How to Replace Front Passenger CV Axle 09-14 Chevy Traverse
Автокөліктер мен көлік құралдары
Buy Now!
New CV Axle Shaft from 1AAuto.com 1aau.to/ia/1AACV00172
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 09, 10, 11, 12, 13, 14 Chevy Traverse
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oND/1AXAA00013
• Pry Bar 1aau.to/od5/1AXAA00020
• 13mm Wrench 1aau.to/oh5/1AXAA00010
• 21mm wrench
• 22mm Wrench
• 10mm Socket 1aau.to/oBq/1AXAA00017
• 13mm Socket 1aau.to/oGb/1AXAA00015
• 21mm Socket 1aau.to/ojw/1AXAA00043
• 22mm Socket 1aau.to/oa3/1AXAA00266
• 24mm Socket
• 34mm Socket 1aau.to/oo/1AAST00004
• Dead Blow Hammer 1aau.to/ogd/1AXAA00091
• Ratchet 1aau.to/oPm/1AXAA00016
• Socket Extensions 1aau.to/oGb/1AXAA00015
• Torque Wrench 1aau.to/ona/1AXAA00044
• Brake Parts Cleaner
• Bungee Cord
• Floor Jack 1aau.to/okj/1AXAA00068
• Hammer 1aau.to/ogd/1AXAA00091
• Jack Stands 1aau.to/okj/1AXAA00065
For More Info visit us at 1aau.to/h/asc/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 94
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
One of the best repair videos I've seen. Straight to the point, easy to follow, and good angles.
yep...i'll be doing this myself next week with your parts. our mechanic (good/honest guy) wants $686 +tax for both sides. Local auto parts is $105-145 per cv shaft....yours are $145/pair. It's a no brainer. Thanks, I watch all your videos to do my own repairs when possible.
Video you just showed on changing the axle shafts I want to thank you for you guys spending your time to show as I want to be mechanics anyway I think you and it was a real good instructions
@1AAuto
2 жыл бұрын
+Jerrel Holston Thanks for the feedback!
I dk why I love the breaker bar when someone breaks loose a tight torqued nut.. that sound too when he broke loose the axel nut but like the 32mm nut so awesome
Lil tip for diy'ers. Get a floor jack to push the rotor back up to the strut mount. Also clean and regrease your caliper slide bolts, and lubricate all the rubber parts of your suspension as well, cause u may as well while youre in there.
My boots are good and no grease leaking, but I’m getting a faint clicking from the left side as I coast around a right hand turn. The right just started the same thing. I’m also getting a wheel shake at various speeds, but have had the wheels balanced twice. Would replacing the axles fix this?
Just did this job and I just wanna say that if you dont have a 24mm a 15/16 works great for those spindle nuts, also for the lug nuts a 7/8 worked better the 22mm gets stuck on the chrome lug nuts
@robertmiddleton6112
2 жыл бұрын
Was there a seal in between the bearing and CV?
Very great video. Concise, well done, and thorough. The only thing I didn't like was having to re-use the metal washer. Why can't the new axle shaft just come with it on there? Also if it were mine I would have absolutely wiped the rust off it at a minimum.
@1AAuto
3 жыл бұрын
+JustinAlenScott Thanks for the feedback!
I didn't removed the brakes i just removed the screw attack of the brakes lines only is came out also 👍 good video thanks
I think he forgot to use loctite 242 for vibration it looks pretty clear applied on the bolts thread
Muchas muchas gracias saludos desde chile acá el repuesto para ese vehículo es muy escaso Gracias por el aporte solo me falta un detalle. Comprarme un elevador 😂😂
Loved the video. Very good quality as well.
@1AAuto
3 жыл бұрын
+Yes Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Great video! Thank you.
Great Video. Question? Im trying to diagnose why my traverse feels like it gets a bouncing/ up n down motion, only on the front right side on certain accelerations. If you let of the gas and re- accelerate it stops. It doesnt really do any whining or grinding? Any tips on where to begin to look?
Thank you.
@1AAuto
4 жыл бұрын
+Dustin Kile Thanks for checking us out! 1AAuto.com
Why leave the caliper hanger installed, just take it off with the brake caliper, remove the rotor and you have much more room to work. Beyond that, very good video
Is there a seal on the outside of that bearing?
Haha. Sounded like he said “I’m gonna torque deez nuts”. 😂😂😂
Where is transmission fluid?
What to do when the cv axle is frozes up in the hub. Been soaking it in pb blaster for 2 days. Cant budge the axle out of the hub.
Are there any major differences between the drivers side and passenger side cv axles? I watched both videos on your channel for this same car but on the drivers side.
@1AAuto
3 жыл бұрын
+Yes Thank you for watching! The driver side and passenger side axles are different for this vehicle.
Will this be the same process and parts for the 212 Buick Enclave?
@1AAuto
3 жыл бұрын
+Felipe Gonzalez Pachecano The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
I have a 2015 Chevrolet Traverse but can only find a video up to a 2014 Traverse. What is the difference?
Will u be able to do a video on this for a 2010 pontiac g6 .u have everything else but this
@1AAuto
5 жыл бұрын
+DeVon Mckinney We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application. Here is a link to the repair part that would fit your vehicle. Hope this helps you out: www.1aauto.com/2010-pontiac-g6-axles-and-axleshafts/y-mo-c/2010-1044-84
I want to ask you a question the brake cleaner doesn't mess up the brakes when you're spraying that on while the brakes are on?
@c.cintron3338
4 жыл бұрын
@Mr Hansen I think he meant if it ruins the finish on the wheel itself.
whats the metal wacher for
Do You need to do a 4 Wheel Alignment after replacing Axle Assembly ????
@1AAuto
5 жыл бұрын
+Victor Chico Andrade It's always good practice to get an alignment after installation of any axles or suspension parts.
@overthehandlebars
4 жыл бұрын
If you separate the lower ball joint instead of the strut it will not mess up the alignment
What are some known symptoms that will occur to know these need to be changed? I have a 2014 AWD that’s giving me a little shake from 2-3 gear. Any info is appreciated.
@1AAuto
5 жыл бұрын
+Andrew Cerda loud clicking noises, grease on tire edge, excessive vibration
Love your video but why not a arms too
Do you need a Wheel alignment after doing this repair?
@1AAuto
4 жыл бұрын
+Angel F We do recommend an alignment after replacing any suspension parts. Thanks for watching.
The strut mount turned out of the way and i cant get it back in place to attach everything back what do i do?
Will this procedure apply for a equinox 2005?
@1AAuto
4 жыл бұрын
+adrian monterrosa We do not have a video for this repair on that vehicle right now, but we'll keep this request in mind for a future video! 1AAuto.com
Do you if you can get it off by disconnecting just the lower ball joint & tie rod? I already changed the struts last year and I don't want to lose my alignment.
@1AAuto
3 жыл бұрын
+GRJ In MIA Thanks for watching! As long as you do not adjust any of the tie rods you should not lose the alignment.
is the same on a 2011 chevy impla LT
@1AAuto
5 жыл бұрын
We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application. Hope this helps you out +Robert Wagnon
Is this the same process for a 2014 GMC terrain?
@1AAuto
4 жыл бұрын
+Joseph Lawrence We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@richardbelliveau8881
4 жыл бұрын
I was going to ask the same about a 2011 Terrain lol
In a perfect world...but what if you have a stuck spindle?
@1AAuto
4 жыл бұрын
+Richard Vaughn Thanks for watching! You can spray some penetrating oil and hit with a hammer with either the nut like he shows or a piece of wood to protect the threads.
that vehichle didnt have abs?
@1AAuto
5 жыл бұрын
+BARRICADE GARAGE Thanks for watching. The vehicle did have the ABS sensor. If you watch at 5:40 he removes the sensor and at 13:14 you can see the ABS sensor is being plugged back in. Please let us know if you have any further questions, thank you!
I forgot the metal washer would it afrcted?
@joshuavargas2730
4 жыл бұрын
100Cofra i’m not 100% sure but you should probably be alright. i think that metal washer just prevents the axle from seizing up on the hub. and without it, it can make the next job a lot tougher getting it off
Ty
Do you have to re-align the vehicle afterwards? I'm pretty sure the answer is no but I'm hoping some more experienced mechanics can confirm this.
@1AAuto
3 жыл бұрын
+Jay C You shouldn't need to realign the vehicle after this repair.
@jay_c7
3 жыл бұрын
@@1AAuto perfect. I know since the struts were not touched they should technically be ok, but im glad you confirmed. Great video tutorial by the way. Its to the point and easy to follow. Definite thumbs up.
Mine was a little diferent it’s a 2014 chev traverse
Could you take the Axle nut off before you lift the car up or at least break the nut loose while the vehicle is still on the ground? That's what I do with the Wheel Lug nuts when I start anything in those areas.
@robertm1692
3 жыл бұрын
Yes you can. He took the wheel off to remove the center cap. But if you can get the center cap off first go ahead and loosen the axle nut before you do anything.
Same as a 2015? Or? I can’t find a video for that year
@1AAuto
3 жыл бұрын
+Moto Hunter These steps should be similar enough to complete this task:
How do you know what torque to set for the tightening of the axel bolt or any other bolt?
@1AAuto
6 жыл бұрын
+Bimmer Boy Any repair manual should have those specs if they are needed. There are a lot of forums on the internet that have a lot of information regarding torque specs as well! 1aauto.com
You hammered the new Axle without putting the nut am i right?!
Why take the brake off?
the seal is leaking, must be replaced
Okay so will this be done the same way on a 2012 gmc terrain?
@1AAuto
5 жыл бұрын
We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application.
0:29 that tire looks a little low don't it lol ??
why do you guys never use air tools? or battery powered tools? We all know it can be done with hand tools, here in Chicago we would not do most jobs without them.
@1AAuto
6 жыл бұрын
+TheOutwiththeold We do sometimes.
2002satern
How far flush does it go back
Why is it that you guys don't use power tools to remove wheel studs and axle nuts??? Or do y'all use them 1st then go back to record with hand tools????
@1AAuto
6 жыл бұрын
+Kelvin Lewis Sometimes we do. We try to keep our repairs as simple as possible keeping what the customer may have access to in their garage in mind. Hope this helps you out. 1aauto.com
Why not put new washers on the new parts
@1AAuto
4 жыл бұрын
+BRIAN THOMPSON Thanks for checking us out! New washers are not necessary for the installation of this item.
@blesdavis7637
2 жыл бұрын
I forgot to put mines on ooops
Selling for 130 years and still cant get it right.
Omg I work on commission and this guy just makes me anxious , have u heard about air tools ? I mean u have a lift so I think would be a good investment and time saver to have an air compressor and air tools
@jasonspellich2440
2 жыл бұрын
The point is most people don't, so they show how to do it with common tools...
very painful to watch
Locking pin should rest with the openning facing up ( 12 🕧 )