Thanks mate. I did it. followed your instructions all done less than 30 min ✅

@crediblemike7266

2 ай бұрын

Thanks for watching. I am happy yet surprised that you not only found this video but also found it to be useful. The feeling is great and it's for this reason why I did this video...to help others. Thanks for the feedback. Cheers mate👍

Thanks buddy. Exactly what I needed.

@crediblemike7266

8 ай бұрын

Thanks for watching. I am happy that this video offered you exactly what you needed,👍

Thank you so much. I had the exact problem today

@crediblemike7266

9 ай бұрын

Thanks for watching. You are most welcome

Mate, your a legend, the locking mechanism part had me stumped until i found this video. Kudos from downunder

@crediblemike7266

Жыл бұрын

Thank you mate. I did this video with the hope that it would help someone to solve this very problem that you were facing. And based on the fact that it was of great help to you, I am very happy that I took the time to record and post this video. Thanks for watching. Much appreciated!

OH MAN, you should voice all the tutorial videos!

@crediblemike7266

2 жыл бұрын

Working on it!

Thanks mate, legend! Have just followed your instructions and got the door handle changed! Thanks again

@crediblemike7266

Жыл бұрын

Thanks for watching and I am very happy that you were able to change your door handle. Awesome!!!!

Awesome video

@crediblemike7266

Жыл бұрын

Thanks for watching and thanks for your positive feedback.

@JT-152

Жыл бұрын

@@crediblemike7266I am going to be changing the rear door handle in a few days, only concern i have is removing the last bolt at the back of the handle and it falling inside of the door frame… Does it completely have to be removed, or just loosened and can stay in the door while removing the handle? Thanks again

@crediblemike7266

Жыл бұрын

As long as the hex socket fits perfectly in the bolt it will not fall into the door and even if it does the door is built in such a manner that you can easily reach the bolt. All that would be required if you is to partially remove the plastic and use a light to look for the bolt or feel around until you find it. The bolt MUST be removed in order for you to replace the handle. Don't worry about it too much because with a bit of patience you'll realize how easy a task it is. Best wishes.

@JT-152

Жыл бұрын

@@crediblemike7266 Done this afternoon, great success thanks to your video. The hardest part was moving the lock assembly out of the way to access the bolt, as it couldn’t be moved a lot, i was only just able to access the bolt. 👍🏽💯

@crediblemike7266

Жыл бұрын

I am happy that you were able to get the desired results. Yes, access is a bit difficult to remove the hex bolt otherwise it's pretty straightforward

Thank you. A great video and took us about 30 mins. Perfect instruction

@crediblemike7266

3 жыл бұрын

Happy that you found and benefitted from this video. KZread is a community for sharing and helping each other so I feel honored to be of help and service to my fellow man. Thank you for your feedback

Thanks alot

@crediblemike7266

50 минут бұрын

Thanks for watching and for your feedback. I am amazed that this video is still proving to be helpful

Muchas gracias desde Barcelona!! Instrucciones perfectas para cambiar la maneta !!

@crediblemike7266

Жыл бұрын

Muchas gracias. Me alegro haberte sido de ayuda.,,👍🙏

Thank You for this tutorial. Very big help.

@crediblemike7266

3 жыл бұрын

Thank you for having watched this video. I am especially happy that it was of help to you. As long as we continue to be of help to each other we will make this world a much better place.

Great video and thanks. Very quick and informative process.

@crediblemike7266

Жыл бұрын

You are most welcome my friend. I am happy that you found it to be beneficial.

@MrHSVGTS300

Жыл бұрын

It took less than 20 minutes. Easy job. I did a video on the install of a aftermarket Bluetooth DVD player and blower motor/cabin filter change. Upper rear tail light is a common fault too. If you change your CV boots it would be great to do a video on that as that is common as too.

@crediblemike7266

Жыл бұрын

Again thanks for the feedback. It's great being a part of the KZread community whereby we can put out content that can be of benefit to other individuals. It's actually gives me an awesome feeling whenever someone acknowledge that a video did I didn't helped them. That's what it's all about. One helping the other👍

Thanks, this is a big help. I had the door trim off but had no idea what to do after that.

@crediblemike7266

3 жыл бұрын

Happy to have helped!!

Thanks for the information.I am from Trinidad and the company do not have it..i will have to try elsewhere .

@crediblemike7266

2 жыл бұрын

Sorry to hear... If you know of anyone who is in Jamaica you probably could ask them to make the purchase for you at Fidelity or Berts Auto Parts Store. I honestly believe that dealerships are creating an artificial shortage of parts by not making certain parts readily available for non dealership vehicles. Part have to be custom order with greater frequency these days which tend to cost more. I cannot confirm this however in Jamaica it is said that dealerships will sometimes have parts in stock but only for the vehicles that they service. This seems plausible to me.

@crediblemike7266

2 жыл бұрын

Interestingly, both the left front and left rear door handles broke on separate occasions...with a little ingenuity I was able to repair both and they functioned quite normal...it was not easy to figure out how to do the repairs, however it can be done.

Where can I get a new door handle for the Nissan Xtrail?

@crediblemike7266

2 жыл бұрын

They are sold on Amazon as well as eBay. Typically these days you need to have your vehicle's VIN number which will ensure that you get the right part that fits your vehicle. Your local dealership/auto parts store should also stock that part. Hope this helps.

Do the rear and front doorhandles interchaqnge

@crediblemike7266

2 жыл бұрын

Unfortunately no...the door handle design for the front door is different than that for the rear.

This video is not a true representation on how to do it It is very difficult to get the screw in the small part. It is also hard to get the lock back in position to do the 3 screws Up.. Dont attempt this if you are not very competent with this sort of thing...

@crediblemike7266

2 жыл бұрын

This video simply demonstrate how I was able to replace the lock. As with all videos done by d.i.yers (with or without disclaimer) it's up to each individual to determine based on their skill set whether they would want to undertake such a challenge. No claim was made to give the impression that it is an task, yet difficult does not mean impossible. KZread is a medium that allows individuals to learn, and develop the confidence to do things that would not have undertaken by themselves. I appreciate your disclaimer given; it's not the easiest fix. It might not even be the "right way" to get the job done. Nonetheless, KZread is a medium that offers others the opportunity to view how things can be done (professionally or non professionally), so once the content is not harmful nor will create further damage and incur additional expenses then I say "go for it". Too many of us a held back by fear. Too many of us have held back ourselves because we think that something is too difficult or have been told that it is too difficult. So I encourage persons to challenge and to try things for yourself because obstacles can be overcome. "Live and learn" because we all came point of non knowing at some point in our lives. I wish that persons will driven by results and feel the joy of accomplishment a task. Full competence will come with time.