungryCubanAdventures

Жыл бұрын

good to know thank you

It looks like the same value on the black tank. If one broke should you expect the other to break? Maybe replace it or have a spare ready?

@TheHungryCubanAdventures

3 жыл бұрын

I thought about changing them both but they are pretty easy to get like at Walmart.

You only needed the handle, that was overkill...I have replaces my handles and saved a lot of money and time.

@TheHungryCubanAdventures

2 жыл бұрын

Glad that worked for you

I wish mine were right out in the open like yours are. Mine are under the rig, inside of an insulated enclosure. The access hole is two feet away from the black and gray valves (who does that?) which makes it completely worthless. I had to cut a new access hole and even then I have to be a contortionist to reach two of the screws. After the old valve is out and I'm trying to slide the new one in I can't really see the gap well enough to know if the seals seated properly or not. What a royal pain.

@TheHungryCubanAdventures

Жыл бұрын

Wow I am glad mine are accessible. Sorry you had to go through all that.

Hello brother hope you had a great holiday season with your love ones. Is there some type of sealant required to prevent leakage? Thanks Ivan

@TheHungryCubanAdventures

3 жыл бұрын

Thank you Ivan. Happy holidays to you. No I did not use any sealant. The gasket and the tight fit makes it very easy to replace.

Now imagine your valve is in a fiberglass box with absolutely no clearance to work. You are lucky everything is wide open. Thats why you can do this job in a few minutes and make it look easy. Try this on a 2014 Forest River Lexington.

@TheHungryCubanAdventures

2 жыл бұрын

Sorry it did not work for you. I know some RV manufacturers don’t make things easy.

You can actually just replace the handle, you can even get metal ones.

@123seaoats

3 ай бұрын

That was my first thought. I spent $4.99 on a new handle. It was plastic, so I just drilled out the hole big enough to slide over the valve stem and put a nut on it. Stronger than it was before.

Screw the gloves

Two words - silicone grease

@TheHungryCubanAdventures

Жыл бұрын

Still had to replace it.

@TheExcessive1

Жыл бұрын

@@TheHungryCubanAdventures I was referring to putting silicone grease on the seals before you tried to insert the new valve between the flanges. Makes it much easier.

@TheHungryCubanAdventures

Жыл бұрын

Thank you

Need better lighting and a mat to throw tools down on

There has to be an easier way