Great tutorial!! I am so glad I watched this before we installed our handle. It was still a bit difficult, but we managed through. Thanks for posting this!

@LanceLotSpot

Жыл бұрын

You very welcome

Thanks for the video fellas. I knew it was going to be a little bit of a job but not quite this much. Ha ha!! Good times right? 😀All in a quick days work I suppose. Someone prior to me replaced the keyless entry handle with a standard handle. Now my wife insists on having the keyless handle back on instead. I appreciate ya boys and your time it took to make this video! Great to the point video. Take care and be safe out there.

@LanceLotSpot

8 ай бұрын

Thank you we appreciate the gratitude and support. Very happy the video helped you. Have a wonderful day as well

Upside-down or backwards, this was really helpful. I'm doing this tomorrow and I thank you for taking the time to make this. All the best, mate!

@LanceLotSpot

Жыл бұрын

Thank you

I appreciate the video, gonna tackle it this weekend.

Thanks for this. Very helpful.

This video is very informative. It's very easy to follow and understand. I followed along and had my car door handle fixed in no time. It does take a little bit to fit the handle/lock together and definitely needs 2 people to reinstall the inside panel to the window arms, but definitely doable! 10/10

@LanceLotSpot

3 жыл бұрын

Thank you 💕

This is an excellent video for anyone who has electric components on their door handles. If you do not have electric components, then you do not need to remove the inside panel. You just need to do the steps seen at 7:11-8:45. This will allow you to move the lock around and get the new handle in there. Then just screw it all back in and you're done. It takes 5 minutes at best! There are videos that show these steps in better detail. Happy Repairing!

@LanceLotSpot

2 жыл бұрын

You right bro. Thank you

@ninjabuck2576

2 жыл бұрын

@@LanceLotSpot Excellent video, BTW. I watched all of it and was ready to go before I realized I didn't have the electric part. If I did, I'm sure this would be the best vid to watch.

@LanceLotSpot

2 жыл бұрын

@@ninjabuck2576 Cool you have a more simple design Rogue. Electronics have so much flaws and harder to repair. Again thanks for mentioning it. We help each other

Many Thanks, could not have figured this out without your video!

@LanceLotSpot

3 жыл бұрын

Thank you for the great comment 😊. Please subscribe

This was super useful, thanks! Made us realize we likely need help to do, are you in Philly? If interested in assisting (we can pay and bring hoagies), let us know how to contact you! ;-) else, we are going to try to find someone honest and affordable with tools. That window issue plus the drama of plugs/wires really does need someone handy with car trim repair. Very useful to see the whole process. Thank you both!

@LanceLotSpot

Жыл бұрын

Hello there. I'm greatful to have help you with this video. Yes I'm close to philly, I'm right in Darby, PA. You can bring it to me on The weekend. If you have instagram or Facebook we can talk there. My Instagram ldwautostar and FB Lance Williams. I'm looking forward to it. Thanks for The chance

Not able to see details to get through some tough spots, and just like magic, it was done.

@LanceLotSpot

Жыл бұрын

The video was tough to record with limited room but I can help you. What tough spots are you in?

Thank you fellas you all just save me a lot of time thank you so much

@LanceLotSpot

2 жыл бұрын

You welcome bro. Makes me happy this video is helping people

Thanks for posting this. Im getting ready to do this job very soon. Yall probably madd the best video on the topic cause there are not very many videos about this job.

@LanceLotSpot

7 ай бұрын

You welcome and i wish you a easy process.Happy holidays too

@bricegraham8256

7 ай бұрын

@LanceLotSpot I knocked it out the same day I made the comment. I wanna say it took about an hour or so to get it done. The hardest part, just like you said in the video was lining up the door handle. The old one was already completely broken and fell out upon me just pulling on it lol.

@LanceLotSpot

7 ай бұрын

@@bricegraham8256 Sweet! and bravo on a great first attempt. Thanks for updating me and others on here. Glad it worked out

@bricegraham8256

7 ай бұрын

@LanceLotSpot Thanks man, and thanks again for the great info provided

@LanceLotSpot

7 ай бұрын

@@bricegraham8256 No problem:)

Great video, fellas!

Thank you for this video! I couldn't have done it with y'all.

@LanceLotSpot

Жыл бұрын

You very much welcome. Happy it helped

@Austin Middleton, I'm sorry I saw your message but for some reason I can't reply to it directly. If the handle button doesn't work, try the other door handle buttons to see if they work. If not then you might have to try resetting the battery but if they do then make sure you connected the harness for that door handle and it's tightly connected and everything is put in place as it should look. Should fix it

excellent!

Good stuff

You could avoid all that work by just unscrewing the screw at the back of door handle and take out the button and just change handle itself but if you want to change both the handle and button then you could do what he’s showing you but that’s what I did on mine today and it was much easier and faster.

@joshclark9913

2 жыл бұрын

Jordanetheone!!! Bro, thanks for commenting! Saved me so much time!

@jeffbuttars2763

2 жыл бұрын

@jordanetheeone YOU are a REAL Man of GENIUS!! Seriously! It took me 4 times reading your comment to finally understand what you are saying. So I was thinking yeah I could get the old door handle out but I couldn't get to the electrical socket to undo. I am going to have to take the door panels off. Then "click", your words came to mind, leave the existing electrical line/button connected. Unscrew the back of the new and old handles and put the old electrical line into the new door handle. My handle was the issue not the keyless entry button. Job completed! Major thanks!

@jamesmangogna8191

2 жыл бұрын

Is it just one screw to disconnect the button from the old handle and connect it to the new?

@BoozhiOfficial

2 жыл бұрын

Thanks for the video guys! And thanks for this comment! There is a trick to this bolt in the side of the door (9:00 in the vid). It can not come out after you've loosened it so no issue with it falling in the door, but it does have to be pulled out to it's furthest extent for the rear fascia piece of the door handle to come out. I used a little super glue on the end of the bit. I spent a good 10 minutes trying to get it out because I didn't want to lose the bolt in the door, but once it is loose/pulled out enough, that piece of the door handle should come out very easily. Then, pop in the main piece of the handle and slide it forward to catch on the latch, add the small peice, then screw it in and you're done!

@CardiffGiant

Жыл бұрын

thanks for the tip. i literaly have the new handle sitting next to me after it arrived today and was dreading the whole having to loosen the window regulator and hold or clamp the glass. seeing it’s one screw to separate the new handle body from button assembly that seems like the way to go

Ima try just removing that side screw lol

Thank you for the video!

Hey bro. How did you put the right side of the handle in along with the key part. What goes in first. Mine is stuck and idk if to hit it in or not

@LanceLotSpot

3 жыл бұрын

Hi bro. Don't hit it in if it's stuck so you don't damage the part. Take it out unscrew the inner piece that the door handle goes in and try again. It's been a while since I did this with my buddy but basically the inner piece has to be loose while you put or push the door handle in it. It's a lot of wiggling and pushing but don't hit it. Once it's fitted in the inner piece then you can screw it. Hope this helps and if I get any other info I will share it with you

Another video I watched, the door handle can be replaced without taking the interior door panel off.

@LanceLotSpot

3 жыл бұрын

Nice, thanks for the tip🙂

Mine cracked in that same spot twice. They def didn't make sure it'll last.

Thanks, learned a lot but there is a much easier way to replace without removing the panels.

@LanceLotSpot

Жыл бұрын

Thanks and please explain for me and others on here how to do it that way.

@leeaffel9570

Жыл бұрын

@@LanceLotSpot Sure. With the old handle hanging off, take some locking pliers and attach to the exposed wire so it doesn't fall back into the hole. Remove the screw from the back of the handle and remove the cover exposing the wires, the back of the button and a small box. Carefully pull out the button and the box ( which is only secured with tape or a sticky pad.) Remove the same items from the new handle. Take the new handle and attach the old button and small box and replace the cover. Then you have to loosen the screw inside the door (which you guys did a great job explaining) which will loosen the lock part and provide room to install the new handle. Reinsert the lock and tighten the screw. As good as new unless you really care about having a new button which I didn't.

@LanceLotSpot

Жыл бұрын

@@leeaffel9570 Thanks a bunch. This is another simple method to solve the problem.

Can you provide me with the part number for the door handle? To make sure I get the same one bc the door handle just broke the same way the old one was

@LanceLotSpot

3 жыл бұрын

Hey thanks for the message. I bought the part on eBay. The eBay part numbers are 80640-CZ31B, 80645-CA000, 80640CZ31B, 8064CA000..The EBay item number is 164133885220.. Hopefully that helps you. Its a complicated replacement. Good luck

@albaflores8688

3 жыл бұрын

@@LanceLotSpot can you lmk how you put the handle? Like was it just put it place? Or was it hooked on to something? Lol sorry I’m working on it rn and I’m having some trouble and this is probably the most step by step video I found

@LanceLotSpot

3 жыл бұрын

@@albaflores8688 it was just put in place along with the key entry portion at the same time for you to tighten that philip screw in the hole. Just have to connect the power connection in the door card/panel. I wish I had better camera angles. But the space is so tight. Try to get a helping hand to make it a little easier. Doing it alone will be much tougher. Best of luck

there is a clip that holds the bolt inside the door that stops the bolt/screw from coming all the way out- this stops it from falling - I hope this is not a customer car with these two starching the paint with metal tooling

@LanceLotSpot

3 жыл бұрын

It was our car. Thanks for your comment. Next time we will be more careful getting the job done

My handle quit working today, Im hoping the cable just needs reset.

@LanceLotSpot

3 жыл бұрын

I hope so too so you don't have to replace the whole thing.

@11Stucat

3 жыл бұрын

@@LanceLotSpot Thanks for the video kept it simple. Ill try it out in a few days, weather turned cold here.

@LanceLotSpot

3 жыл бұрын

@@11Stucat you welcome. Winter makes things difficult but good luck with it

as I installed a DS door handle back as a replacement in june of 2021- the replacement handle just snap apart - oct 2021 - these plastic handles are no good- I am thinking of contacting a friend who has a machine shop with a CM/milling machine - I think I am going to have a handle designed and made out of a solid block of high grade aircraft aluminum - as I have study the handle and engineering process design, the handle by the way its designed is a flawed design by Nissan-

@LanceLotSpot

2 жыл бұрын

Definitely agree its a poor quality on Nissan. Your idea can work when engineered to spec. Maybe you can sell that product in the market for people to get it and prevent this type of problem in the future. Thanks for your idea too:)

these handles that Nissan puts on have a structural defect in the quality- this happens to a lot of different Nissan- it should actually be on the oem as a known replacement under warranty - TSB for a recall - - everyone that replaces these handles should file complaints against Nissan on this - BOA- bureau of automotive repair

@LanceLotSpot

3 жыл бұрын

I 100% agree. Thanks for the info

@DjPorkchop73

8 ай бұрын

Same issue with the kia Sorentos. The handles (and the rest of the car as well) are pure garbage and break and or just pull out so very easily. Quality just isn't there anymore like it used to be back in the day.

camera man u did hurt my eyes !

Yall really recorded upside down😭 i was so confused at first

You guys scratched that car all up! And totally messed up that hole around the torx... yikes.

@LanceLotSpot

3 жыл бұрын

We did what we could to fix the problem

@dattracta

3 жыл бұрын

@@LanceLotSpot I mean, I did the handle in my ladies rogue by myself and didn’t damage her sheet metal!

piece of junck far over engineer in the wrong way anyway thanks for the video

@LanceLotSpot

3 жыл бұрын

Really is and you welcome

I hate these handles so much

@LanceLotSpot

3 жыл бұрын

Yeah I agree

@Coleschonfielddd

3 жыл бұрын

@@LanceLotSpot solutions 15lbs fishing line on the joint

@Coleschonfielddd

3 жыл бұрын

@@LanceLotSpot y'know in case it breaks

Nissan Rogues are GARBAGE!!! 👎🏻

@LanceLotSpot

2 жыл бұрын

I hear that. I just started working at a Nissan dealership and i see all the reasons why people hate them.