√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@neuideals588

3 жыл бұрын

I noticed some serious damage to the bearing at 4:30. Was the due to wear or using the press?

I appreciate that you are using the old bearing instead of a fancy press with proper adapters. Not everyone has the right tool available!

@TRQ

3 жыл бұрын

+Benjamin Lagace Thanks for watching our video! 1aau.to/m/Shop-TRQ

Great video, I have no issue with paying my mechanic to do the work.

You guys don’t get enough credit. I buy a lot of Mazda parts from you guys and you guys are amazing. Videos are definitely the best too

@TRQ

3 жыл бұрын

+Kwon Orange Thanks for the feedback, we greatly appreciate your business! 1aau.to/m/Shop-TRQ

Best video on youtube for replacing wheel bearings.Should have many more views !. Thanks for laying out every detail for doing this job, especially the the press work.Thanks again !!

I used this video as a guide for my hub/bearing replacement.. excellent man! I wish my bearing would have came out as easy as yours! I had to douse it with PB Blaster until it gave up!

@TRQ

3 жыл бұрын

+Benji Mann Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ

The crowbar tricks to lock the wheel is a great idea but it ruins the threads of the studs, use a screwdriver through the caliper to the inside of the vented brake disk! It's a wayyyy better way. We did exactly as you did on the first side and we damaged the threads on a stud and need to replace it

Great video. It must be nice to have such rust free parts to work with. Just getting the rotor off was almost impossible on these vehicles if they are rusted. You literally need a sledgehammer to do it if its rusted on.

@GuitarGuy650

Жыл бұрын

You gonna cry?

Just gave that like button a loving bonk. Great video.

Thanks for the video, loving bonks cures everything :)

Video looks great!! Thank you for using a torque wrench and sharing the torque specs!!

Let's continue on replacing this bearing so we can continue on driving! 😊 Great informative video!

@TRQ

8 ай бұрын

+sch1181 Thanks for watching our video! 1aau.to/m/Shop-TRQ

Great video! Thank you! Quick question - how many tons is the press. I tried with 6 ton press and couldn't get the bearing nor the hub out.

Great job but those ball joints where toast. Would have been prime time to replace those...good video 📹

Such a nice video. Thank you! 🔥🔥

Great video well explained

Very good video for this procedure

Thanks. Very good instructions!

@TRQ

2 жыл бұрын

+Wojciech Gurak Thanks for watching our video! 1aau.to/m/Shop-TRQ

Good stuffs 👌 very informative 👍👍👍

Excellent video....!!!!!

Thanks man I followed your instructions and I did my front wheel bearing car is silent and smooth

@namwiththecam9960

2 жыл бұрын

You had all the press?

thumbs up!!! true shop do it all!! good job

Good vid !

You definitely had me at loving bonks.

Just got front wheel bearings for my 04 Mazda 3. The spec sheet in the box says to tq the axel nut to 39 ft lbs the go 90 degrees past that. So do I just do that or tq to the min tq at 172 ft lbs?

THANK YOU VERY MUCH . VIDEO VERY CLEAR

@TRQ

Жыл бұрын

+hung nguyen Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

Wow. This is quite the job. Of course I had the castle-nut spin with the stud in the tie rod ends. Such a pain in the ass.

I need the whole knuckle with the hub and bearings..do they sell it one deal.. I bent the part that held the caliper bracket on. How it bent the knuckle not sure

I def need to take my Mazda to mechanic cause this is a lot of work with tools that I do not have

do you press out the old bearing from the inner race?

wouldnt you grease the hub shaft before inserting dry into bearing assembly

Is the wheel hub, bearings, and spindle sold together already assembled so I don't have to do all the dismantling and pressing?

Ausome video 👍👍👍👍

Do you think a Diy can do it himself? I don't have a puller or a press

Hello, is it a must I replace the the hub as well? It seems to me that it’s just a piece of metal with No moving parts. Could I reinstall the original hub?

@BiteSizedGamingPlays

Жыл бұрын

Yes you can reuse huv

Hello I have a question, can you use the old hub and replace just bearring? Thank you

@neuideals588

3 жыл бұрын

Yes you can. This is what was done in the video 👍🏻

@NathanShirley

Жыл бұрын

@@neuideals588 Oh it looked new to me...maybe he just cleaned it up?

Do these bearings not need greased before installation?

Thanks 👍

Well done !! Thank you for sharing ... :)

Does this Work on 09 Mazda 3 s hatch

what size of socket is required to remove the hub? 32mm?

@NewDemons666

Жыл бұрын

Yezzir

@jameslarson6798

Жыл бұрын

@@NewDemons666 what size is the inverted torq socket ?

I have reason to believe my bearing was replaced backwards. I have no speedometer or abs or blind spot monitor. Can I check If the bearing is backwards without disassembly?

Good work

"keep in mind it`s a small bolt and you don't want to break it, snug it up and torque it to 68lbs"

Assuming we have a press in our garage. 🙄

All i need to do is remove the wheel hub to put on new wheel studs, i dont want to remove the whole assembly.. is it possible to do without press

@TRQ

11 ай бұрын

+Jesse Osborn For this specific part, you will need to use a press when replacing the bearing.

God thats a lot of work.

i guess you really do need a press to do this job. I was hoping to be able to hammer old one out ?

@alexanderkilimann6244

2 жыл бұрын

Were you able to do it with a hammer?

I torqued the wheel bearing axle nut 4 times😂

Would it have killed you to say WHAT SIZE each bolt was when removing??

do it your selfers dont all have presses. oh boy

Why not replace the LCA as well??? Worried about a wheel bearing but not the control arm ball bearing that’s blown out. How comical.

Shit. Think I’ll just get a new car, this seems extensive

Did you guys steal this video from 1a auto