How to repair a broken cable on blade engage riding lawnmower with a nut and bolt.
Жүктеу.....
Пікірлер: 20
@earl6969Ай бұрын
Did this yesterday. Used a 10 mm small head from honda. Dremeled a slot in the head and added a 10mm nut then slid it in the spring,drilled it out and used the longer bolt along with a jam nut on assembly.I inserted the screwdriver into the spring and used the nut to bring the bolt to lenght for any adjustments. Worked like a charm. Thanks for the idea ❤
@boxelder9167
Ай бұрын
Excellent! Glad you found it useful and sorry for the quality as the formatting clipped out the parts I was trying to show.
@yourworstfear2 ай бұрын
cheaper to buy and its right and safe
@dalemihocik473210 күн бұрын
That is so much smarter than spending the $8 for a new one.
@boxelder9167
10 күн бұрын
It’s the 3rd one to break. 8x3=$24 + 3 day wait for the part. That’s 1 hour total time fixing the same issue @ $65 an hour for $89 dollars total investment. My fix took 15 minutes, didn’t cost anything, and never broke again. Every one has to pay one way or another and factor in how much down time they can afford.
@dalemihocik4732
10 күн бұрын
@@boxelder9167 You can't argue logic like that.
@boxelder9167 Жыл бұрын
Attachment of a cable to a bolt clarified. kzread.info/dash/bejne/dWiixsGEgN2xeMY.html Clarification of this video. Sorry for the formatting error cutting off the important details.
@grdelawter4266 Жыл бұрын
I’ve got the same crappy toro mower. I had to buy the part you fixed. It’s a great idea. Your photography sucks, bad. I’ve also disconnected every safety switch to prevent me from blowing this piece of S#]£ up.
@boxelder9167
Жыл бұрын
kzread.info/dash/bejne/dWiixsGEgN2xeMY.html The formatting cut off the top of the image. I was looking through the camera when I shot the video and it was cropped out when it downloaded. I think I just need to shoot it again. This video has a better picture of the hole in the bolt. Also I have bypassed the safety switches on mine too. Nothing is more frustrating than stopping the mower to move something then getting back on and it won’t start again until you figure out what safety switch didn’t work properly. I have 2 motors for this mower or I would have pushed it off a cliff already.
@grdelawter4266
Жыл бұрын
Ya got that right! I would have blown mine up except I don’t have any explosives and there are no cliffs nearby! Mine is a piece of crap. I can’t afford a new one that is a quality mower. Anyway, thanks for the video, it’s a great idea!
@boxelder9167
Жыл бұрын
@@grdelawter4266 - I have some explosives if you want to get together and blow them up for a video but I am going to have to ask you to film because I suck at it but I am good at blowing things up.
@charleswieand4445 Жыл бұрын
No flat washers to help spread the stress on cable
@boxelder9167
Жыл бұрын
I thought about it but I would have to open the hole up a little more to get the cable in. The nut worked so I went with it to make sure it held and it’s stronger than the factory made one.
@andrew4403 Жыл бұрын
You're not showing anything you can't even see what you're doing Cameron's not on nothing
@boxelder9167
Жыл бұрын
The original version was good but the format cropped it out. I posted it anyway because it still gives you enough information to make the same thing. Unfortunately I don’t have a way to hold my camera and also work with both hands. I have asked people for help to film what I am working on and they look at me like I’m trying to get them to swim naked in a public pool so I am trying to figure out how to make videos without having to stop everything I am doing and set up. I have also put my camera on in my shirt pocket so that I can film with both hands but if I am sweating it activates the touch screen every time I move. But you are correct. I need to reshoot this but I was trying to finish mowing before the rain started.
@boxelder9167
Жыл бұрын
Attachment of a cable to a bolt clarified. kzread.info/dash/bejne/dWiixsGEgN2xeMY.html Let me know if this helps you out and if not I’ll take the mower back apart and redo the first video.
@charleswieand4445
Жыл бұрын
Tri pod . My son does videos said watch a lot of of how to dos . Thats what he does . Wild Charles Show
@andrew4403
Жыл бұрын
It's okay bud I understand 👍 at least you're trying. Like they were saying maybe a tripod or something might help. Keep making videos I'll keep watching 👍
@davidbertrand68842 ай бұрын
Dude 🫵🏻 Need to ZOOM OUT, so redo your entire video…..right now I give 🫵🏻a 👎🏻 on your fix…..4.24.2024 🇺🇸
Пікірлер: 20
Did this yesterday. Used a 10 mm small head from honda. Dremeled a slot in the head and added a 10mm nut then slid it in the spring,drilled it out and used the longer bolt along with a jam nut on assembly.I inserted the screwdriver into the spring and used the nut to bring the bolt to lenght for any adjustments. Worked like a charm. Thanks for the idea ❤
@boxelder9167
Ай бұрын
Excellent! Glad you found it useful and sorry for the quality as the formatting clipped out the parts I was trying to show.
cheaper to buy and its right and safe
That is so much smarter than spending the $8 for a new one.
@boxelder9167
10 күн бұрын
It’s the 3rd one to break. 8x3=$24 + 3 day wait for the part. That’s 1 hour total time fixing the same issue @ $65 an hour for $89 dollars total investment. My fix took 15 minutes, didn’t cost anything, and never broke again. Every one has to pay one way or another and factor in how much down time they can afford.
@dalemihocik4732
10 күн бұрын
@@boxelder9167 You can't argue logic like that.
Attachment of a cable to a bolt clarified. kzread.info/dash/bejne/dWiixsGEgN2xeMY.html Clarification of this video. Sorry for the formatting error cutting off the important details.
I’ve got the same crappy toro mower. I had to buy the part you fixed. It’s a great idea. Your photography sucks, bad. I’ve also disconnected every safety switch to prevent me from blowing this piece of S#]£ up.
@boxelder9167
Жыл бұрын
kzread.info/dash/bejne/dWiixsGEgN2xeMY.html The formatting cut off the top of the image. I was looking through the camera when I shot the video and it was cropped out when it downloaded. I think I just need to shoot it again. This video has a better picture of the hole in the bolt. Also I have bypassed the safety switches on mine too. Nothing is more frustrating than stopping the mower to move something then getting back on and it won’t start again until you figure out what safety switch didn’t work properly. I have 2 motors for this mower or I would have pushed it off a cliff already.
@grdelawter4266
Жыл бұрын
Ya got that right! I would have blown mine up except I don’t have any explosives and there are no cliffs nearby! Mine is a piece of crap. I can’t afford a new one that is a quality mower. Anyway, thanks for the video, it’s a great idea!
@boxelder9167
Жыл бұрын
@@grdelawter4266 - I have some explosives if you want to get together and blow them up for a video but I am going to have to ask you to film because I suck at it but I am good at blowing things up.
No flat washers to help spread the stress on cable
@boxelder9167
Жыл бұрын
I thought about it but I would have to open the hole up a little more to get the cable in. The nut worked so I went with it to make sure it held and it’s stronger than the factory made one.
You're not showing anything you can't even see what you're doing Cameron's not on nothing
@boxelder9167
Жыл бұрын
The original version was good but the format cropped it out. I posted it anyway because it still gives you enough information to make the same thing. Unfortunately I don’t have a way to hold my camera and also work with both hands. I have asked people for help to film what I am working on and they look at me like I’m trying to get them to swim naked in a public pool so I am trying to figure out how to make videos without having to stop everything I am doing and set up. I have also put my camera on in my shirt pocket so that I can film with both hands but if I am sweating it activates the touch screen every time I move. But you are correct. I need to reshoot this but I was trying to finish mowing before the rain started.
@boxelder9167
Жыл бұрын
Attachment of a cable to a bolt clarified. kzread.info/dash/bejne/dWiixsGEgN2xeMY.html Let me know if this helps you out and if not I’ll take the mower back apart and redo the first video.
@charleswieand4445
Жыл бұрын
Tri pod . My son does videos said watch a lot of of how to dos . Thats what he does . Wild Charles Show
@andrew4403
Жыл бұрын
It's okay bud I understand 👍 at least you're trying. Like they were saying maybe a tripod or something might help. Keep making videos I'll keep watching 👍
Dude 🫵🏻 Need to ZOOM OUT, so redo your entire video…..right now I give 🫵🏻a 👎🏻 on your fix…..4.24.2024 🇺🇸
@boxelder9167
2 ай бұрын
kzread.info/dash/bejne/dWiixsGEgN2xeMY.htmlfeature=shared