This was so incredibly helpful and easy to understand. I was starting to lose my mind. Thank you so much!!

@DaddingAllDay

2 жыл бұрын

You're very welcome

For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. kzread.infoUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.

@DaddingAllDay

10 ай бұрын

Thank you!

This was the easiest tutorial about this installation I found. Thank you!

@DaddingAllDay

Жыл бұрын

Perfect! I'm glad to hear it. Thank you for watching.

Thanks Chuck, I had a hard time locating info on the dual blade assembly. I have the Ryobi 40 Trimmer. It appears I don’t have to take off the entire head.

Well on your way to mastering all this mechaniacle stuff! Read, Comprehend, Do. First time, Novice. Second time, Journeyman. Third time, Pro. Fourth time, Master! The beard rocks! I'm 67 and can't match it so I'm a little...no, not jealous. Call it admiration.

@DaddingAllDay

3 жыл бұрын

Hahahaha! Thank you sir. I don’t know how much longer I’ll have the beard, but I’m enjoying the ride.

See you tonight, Chuck! Great video as always!

Lol KZread SAVES THE DAY AGAIN!!!! Thank you for posting this!!!

@DaddingAllDay

2 жыл бұрын

You're very welcome!

Thankyou so much, would have never figured out how to remove the old head.

@DaddingAllDay

Жыл бұрын

I'm glad my video was a help.

Straight up☝💯🔥👏👏Glad you made this video and actually showed the processes! Thank you👍👍

You saved so much of my time! Thank you!

@DaddingAllDay

Жыл бұрын

You're very welcome!

I can’t find the hole you were talking about. I have a gas powered Ryobi extend it, can’t take the bottom part of the head off.

@DaddingAllDay

22 күн бұрын

It maybe a different head. They have different heads in most models

Thank you !! Only source of information I got on this 🙏

@DaddingAllDay

Жыл бұрын

You're welcome!!!

Let's see that thing in action!

Very useful thanks. If you make more videos try to put more light on the items, that will make things clearer.

@DaddingAllDay

2 жыл бұрын

I make a lot of videos, this one was last minute so I didn’t use a normal set up. Thank you for the feedback

thanks that helped me a ton.

@DaddingAllDay

2 жыл бұрын

Awesome! I'm glad it was able to help.

Losing my mind here. I have a newer 18 volt, looks like the head is different from what you are working on. I can't find the place to remove it. Any ideas?

@DaddingAllDay

11 ай бұрын

I'll do some digging and see what I find.

Good try. The one you showed is a 40v. My 18v trimmer looks different. Could you do one with the 18v guy ? Thank u

@DaddingAllDay

Жыл бұрын

They make an 18v with that head as I owned on prior to getting this one. Ryobi makes too many variations of a tool that does one thing.

@less2455

Жыл бұрын

@DaddingAllDay Thanks for your explanation. Have you seen a video with the 18v smaller head version ? This video showing 18v and 40v guys are quite beefier and of a different design. I need help to remove 18v head. Thanks guys.

Thank you. A little stronger lighting would help old folks like me see the video better. Other than that great information

@DaddingAllDay

Жыл бұрын

Sorry about that. Very impromptu video, so I didn't have my normal setup

How did you tighten the "bottom bit" before completing the assembly of the serrated head?

@DaddingAllDay

2 жыл бұрын

It just clicks into place.

@SlamBradley

2 жыл бұрын

@@DaddingAllDay mine must be defective. 😬

Will this work for the Ryobi AutoFeed trimmers?

@DaddingAllDay

10 ай бұрын

I'm not sure. This one was a bump feeder.

ryobi p20102vnm is not compatible with ac053n1fh reel easy

Does anyone know of the edger head can be replaced with the trimmer head?

@DaddingAllDay

2 жыл бұрын

I'm not sure.

I need the part number/name for the pin that holds the blades... mine sheared and I can't seem to find a replacement

@DaddingAllDay

Жыл бұрын

I'm sorry, but I don't have it. I'll double check but I can't find my instructions.

@cherrin13

Жыл бұрын

I just bought a new head for $35 or so. My ADD told me I should buy a cheap lathe and a drill press and start me a replacement parts business...

👍🏻

First. That is like a mini brush hog. 😆😆

Goodness, get to the point

@DaddingAllDay

Жыл бұрын

Thanks for the advice. Have a great day.

Mate I can’t get past the first step. Separating the upper and lower housing.

@DaddingAllDay

11 ай бұрын

Hmmmm.... Is the model exactly the same. Ryobi tends to differ from models.

@leonetoll2236

11 ай бұрын

@@DaddingAllDay I’m not sure but a customer of mine got it apart. I just haven’t got the hand girth for it. 🙏🏻 for responding.

Too bad this is not helpful for the newer models ... no way to remove the head at all on those

@DaddingAllDay

10 ай бұрын

Unfortunately not.