How to Replace Exterior Front Door Handle 2008-2013 Nissan Rogue
Автокөліктер мен көлік құралдары
Buy Now!
New Exterior Door Handle from 1AAuto.com 1aau.to/ia/1ADHE01135
This video shows you how to install a new TRQ door handle on your 2008-2013 Nissan Rogue. Door handles, especially the driver side, withstand daily abuse. It’s no wonder one might wear out or even break off eventually. TRQ door handles are precision engineered to fit your vehicle perfectly.
This repair was done on a 2009 Nissan Rogue S 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• 10mm Socket 1aau.to/oa75/1AXAA00017
• Trim Tool Set 1aau.to/o9B/1AXXX00006
• T30 Driver
• Ratchet 1aau.to/obyL/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/obrQ/1AXAA00015
• Gloves 1aau.to/o2H/1AXSS00048
• Safety Glasses
• Pick 1aau.to/oNn/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Nissan Rogue 2008-13 1st Generation: • Nissan Rogue 2008-13 1...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 29
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
What a great video! I'm retired and on a fixed income- you helped me save a couple of hundred bucks. Your step by step (and articulate) presentation was easy to follow.
What a great and detail video. Good job. I don't need a mechanic thank you.
This was a perfect tutorial! I replaced it and put everything back together in less than an hour! Saved me a lot of money!
Great video, but you’ve shown me that it’s most likely best, if I have my service shop replace my door handle that’s only cracked so far. In my younger days, I’d probably go for it. Thanks for the show!
Thank you very much. My handle just broke today. I feel confident I can accomplish this on Saturday.
99% perfect video. That yellow clip took more work than you showed lol. 99 aint bad. Thanks!
Great video. Very informative. Someone broke into my daughter's Nissan Rogue and broke her door handle in the process. Can I bring it to you for repair? 😮
Thank you so much for this; saved me money i really don't have rn.
Thanks for this video.
thank you very much for the guidance and knowledge!
Thanks, just last night, my door latch would not open the door. Watching this video I think the rod from the handle disconnected from the yellow piece. Is the suction cups just a precaution?
One of the best DIY video I have seen. Thanks. I have managed to change plenty of parts with your videos. Keep up the good work
I need to replace passenger front handle. Can’t find any videos to help. I’ve got the dang thing opened up but can’t figure out how to clip the new handle in. Plenty of videos for driver door.
Worked well for my driver door handle replacement. Some difficulties we had involved re-aligning the bolt holes for the door panel with the window arm. I got a "compatible" handle and it isn't gliding in and out as readily but it functions.
is this what I need to do then long story short the outslide driver side door wont open from the outside, but CAN open on the inside using the other handle/latch, i heard a clip or something fall out prior will I need to go this route to reattach whatever got loose etc? thanks!
Thank you for the video I don’t know how I managed to break my door handle off but I did lol on my 2012 Nissan rogue
🎉 THANK YOU SO MUCH. Because of your video it just made my job simple and I appreciate you so much. Now I'll go subscribe lol
Excelente, muy detallado y con todos los pasos que necesita alguien que nunca lo ha hecho, gracias
What a great video! I cant wait to fix my door for a fraction of the $500 the shop wanted.
Good video thanks I did exactly what you showed. Super easy
All the cables for the sensor are not mention, do you have any video or steps about it? My sensor wires are broken
Thanks much for sharing this...i knocked it out in a quick 30 mins!
THANKS GREAT JOB
Mine snapped in half, I have to pull the side that’s next to the lock on a angle to open, I hope I can find a metal replacement not plastic
What does the handle attach onto?
You made it way too hard. Many unnecessary steps.
This it's not for a 2011 rogue 🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬