Take the first three bolts out, and use a hammer to smash out the bushes. Saves a lot more time
@LeiMajorzАй бұрын
You made it look to easy. Thank You.
@ophiriannative63873 жыл бұрын
Thanks for the video. This will save me some money.
@emilmickael2 жыл бұрын
Good Job, really professional, simple works
@brandoncheng7302 жыл бұрын
請問這個零件有沒有左右之分 、多謝🙏
@rex_s805 жыл бұрын
What are the torque specs on those bolts?
@wetytbub
5 жыл бұрын
I think it's 50Nm +90° on the 2 smaller bolts and 70Nm +90° on the bigger bolt.
@rex_s80
5 жыл бұрын
ajcsessz that’s around to what I did. I’ll probably re-torque them this weekend to be sure
@wetytbub
5 жыл бұрын
@@rex_s80 what type of car do you have? I got the values from an mk6 golf manual.
@rex_s80
5 жыл бұрын
ajcsessz my sister has a 2011 VW Tiguan. I have a 99 Volvo S80. I work on my family’s cars for them. I just don’t know much about VW yet.
@wetytbub
5 жыл бұрын
@@rex_s80 workshop-manuals.com/volkswagen/ You'll find lots of good info, including torq values, etc... 😉
@muaazkabir73985 ай бұрын
How much NM should we torque them?
@mikec2867
5 ай бұрын
If you are replacing with new bolts the smaller bolts are 50nm +90⁰ turn, bigger bolt 70nm +180⁰ turn 👍 hope that helps
@roarhelle2 жыл бұрын
Theis is not be correct way of replacing this front bushing adapter....The front bushing is to be torqued when wishbone is under press. And also, noe should align the 18mm bolt to the subframe using alignment bolt to avoid re-alignment of Toe in/out. all Bolts should be replaced sine these Are stretch Bolts.... Bushings and Bolts Will probably wear out a lot faster now.
@riks8888
Жыл бұрын
This is exactly what my VW indy told me and hes being doing VAG cars for 40 years
@roarhelle
Жыл бұрын
@@riks8888 Sure, I am just referring to what the service manual says when it comes to torqueing wishbone bushings to make them last longer. Regarding alignment, there should not be any problems as long as one use the memory marks from the old one.
@neilg33643 жыл бұрын
No point torquing them bolts they've already been stretched
@RogueZebra83 Жыл бұрын
Dont use an extension when torquing the bolts to correct spec also bolts should be replaced in an ideal world
Пікірлер: 30
Take the first three bolts out, and use a hammer to smash out the bushes. Saves a lot more time
You made it look to easy. Thank You.
Thanks for the video. This will save me some money.
Good Job, really professional, simple works
請問這個零件有沒有左右之分 、多謝🙏
What are the torque specs on those bolts?
@wetytbub
5 жыл бұрын
I think it's 50Nm +90° on the 2 smaller bolts and 70Nm +90° on the bigger bolt.
@rex_s80
5 жыл бұрын
ajcsessz that’s around to what I did. I’ll probably re-torque them this weekend to be sure
@wetytbub
5 жыл бұрын
@@rex_s80 what type of car do you have? I got the values from an mk6 golf manual.
@rex_s80
5 жыл бұрын
ajcsessz my sister has a 2011 VW Tiguan. I have a 99 Volvo S80. I work on my family’s cars for them. I just don’t know much about VW yet.
@wetytbub
5 жыл бұрын
@@rex_s80 workshop-manuals.com/volkswagen/ You'll find lots of good info, including torq values, etc... 😉
How much NM should we torque them?
@mikec2867
5 ай бұрын
If you are replacing with new bolts the smaller bolts are 50nm +90⁰ turn, bigger bolt 70nm +180⁰ turn 👍 hope that helps
Theis is not be correct way of replacing this front bushing adapter....The front bushing is to be torqued when wishbone is under press. And also, noe should align the 18mm bolt to the subframe using alignment bolt to avoid re-alignment of Toe in/out. all Bolts should be replaced sine these Are stretch Bolts.... Bushings and Bolts Will probably wear out a lot faster now.
@riks8888
Жыл бұрын
This is exactly what my VW indy told me and hes being doing VAG cars for 40 years
@roarhelle
Жыл бұрын
@@riks8888 Sure, I am just referring to what the service manual says when it comes to torqueing wishbone bushings to make them last longer. Regarding alignment, there should not be any problems as long as one use the memory marks from the old one.
No point torquing them bolts they've already been stretched
Dont use an extension when torquing the bolts to correct spec also bolts should be replaced in an ideal world