Ive got a slightly different model of mower. Had to take out the battery and not the gas tank. Other than that, you walked me right through the repair. Thanks for the help.

@hester781

9 күн бұрын

Yea I should’ve mentioned that there are different iterations lol, glad I could help in anyway I could!👍🏻

Thank you so much! You just saved me a lot of money! Fixed my 25 year old mower in 15 minutes!

@hester781

10 ай бұрын

Excellent! Glad I was able to help👍🏻

Thank you so much for the very detailed video with great commentary! Very useful for a craftsman owner but a non-mechanical woman! Thanks so much!

@hester781

4 ай бұрын

Thank you! Glad you enjoyed it! 👍🏻

Thanks,watched several vids first ,best I found

@hester781

Ай бұрын

Thank you very much! Glad I could help 👍🏻

Brotherman this video just saved me a hassle and a half. I just changed the oil, spark plug, new blades, and fresh tires on my LT2000 and hopped on so excited to test my new mulching blades (switched from bagged for the first time). Started er up and went to actuate the blades and the damn cable popped out and told me "you seriously thought this was gonna be a smooth day didnt ya??" This doesnt look like such a bad job and gives me a great opportunity to pressure wash the deck

@hester781

3 ай бұрын

That’s the worst! Best of luck with the job 👍🏻

I've run my shop the same way since I started messing with small engines 30 years ago Hester. Friends, family and now anyone that has heard of me knows its my hobby and that I have the right to scold them as needed. 🤣👍 Brandon's cable tool is awesome, works great for sure. Nice video brother.

@hester781

Жыл бұрын

That’s the cost of doing business! What they save in labor, they pay for in shame😂😂

@Big_Johns

Жыл бұрын

Exactly 🤣👊

@tommcg666

Жыл бұрын

30 years years ? you're only 29

@Big_Johns

Жыл бұрын

@@tommcg666 LoL, yeah that’s right…. 29. 🤣👍🏼

I hardly ever get a easy job like this but I still keep the cables and they change them 😊

@hester781

2 ай бұрын

Every now and then you get lucky with a simple job 👍🏻

Very good explaining and telling the customer to keep clean the mower 👌

@hester781

11 ай бұрын

Thank you!👍🏻

Awesome great to see the tool in use

@hester781

Жыл бұрын

It really works great! I’ve told every tech I know to grab one👍🏻

@BSSMALLENGINES

Жыл бұрын

@@hester781 i appreciate it

great repair video ,knew you were a pro machanic when i saw you're t shirt, great channel thanks.

@hester781

Жыл бұрын

Thank you! I’m a sucker for merchandise 😂👍🏻

Hell yes you made easy peasy for sure, simple enough.

@hester781

11 ай бұрын

Thank you! 👍🏻

Great video helped me out greatly made it so easy thank you. Lots Chris K

@hester781

3 ай бұрын

Awesome! Glad I could help 👍🏻

Thanks changed my cable in about 10 mins thanks to you

@hester781

2 ай бұрын

Awesome! Glad I could help 👍🏻

Very well done showing the process. Thank you. Great to find a vid that shows the same mower style as mine. Your table and winch setup is awesome !! Subscribing now.

@hester781

2 ай бұрын

Thank you! I don’t know what I’d do without the winch! Welcome to the channel! 👍🏻

Awesome job.. i need to do the same thing.. looks simple to do...Great video

@hester781

Жыл бұрын

Thank you! 👍🏻

Thanks for putting the parts number in there as well.

@hester781

9 ай бұрын

No problem 👍🏻

Your response to your friend on text “You Animal” 😂😂😂😂😂👍

@hester781

Жыл бұрын

I don’t pull my punches 😂😂

I rather be a dirty, rotten, no good liar than a dirty, rotten, no good deck LOL. Great tip on the blade alignment for deck damage. Every tractor that gets new blades gets high lift gators. TBH, considering its age...its in great shape...your friend did a good job.

@hester781

Жыл бұрын

Thank you sir! I couldn’t agree more with using highlift gators! I tried to tell him, but he is stubborn and set in his ways, maybe he will see this comment and change his mind lol👍🏻

What size is that washer for the top of the spindle for blade engagement cable

@hester781

3 ай бұрын

I believe it’s a 5/16 but Not 100% sure, any size that fits will work 👍🏻

Great video, thanks

@hester781

Жыл бұрын

Thank you! Glad you liked it 👍🏻

Where did I go wrong? After changing the blade engagement cable now the lever is very hard to raise up into the detent position. Could the new spring be excessively tight or is it possible to have pinched the cable somewhere? Ready to toss some wrenches over this mess up.

@hester781

27 күн бұрын

I would check the tensioner on the deck and make sure it isn’t seized/ rusty and can move freely back-and-forth. That’s the number one cause for these cables to break.

I need to replace the cable on my lt2000. Due to someone bending the spring and hooking it up to a belt guide lol. Do you have the part number for the cable?

@hester781

Жыл бұрын

Ugh, I’ve seen that before lol, The part number for the one I used is 175067, hope this helps 👍🏻

Hey! Awesome video. I have the same mower and just replaced the plate on the deck that wears and the cable but now it takes almost all of my force to get the blade engagement handle up and when I do the deck shakes violently which it didn’t do before. Any tips?

@hester781

4 күн бұрын

Hmm it sounds like something might be binding on the deck side. I would double check your pulleys and belt routing and if those are fine, try taking the belt off of the engine pulley and engaging the blades (engine off) if it’s still feels hard to engage I would suspect the tensioner is binding

What if when you engage the blades its very difficult. Should you stretch the new spring or what do you suggest

@hester781

Жыл бұрын

The only 2 things that would make engaging the blade difficult would be rust in the cable or the pivot for the belt tensioner arm where the spring attaches is rusty and needs to be lubricated. Let me know if this helps 👍🏻

I have the same mower Why are the blades only partially sharp on each end? And not 4-5 more inches on each end? Is there a reason for that? Wouldn’t it cut more/better if it had a longer edge?

@hester781

4 ай бұрын

Some blades do have a longer sharp area, however 90% of the cutting is done by the first 2 inches of the blade. Which is why mulching blades have more cutting edge along the whole blade to cut the already cut grass into tiny bits, vs a standard high lift blade which lifts the grass up, cuts, and bags/discharges in one swift motion.

@chrisb.1301

4 ай бұрын

Ahhh ok makes sense now. Thanks for the quick reply! Have a good rest of your Sunday!!!

Best to keep an extra cable on the wall 😢. It’s common problem 😊

@hester781

27 күн бұрын

I usually do 👍🏻

Hester sounds like he is from somewheres in Massachusetts.

@hester781

24 күн бұрын

Yes indeed! Central mass 👍🏻

Very good video, and now I am looking for some free advice. When my LT 2000 has been cutting for a while it cuts out ,but if I disengage the drive for the blades it starts again no problem but if i engage the blades again it cuts out again ,any suggestions as to what might be the problem ????

@hester781

11 ай бұрын

If it’s doing it that religiously It almost sounds like a seat safety issue. So a few questions, - does everything sound normal when the blades are engaged, like no loud bearing noises, etc. - do you have to have the blade leaver all the way engaged for the engine to die or does it start shutting off halfway into engaging the lever? - Does your seat Safety have two wires or four?

@johnoflanagan9139

11 ай бұрын

@hester781 thanks for your reply to my question. The mower ticks over beautifully when first started but after about half an hour cutting it cuts out completely, no shuddering just stops like as if you flicked a switch ,if I disengage the blade drive it starts first tip and ticks over beautifully again but ingauge the blade drive again it shudders and cuts out , i taught it was getting a little hot lately ,is there a temperature sensor switch on these mowers ??? And there are 2 wires on the safety switch under the seat which are connected

@johnoflanagan9139

11 ай бұрын

Another answer to one of your earlier questions, After half an hour cutting it cuts out. If I disengage the blade drive, it starts normally again but when I start to engage the lever it starts to shudder badely and cuts out again.

@hester781

11 ай бұрын

@@johnoflanagan9139 it sounds like one of the safeties are activating and killing the motor. I would try taping down the blade engage safety button so that the machine thinks that the blades are always disengaged. If you do that in the mower doesn’t die anymore then you know you have either a wiring issue or a safety switch issue.

@johnoflanagan9139

11 ай бұрын

@hester781 sorry for my ignorance, but what is the blade safety button ,and where is it located ???

Leaving them out in the rain will run these cables with rust I put a lot of grease on cable upper end to keep water out

@hester781

2 ай бұрын

Agreed, people would be surprised what a little bit of grease will do 👍🏻

How much would a job like this costs?

@hester781

Жыл бұрын

Depends on the shop you bring it to. It’s about an hours labor plus cost of parts

New PTO cable and cutting blades

@hester781

11 ай бұрын

Yes sir 👍🏻

Those are green mulching blades

@hester781

11 ай бұрын

Yes they are 👍🏻