Videos like this is what I'm looking for. Simple, clear and easy. Thank a lot!

@Pritchboy380

7 ай бұрын

😂😂q 😂😂😂😂😂😂😂😂😂😂😂

Great video. Just wanted to add that this is the best tool to use in tight spaces, such as when the head is still on the engine. His techniques will be the same, except you'll need compressed air blown down the spark plug hole to keep the valve in place. Also, make sure your cam is in the correct position.

Thank you! Clear and concise video.

Good video, it told me what I needed to know. Thanks!

I like your simple presentation man and this is helping a lot on my projects.keep it up.

@CarsSimplified

6 жыл бұрын

Thanks, glad I helped! Best of luck with your projects!

I agree , great video . I am doing this procedure with head installed .

Very useful information and straight to the point thanks

I watched your video and it was very helpful thank you

Thank you for your demonstration....

thank you

Just subscribed simple and easy thanks bro

Great video.

Helpful tool!

I like that trick at the end

it is great tool thank you

Brumby......the man

well done thx

I could really use some help, I need inexpensive valve spring compressor for Chrysler 3.5L. 2004 Pacifica. Would this work?. Bent few exhaust valves. Going to fix myself. Any help is appreciated..

have you ever had it where your using a compressor and right when you get it passed the keepers and free they make a pop sound. i have dirtbike with a dual valve spring design there was pop on all of them. nothing was damaged. just thought i ask. sound was like removing a suction cup

thanks

The only difference is my engine is not in the table is in the damn car, but your video is greatly appreciated thanks

can use this tool for motorcycle?? my model is xtz 750 super tenere

After removal of said camshafts, timing chain/belt, cam gears, valves, and valve springs. How will you know that the timing is correct and what position the camshafts should be in??

如果我没有把head拆下来，像这样拆弹簧换seal，valve会掉下去吗？ 有方法不让valve掉下去吗？

Do you know if this works on a 2.7l v6 ?

Awsome

I just use a big socket and a hammer. Works every time.

I've seen videos on how to use a rope I can't afford a mechanic so I have to try to do it myself and don't Know about cars but I need the car for work

would automotive valve compressor tool works on motorcycle valve? I'm looking to loose a stuck intake valve with the rope method inside cylinder to keep it in placed. Motorcycle engine is smaller compare to car engine. Would this tool work on the small valves? Thanks

@jeanjacque1577

2 жыл бұрын

Socket and hammer that tool works to put them on but I prefer a socket and hammer to get them off. I could have all 6 off by the time he finished 1

@Fieldyfan94

Жыл бұрын

@@jeanjacque1577ok how do you get them back on when you do that technique I did it and can’t get them back in

I bought a tool just like that i dont understand mine keeps slipping out of springs i attempted like 7 and it just keeps poping out. I even try to hold the 2 bottom jaws that holds the spring and it still slips hit my hand twice ouch

@BIGlittleDaddy2

4 жыл бұрын

Willy Garcia exactly the shit doesn’t work on real engines don’t know what engine he’s working on. I’m working on my 350 Chevy and that tool is a piece shit. The bottom of the tool needs to be curved up to stay on the spring during compression

@impactrc6427

4 жыл бұрын

Biglil Daddy fucking tool is garbage

@NickyShweety

4 жыл бұрын

@@BIGlittleDaddy2 same for me haha. Except 305 sbc. I put vice grips around the puller hooks to hold them on

@OutdoorOkie

3 жыл бұрын

@@NickyShweety did it work?

@NickyShweety

3 жыл бұрын

Yeah it worked

I brought this tool today, so I could replace my valve seals. I got one off without no problem. But the second one, gave me drama. I tried to find something to place under the valve, so it could stay in place. I have to find something soft & sturdy, go up under there. So, will try again tomorrow.

not fit for my xtz 750 smol space...

What about the valve falling in engine

@jzak5723

3 жыл бұрын

You have to rotate the engine manually (wrench on crankshaft pulley bolt head) until the piston is near the bottom of its stroke in the cylinder being worked on. Take spark plug out from the cylinder, and shove in some 1/4" rope through the spark plug hole until you have about a foot of rope or so into the cylinder (letting some rope hang out of the spark plug hole), then rotate the engine manually until the piston pinches the rope in the top of the cylinder and will be holding the bottom of the valve all the way up so it won't fall down into the cylinder when you take the valve spring out.

This is good for big engines otherwise is not good for smaller engines

Jossss gandosss

Bought one of these, fell apart in about 5 min.

This tool isn't OK for small springs

@culebrasty

Жыл бұрын

How about Honda civic?

You didn’t even show the entire process....

That tool is usless