How to replace Headlight bulbs in Chevrolet Tahoe 07-14
Автокөліктер мен көлік құралдары
Hi, quick video on how to remove replace change install headlight bulbs in 2008 2009 2007 2010 2011 2012 2013 2014 Chevrolet Tahoe i think also silverado and suburban. low and high beam.
Пікірлер: 155
Thank you so much for this! Dealer quoted $140 for bulb replacement. Did it myself in 3 min. $32 for bulb. Take that dealership!
This dude was the most simple replacement u-tube of all! It worked like a charm on my 08 avalanche! thank you!
I never comment on videos but I can't tell you how much I appreciate this video. I saw the other ones about going in through the wheel well and taking off the bumper and I thought I may as well just take it to the garage... Just finished the replacement on my own in 5 mins using your technique! You probably saved me $200 for garage visit for a light bulb. Thank you!!!
Great video and in under 5 minutes!!! I was looking for videos like this but most took too long. Your video showed everything I needed and you made it look so easy. This is a perfect example of a DIY video....Quick and easy to do! Thanks for taking the time out of your day to make this video that I'm sure will help so many others! 😀👍
I just changed both my low beams today. I was able to pull it out a bit just enough to fit my hand. But i did and im a 50 yr old woman 😂. So proud of myself.
Thank you for keeping this under 5 min. Good video and I'm glad I didn't have to take my bumper off. I have big hands too and I was able to just barely squeeze through and get the job done. Thanks again.
Thank you for sharing fastest method for replacing the headlight bulbs for these Chevy Tahoe’s. It took me one minute to replace mine. The plus side of all his is that it beats them other YT DIYers suggesting to remove the bumper, grill, two side fenders and the radiator just to replace the bulb.
Wish I would have found this video before I took my truck yo have the right headlight replaced. They said they had to drop the grill and everything $200 for a headlight. Needless to say my left side just went out. Thanks your a life saver
Be aware: the video is replacing the HIGH BEAM BULB (inner bulb) and most drivers will be replacing their regular (low beam, OUTTER bulb).
@robertrtr1603
8 ай бұрын
He changed both of them
@shannonsylvester3071
8 ай бұрын
Both bulbs are available. I do it this way as well. Works great.
Thank You Brother, You Are My Hero!!! I watched and tried several other videos for replacing headlight bulbs on my 2007 Chevy Tahoe. Most had too many steps. I tried your way and had both low beam bulbs removed and replaced in less than 10 mins. Thank You, Thank You, Thank You!!!
HUGE Thumbs Up!!! Something was telling me it was this easy. Took me under three minutes. All the other videos show you have to loosen all the screws. Thank you for taking the time to post. I'm going to share the link.
These come from the factory with a screw in the lower outside of the assembly. You have to go into through the wheel well to access it. Someone left them out or broke the tabs on the vehicle.
This is the simplest and best video for changing the headlights on a 07 Tahoe. Appreciate it. Took 10 minutes tops. And I'm really mechanically challenged.
Dude, what the heck?! This video was like having a cheat code for video games, totally made it easy. My light has been out for over a month due to the inconvenience of all the work but this here is what I’m talking about. Thanks a million.
Thank you! I've changed the entire headlights and know what a pain that is. I didn't think this would work because I have big hands, but it worked like a charm and I was done in just a couple of minutes!
@sebastianortiz2359
9 ай бұрын
What kind of bulbs tho ? Is there a specific size or brand ?
Good stuff bro. No b.s. straight to the point. You saved me A LOT of time. Thank you
Thank you. Quick and fast and very informative. Also, no reason for a person is not able to do this themselves, as you can do it with one hand.
This video really helped me get the lightbulb out I thought I really had to take the bumper off appreciate the video keep rockin
this is awesome! my husband is gone so I came across your video to help me and it was so it easy. thanks
This video is spot on! From the time I found my 10 mm socket it took me no longer than 10 minutes to change the driver's side high beam bulb. Yeah...it was a little tight. I have normal hands for a male. Thanks "repairED" Jeff D
appreciate this!!! i watched this other dudes video and he was taking the wheel well apart and going in from there to unbolt stuff HAHAHAHA
@memphis0
5 жыл бұрын
@@marcusmullis6076 dude seriously went in through the wheel well to change his light bulb.
@KikisCheetos1310
4 жыл бұрын
On god just for a fucking light bulb lmao I ain’t tearing apart no bumper and wheel well and all this shit
@dubub6985
4 жыл бұрын
He did it that way car if ur light hasn’t been out of the cuz before there is a bolt behind the side of the bumper that will need to be losing before the light will come out even removing the top two bolts won’t let the light come out if the bottom isn’t lose
@memphis0
4 жыл бұрын
dubub6985 i’ve unbolted a few things on top and gave been able to get through like that... i should make a video?
@Gunz-N-Grillz
3 жыл бұрын
memphis0 yeah man cause I need to replace a DRL and gonna upgrade my highs and lows while I’m at it,but even one removing the whole damn front end damn near and I’m not doing all that crap I’ll ride with a light out lol
Love it! Took me about 10 minutes Had a problem unhooking bulb, great tutorial on replacing bulb! Thanks you saved me $100 bucks
That god that you uploaded this!!!! Thanks man!!!!
Thanks for the instruction. Saved me a lot of time and money.
Thanks! You saved me a lot of time.
THIS VIDEO HELPED ME A HELL OF A LOT!!! Just changed my bulb…only took 5 minutes…
This video is very helpful I had to change my low beam which is a little tighter to reach so I unplugged the connection first then screwed the bulb out, screwed the new bulb back in then reconnected the wire.
Appreciate the video man. Very helpful and not too long.
Thank you, you made it so easy for me to do.
Great video!! Helped out a lot easy and simple the way you explained it!! Thanks!
Just did it following your video, worked perfectly!!!
"Thank You" for this video it was helpful.
Thank you! I was about to start breaking stuff to get these changed!
Thanks a lot for the video.... I spend more time going to the autoparts than I spent replacing the bulb.
Just replaced the bulbs on a 2014 Tahoe, big time thank you!! 💯👍👍
The clips on my 2009 were on the sides but other than that, it was exactly the same. Great video. To the point.
Thank You, it helped me change the bulb when stopped at a hotel on the way home.
1st time to comment on any video, fast, to the point, great, thank you!!!
Great vid. Saved me a lot of time.
Thanks man!!! In my 2002 model it was much easyer and I had plenty of space to do the job ! ;))
Thanks for Video very helpful, Saved me a lot of time
thanks for making this video was very easy to install light bulb, much appreciate !!!
Great video I just wanted to find out how you replace the bulbs because my sister Vehicle just had a Bad Buld Lowbeam and I Going to try and replace it for her Thank you for making this Vid. 🙏🏼🙏🏼🤗⛈🤗🤗👍🏼👍🏼👍🏼👍🏼
Thanks alot here in 2021 and it still works.
I almost pulled my washer fluid reservoir and anything else in my way thanks for the tip my dude!
Thanks Ed....worked perfect
@newsveteran4466
4 жыл бұрын
"perfectly"
Thanks man! Just finished. It took me 10 mins to complete, with 5 of those mins being spent looking for my ratchet set. Thanks again
@colbeybruney1917
5 ай бұрын
Did you replace the high beam or low beam? The low beam looks a little.bit harder to get to
@SuperTwinz1422
5 ай бұрын
I think it was the high beam, but both lights are easy to access. I was more focused on keeping my fingers off the bulbs. Heard the oil from your fingers can mess up the bulb. It was easy man, go for it and save the money.@@colbeybruney1917
Did it! Thank you! Whooop!
Thank you so much! Not hard at all!
Thanks! We did it😁
First time having to do this saw others taking out side well and some even taking out grills this was literally 5 mins and I didn't fuck it up awesome video thanks brother.
@22beefrey
4 жыл бұрын
Other way you see with the wheel well and grill being loosened is technically how GM wants you to do it but you would have to be a moron to not try this way first.
@dlandrum
3 жыл бұрын
When I loosen those two my light won’t pop out. I’ve tried and tried. It’s like it’s stuck on the right hand side. Any tips or trips to get it lose. I’ve tried it and afraid I’m going to break it. It’s a 2011
thanks for this.. took me less than 10 mins!
Thanks for the video.
Thanks for the video 🤙🏼 very helpful
I was just about to take the entire front clip off the Tahoe because I assumed it was like my wife's Cadillac...thank you.
Well done video, thanks for the assistance.
Good video, man. But for those attempting the "quick way" like this, it won't be feasible if you have big hands with little dexterity. You'll need dexterity and patience if you want to attempt this, but it CAN BE DONE if you can get your hand down there.
Thank you that was awesome
Thank you!
Thanks 5 mins done saved 125 plus tax at shop
Very cool. My 5yr old and I got it done within 20mins once we found the 10mm tool. Good learning day.
Thank you. Much easier than opening wheel well.
Thank you super easy 🙏
Thanks man great
Thank you sir
Nice..! I will try...
Pro tip: install the new bulb first into the light assembly, then make the electrical connection.
The early model 2000s you have to remove the grill, great engineering GM congratulations. Later models are supposed to have a pin that you turn just turn the pain in the light housing all comes right out
Thank you for this
You have some small hands. My Tahoe also has a side 10mm screw that was behind the wheel liner. There is NO way i'd of fit my hands in there without undoing that. Good video though. straight, to the point, no long random discussion.
Good Video🙌🏽
Gracias amigó por tu vídeo m alludo bastante
Thank you very much!!!
Thanks!
I watched because I thought I was doing something wrong and when you said take off the whole bumper said let me get my extra large hand in there and make it happen.
Nice and fast way to do it
Much easier than taking the wheel well apart
Good job man 🫡
Thank you
good video
Thanks big hommie
thanks bro
Did you loosen the bolt behind the wheel well?
Well I’m about to go give it a try. If it works for me you just saved me 150 bucks that they were trying to charge me at the dealership and 100 that the guy on the corner was trying to charge me... and that was the price even though I already have the bulb. 😒
Спасибо.
This is a pain in the ass to do, but thanks for this video
Thanks
Simple n EZ!
One more question . Is it possible to replace a H11 bulb with a LED "bulb" ? There are reflectors for near and fare lights . What will be the result ? Better or worse ...??
Before you put it back turn on lights to be sure they are working.
@TruongNguyen-ef8oj
4 жыл бұрын
Thank you sir!
Do you need to disconnect the battery or no? Just asking
Русский акцент непобедим!!!))) Сейчас пойду менять на своей натахе галогенки на led. Спасибо! Но Шевроле в своем репертуаре. Чтобы поменять лампочку надо открутить фонарь. ))) Задрачивает если честно. На экспрессе с задними лампочками как и на тахе надо снять фонарь. Инженеры!!! Ауууу!!!!)))))
What bulb socket are those? HB3 /HB4 ? thanks
There are THREE attach points to the headlight assembly; the two that you removed AND one inside the fender well, which you probably broke pulling on the assembly.
Does this work for replacing the daytime running lights or just high and low beam?
@jrsneons
3 жыл бұрын
both.
@JahsonnM313
3 жыл бұрын
Both just replaced my low beam driver side.
Да брат, болт сбоку фары не ослаблял? Думаю креплению кранты
Where were you when I needed someone to help me with doing my 07 headlights. Low beams. The dealership I went to did it wrong. They forced the headlights housing in wrong, and the bulb wasn't even in properly. And they wanted to charge me for their wrongful work.
Folks there is a bolt that you can get to by going in the driver side Tire well and loosen it about five turns without fully removing the bolt
I see he did both
Lmao Me and my dad broke one of the studs that gets pushed in already