How to Replace Front Brakes 2011-2014 Hyundai Sonata
Автокөліктер мен көлік құралдары
Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1APBS00706
This video shows you how to install new, quality TRQ brake pads and rotors on your 2011-2014 Hyundai Sonata. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata
Tools you will need:
• Impact Screwdriver 1aau.to/obI/1AXAA00047
• Pry Bar 1aau.to/oQq/1AXAA00020
• 14mm Socket 1aau.to/obk3/1AXAA00015
• 17mm Socket 1aau.to/obk3/1AXAA00015
• 21mm Socket 1aau.to/oabZ/1AXAA00043
• 1/2 Inch Impact Gun 1aau.to/org/1AXAA00252
• 3/8 Inch Impact Gun
• Torque Wrench 1aau.to/oayu/1AXAA00044
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• sanding disc
• Hammer 1aau.to/oRs/1AXAA00091
• Punch
• Wire Brush 1aau.to/orZ/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Hyundai Sonata 2011-14 6th Gen: • Hyundai Sonata 2011-14...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 12
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
Thank you for this very helpful step by step video! You even included socket sizes and torque specs. I have been putting this off for a month because I am at the age that I no longer have any desire to work on my own stuff anymore but couldn't bring myself to pay twice what I did to have it done. Took two and a half hours of back and for forth and searching for equipment to do the one side and like 15 minutes to do the other lol.
Really good video. Did the rear brakes recently which were an absolute pain since Hyundai engineers put one of the calliper bracket bolts in the worst position possible. The front brakes look a lot simpler to do, and after watching this refresher, I should be able to get this job done tmrw!
Great job! Perfect directions, best on the internet!
Great video. One of the best I’ve seen on KZread for any mechanical work! Will subscribe. Thanks
Great video! I am going to watch it again as I change my brakes, step by step.
Outstanding video! Informative and explained clearly.
Thank you so much for the help
God bless you
Do you have to crack the bleeder to compress the piston? Can I just compress it without cracking the bleeder, and potentially introducing air into the system and then having to bleed all the brakes?
Good video, but you never showed how you removed the stripped bolts holding the rotor. If that happened to a DIY guy most of them gonna get stuck. Also i wouldn’t open the brake valve since you can induce air in the system and you are having mess under even if you use a pan. Anyway you should replace the brake fluid when changing the brakes.
You sprayed brake cleaner into the wheel bearing hub, ... not a good idea, probbly wash dry the wheel bearing grease