Buy Now!
New Inner Fender Liner from 1AAuto.com 1aau.to/ia/1ABMX04206
This video shows you how to install a front fender liner on your 2000-2006 Toyota Tundra. Fender liners protect the body and engine compartment of your vehicle from road debris, water, dirt, sand, and the like. If yours is worn, ripped, damaged, or missing, it’s a good idea to install a new one to protect your vehicle.
This process should be similar on the following vehicles:
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obn3/1AXAA00013
• 10mm Socket 1aau.to/obfj/1AXAA00017
• 21mm Deep Socket 1aau.to/oajT/1AXAA00043
• Trim Tool Set 1aau.to/oaeD/1AXXX00006
• Ratchet 1aau.to/obET/1AXAA00016
• Torque Wrench 1aau.to/oaIL/1AXAA00044
• Gloves 1aau.to/oaeJ/1AXSS00048
• Safety Glasses 1aau.to/o7F/1AXAA00343
• Floor Jack 1aau.to/o8s/1AXAA00068
• Jack Stands 1aau.to/oVU/1AXAA00065
• Pick 1aau.to/oQ5/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.