How to Replace Brake Pads for Kawasaki Ninja 250
How to Replace Brake Pads: japan.webike.net/moto_news/how...
We're going to show you how to replace the brake pad from this Ninja 250.
Removing the caliper.
First loosen the pad pin, and loosen the caliper bolt next.
Remove the pad pin and then remove the pad.
After that, remove the caliper support.
Cleaning the caliper and piston.
Remove the bracket holding the pad.
Clean the pad pin and bracket with neutral detergent.
Use a brush. Wash the caliper as well.
Rotate the piston using a caliper piston tool.
Replace brake pads.
Apply some grease where the pad has contact with the caliper; the sliding section, back of the piston, backside of the plate, the pad pin; thread of the pad pin to prevent it from getting stuck; and the caliper bolt as well.
Mounting caliper.
Fasten the bolt with proper torque using a torque wrench.
Squeeze the brake several times until you feel it touching the brake.
Пікірлер: 5
I am pretty fussy myself about motorcycles and maintenance ( at the end good maintenance is a large part of the plan to stay alive) but this has to be the most thorough exchange of brake pads I have seen in my life (and I am not that young). Thanks for posting and providing the English translation so the rest of the world can benefit too.
tq for info👍
i have 2 questions 1. the spray you apply is not the wd40 right? 2. what is brake pad grease? thank you o/
Mad work for the 250, on my R6 I just remove the pads while the caliper is on the bike, push the pistons back, and slide the new ones in.
Kol