How to Replace Front Brakes 2007-2017 Jeep Compass
Автокөліктер мен көлік құралдары
Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ib/1APB...
This video shows you how to install new, quality TRQ brake pads and rotors on your 2007-2017 Jeep Compass. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2007 Jeep Compass
2008 Jeep Compass
2009 Jeep Compass
2010 Jeep Compass
2011 Jeep Compass
2012 Jeep Compass
2013 Jeep Compass
2014 Jeep Compass
2015 Jeep Compass
2016 Jeep Compass
2017 Jeep Compass
Tools you will need:
• Pry Bar 1aau.to/oHJ/1AX...
• 8mm Wrench 1aau.to/oge/1AX...
• 14mm Socket 1aau.to/oaZ2/1A...
• 18mm Socket 1aau.to/oZv/1AX...
• 19mm Socket 1aau.to/oZv/1AX...
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/o4/1AXA...
• Brake Caliper Hanger 1aau.to/ogh/1AX...
• Torque Wrench 1aau.to/oajN/1A...
• Brake Fluid
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Wire Brush 1aau.to/opB/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 21
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
Every thing was good except the bleeder part to tuck in the caliper dont do that at home leave the bleeder closed and just push the piston
Maybe I’m doing brake jobs wrong but I’ve never bled it while pushing a piston back in. 🤔
Best presentation I've ever seen. Thank you for sharing your skill.
She was pretty informative. Well made diy video
This does not have enough views, great video! I’d trust you with my car!
Parabéns. Simples e intuitivo.
Un exito. Quedo excelente. No segui lo del cambio del liquido de frenos No se lo saqur. Aun asi quedo excelente.
Very informative. Thanks
You used both a flat head and caliper press tool what’s the reason for taking the bleeder off and bleeding the system ahain
You said someone's been there before so how do you know for sure where the indicator and the bushed pin goes?
Great video!
Great job lady I’m impressed
@TRQ
5 ай бұрын
+@mrnic3guy305 Thanks for watching our video! 1aau.to/m/Shop-TRQ
Brother those tools are so fucking beautiful I want them
Rotors usually never come off that easy
They put silicone rtv because the brake rattles. I know the fix for the rattle problem without using silicone. 100% effective
this mecanic is slightly goofy, but overall it's okay
My bracket is held in with different bolts and of course Samson himself couldn't loosen them
This chick sounds like Sue from Life Below Zero lmao
No, but a lot of unnecessary steps