How to Replace Door Latch & Lock Actuator 13-18 Subaru Forester
Автокөліктер мен көлік құралдары
Shop for New Auto Parts at 1AAuto.com 1aau.to/c/21/at/power-door-loc...
In the video, 1A Auto shows how to remove and replace a broken, rusty or stuck door latch. The video is applicable to the 13, 14, 15, 16, 17, 18 Subaru Forester.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/owd/1AXAA00013
• Phillips Head Screwdriver 1aau.to/owd/1AXAA00013
• 10mm Socket 1aau.to/opr/1AXAA00017
• Trim Tool Set 1aau.to/odV/1AXXX00004
• Ratchet 1aau.to/owz/1AXAA00016
For More Info visit us at 1aau.to/h/bGD/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 30
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
Fairly good video. As others have pointed out. The one BIG thing missing is "to make sure the 4 inch rod from behind the key to the new lock, is placed in the spot for it as you are putting in the new lock. Otherwise the actual key will NOT do anything. These are very hard to get the rod in the right spot, but vital for the key to work.
Got the lock replaced couldn’t of done it without you all the helpful tips got it done on my 2020 Impreza subscribed and thank you thank you!
Have to say I watched the video twice, had my door fixed in 18 minutes. Knowing where everything was and what needed to be unplugged was priceless. Saved me so much on a repair I did myself. Thanks again
Thanks for the video! Saved me a ton of money. Just like one of the other commenters, I ran into the issue that I could not get my key to manually turn and lock and unlock the door. If this happens to you, there is a rod coming straight back from where the key goes in, and it has to fit into the top of the new unit you're installing. It took 20 minutes of me moving it around and shimmying it in from different angles before I finally got it to fit properly. Definitely make sure your key can lock or unlock it. If not, when the battery is dead you're SOL.
@1AAuto
3 жыл бұрын
+calathan Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Excellent video! Everything fully explained, and the visuals were perfect! Thank you for sharing your expertise
Watched this twice, doing my 15 ltd this afternoon. Thanks for the video instructions.
Great video. Taking the time to point our the color of the wires, etc. made it so much more useful. Found the part on Ebay (couldn't find anywhere else) and was able to make it work. Would highly recommend getting something resembling the 'pick' used in the video to remove the wiring (and don't start the project without a socket set like I did). I actually never fully removed the door panel because I could never get the left-most clump of wires undone.
@1AAuto
5 ай бұрын
+@timothysheehan4820 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Haha, at (9:14) "Aaaand then we'll give the rod a little tug. Feels pretty great!"..., lol... Good ol' D & fart references never get old, do they?
Excellent video... best one , very clear and informative. Very well done. Thank you.
Working fine now. Thanks. Forester 2008
Will this allow me to get thru a rear door with this video? No key entry to worry about?
Ran into an issue getting the rod in the proper placement to go back into the area with the yellow clip. The metal rod has to be on the other side of the window railing when putting the new unit back in (behind the railing). If the rod is on the same side as the electronics (in front of the railing) it pushes against the rail and doesn't allow enough movement to clip in. I was doing this out in the sunlight so maybe in a shop with proper lighting it would be more obvious, but it took me a bit to figure out the trouble.
@calathan
3 жыл бұрын
This happened to me too and after thinking about it, it makes sense, but wasn't obvious at first.
missing the link to the actual replacement part cant seem to find it on your website
Great video, and responses. Now... if you could only find and purchase the item from the website! There should be a direct link for the actuator. Tried to use every word possible to describe the item, nothing recognized.
@1AAuto
3 ай бұрын
+@user-xv2fx3iz8i Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Good video. I have a Legacy and the driver’s door won’t open at all. Is it as straightforward to follow these steps?
@1AAuto
2 жыл бұрын
+TheRonaldbaxter We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
very good video sadly mine a 2009
:22
My key dosent lock or unlock the car now
@1AAuto
4 жыл бұрын
+Oscar Gonzalez Thanks for watching. You may want to see if the issue with this is the lock cylinder not allowing it to activate properly.
@truche132
4 жыл бұрын
@@1AAuto thank you, I figure it out, the cylinder has to connect to the actuator in the back, it works great now,a thanks you!
@1AAuto
4 жыл бұрын
+Oscar Gonzalez Thanks for checking us out! 1AAuto.com
30 minutes or less, my wife and I just finishes it
@1AAuto
3 жыл бұрын
+Tyler Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Can't buy parts from you because of your web host.